SCSI Adaptec AHA 1520B/1522B ISA (iomega jaz jet) Trouble.
Hi, at the bottom is my var/adm/messages file.
The problem is this:
When i boot to get the adapter recognized i have to append
aha152x=0x340,11,7,1.
The card is recognized and also the jaz drive. But no partition is
reported and a "scsi: detected total." is displayed.
/proc reports both the adapter and the jaz drive but when i try to access
the jaz disk (/dev/sda) or partition (/dev/sda4) i get a "coud not open
device /dev/sda" or
something like that. And after that all the entries in /proc disapear.
Any suggestion would be wellcomed.
Chao.
______________________________________________
Felipe Alvarez Harnecker <fealvar@ctc.cl>
Compañia de Telecomunicaciones de Chile.
Telefono: 691.30.56
Licenciado en Matemáticas y Computación
Pontificia Universidad Católica de Chile.
Potenciado por Debian GNU/Linux
http://www.debian.org
______________________________________________
---------- Forwarded message ----------
Date: Thu, 19 Feb 1998 16:13:49 -0300 (CLST)
From: root <root@godzilla.ctc.cl>
To: fealvar@ctc.cl
Feb 19 10:27:05 godzilla kernel: aha152x: processing commandline: ok
Feb 19 10:27:05 godzilla kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Feb 19 10:27:05 godzilla kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Feb 19 10:27:05 godzilla kernel: aha152x: trying software interrupt, ok.
Feb 19 10:27:05 godzilla kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
Feb 19 10:27:05 godzilla kernel: scsi : 1 host.
Feb 19 10:27:05 godzilla kernel: Vendor: iomega Model: jaz 1GB Rev: J.83
Feb 19 10:27:05 godzilla kernel: Type: Direct-Access ANSI SCSI revision: 02
Feb 19 10:27:05 godzilla kernel: scsi : detected total.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: