Re: epic100

[Gergely Madarasz <gorgo@caesar.elte.hu>]

On Fri, 12 Jun 1998, Dr. Juergen Schnack wrote:

> I am running linux 2.0.30 on a dual pentium II machine. Last friday
> I installed a smc ethernet card using the
> SMC EPIC/100 83C170 Ethernet Controller. The driver epic100, see
> http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html
> does fine, but the card reports
> Jun 12 07:36:45 obelix kernel: eth0: PCI Bus Error!  EPCI status 258801.
> 
> Jun 12 07:37:05 obelix kernel: eth0: PCI Bus Error!  EPCI status 2588c1.
> 
> So, I suspect that the bus error was already there and that the
> new card is the only device that reports the error.
> 
> Is there anybody who could give some advise or guess what to do?

Try 2.0.34 ... it has the latest epic100 driver included.

Greg

--
Madarasz Gergely           gorgo@caesar.elte.hu         gorgo@linux.rulez.org
      It's practically impossible to look at a penguin and feel angry.
          Egy pingvinre gyakorlatilag lehetetlen haragosan nezni.
              HuLUG: http://www.cab.u-szeged.hu/local/linux/


--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org