Re: ppp connection
Check and make sure that your password and username are correct. I keep
mine in a /etc/ppp/pap-secrets file.
Keith
nfn11988@naples.net
You only get one chance at life, but if you do it right, you only need one.
http://www.naples.net/~nfn11988
On Sat, 18 Jul 1998, John McPeek wrote:
> I can't make a ppp connection. This is a sample of my PPP.LOG
>
> Jul 18 09:48:39 Hal-9000 pppd[157]: unrecognized option 'ok'
> Jul 18 09:50:11 Hal-9000 pppd[162]: pppd 2.3.5 started by root, uid 0
> Jul 18 09:50:43 Hal-9000 pppd[162]: Terminating on signal 15.
> Jul 18 09:50:44 Hal-9000 pppd[162]: Exit.
> Jul 18 09:50:50 Hal-9000 pppd[165]: pppd 2.3.5 started by root, uid 0
> Jul 18 09:50:50 Hal-9000 pppd[165]: Using interface ppp0
> Jul 18 09:50:50 Hal-9000 pppd[165]: Connect: ppp0 <--> /dev/tty1
> Jul 18 09:51:11 Hal-9000 pppd[165]: Terminating on signal 15.
> Jul 18 09:51:17 Hal-9000 pppd[165]: Connection terminated.
> Jul 18 09:51:17 Hal-9000 pppd[165]: Receive serial link is not 8-bit
> clean:
> Jul 18 09:51:17 Hal-9000 pppd[165]: Problem: all had bit 7 set to 0
> Jul 18 09:51:18 Hal-9000 pppd[165]: Exit.
> Jul 18 09:51:44 Hal-9000 pppd[171]: pppd 2.3.5 started by root, uid 0
> Jul 18 09:51:45 Hal-9000 chat[172]: abort on (BUSY)
> Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO CARRIER)
> Jul 18 09:51:45 Hal-9000 chat[172]: abort on (VOICE)
> Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO DIALTONE)
> Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO ANSWER)
> Jul 18 09:51:45 Hal-9000 chat[172]: send (ATZ^M)
> Jul 18 09:51:45 Hal-9000 chat[172]: expect (OK)
> Jul 18 09:52:30 Hal-9000 chat[172]: alarm
> Jul 18 09:52:30 Hal-9000 chat[172]: Failed
> Jul 18 09:52:30 Hal-9000 pppd[171]: Connect script failed
> Jul 18 09:52:31 Hal-9000 pppd[171]: Exit.
> Jul 18 09:59:56 Hal-9000 pppd[138]: pppd 2.3.5 started by root, uid 0
> Jul 18 09:59:56 Hal-9000 pppd[138]: Using interface ppp0
> Jul 18 09:59:56 Hal-9000 pppd[138]: Connect: ppp0 <--> /dev/tty1
> Jul 18 10:00:26 Hal-9000 pppd[138]: LCP: timeout sending Config-Requests
>
> Jul 18 10:00:26 Hal-9000 pppd[138]: Connection terminated.
> Jul 18 10:00:26 Hal-9000 pppd[138]: Receive serial link is not 8-bit
> clean:
> Jul 18 10:00:26 Hal-9000 pppd[138]: Problem: all had bit 7 set to 0
> Jul 18 10:00:27 Hal-9000 pppd[138]: Exit.
> Jul 18 13:35:17 Hal-9000 pppd[136]: pppd 2.3.5 started by root, uid 0
> Jul 18 13:35:18 Hal-9000 chat[137]: abort on (BUSY)
> Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO CARRIER)
> Jul 18 13:35:18 Hal-9000 chat[137]: abort on (VOICE)
> Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO DIALTONE)
> Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO ANSWER)
> Jul 18 13:35:18 Hal-9000 chat[137]: send (ATZ^M)
> Jul 18 13:35:18 Hal-9000 chat[137]: expect (OK)
> Jul 18 13:36:03 Hal-9000 chat[137]: alarm
> Jul 18 13:36:03 Hal-9000 chat[137]: Failed
> Jul 18 13:36:03 Hal-9000 pppd[136]: Connect script failed
> Jul 18 13:36:04 Hal-9000 pppd[136]: Exit.
>
> I type pon and nothing happens. I tryed running pppconf and I put all
> the info in again.
> I think I did have a com port conflict but I disabled the m/b com 2 and
> IRQ 3(the ones my modem uses) and it show up correctly during boor up
> but no change to the problem.
>
> Any words of wisdom?
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
>
--
Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
Reply to: