ppp help
Hello!
I am trying to dial in with my linux box to cisco with PAP.
I get authorized etc... but my syslog says this:
Nov 24 21:13:22 stealth kernel: ippp0: dialing 0 1691140...
Nov 24 21:13:22 stealth kernel: isdn_net: ippp0 connected
Nov 24 21:13:22 stealth kernel: isdn_net: chargetime of ippp0 now 29698
Nov 24 21:13:22 stealth ipppd[246]: Local number: 0611421240, Remote
number: 1691140, Type: outgoing
Nov 24 21:13:22 stealth ipppd[246]: PHASE_WAIT -> PHASE_ESTABLISHED,
ifunit: 0, linkunit: 0, fd: 7
Nov 24 21:13:22 stealth ipppd[246]: sent [0][LCP ConfReq id=0x1 <mru 1500>
<auth pap> <magic 0xcc32> <MPmrru 0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 6d 94
00 00 ]>]
Nov 24 21:13:25 stealth ipppd[246]: sent [0][LCP ConfReq id=0x1 <mru 1500>
<auth pap> <magic 0xcc32> <MPmrru 0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 6d 94
00 00 ]>]
Nov 24 21:13:25 stealth ipppd[246]: rcvd [0][LCP ConfReq id=0x16 <auth
pap> <magic 0x61ea3adb>]
Nov 24 21:13:25 stealth ipppd[246]: sent [0][LCP ConfAck id=0x16 <auth
pap> <magic 0x61ea3adb>]
Nov 24 21:13:26 stealth ipppd[246]: rcvd [0][LCP ConfRej id=0x1 <MPmrru
0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 6d 94 00 00 ]>]
Nov 24 21:13:26 stealth ipppd[246]: sent [0][LCP ConfReq id=0x2 <mru 1500>
<auth pap> <magic 0xcc32>]
Nov 24 21:13:26 stealth ipppd[246]: rcvd [0][LCP ConfAck id=0x2 <mru 1500>
<auth pap> <magic 0xcc32>]
Nov 24 21:13:26 stealth ipppd[246]: lcp layer is UP
Nov 24 21:13:26 stealth ipppd[246]: sent [0][PAP AuthReq id=0x2
user="proletar" password not logged for security reasons! Use '+pwlog'
option to enable full logging.]
Nov 24 21:13:26 stealth ipppd[246]: rcvd [0][PAP AuthAck id=0x2msg=""]
Nov 24 21:13:26 stealth ipppd[246]: Remote message:
Nov 24 21:13:29 stealth ipppd[246]: rcvd [0][LCP EchoReq id=0x1 61 ea 3a
db 05 06 61 ea]
Nov 24 21:13:29 stealth ipppd[246]: sent [0][LCP EchoRep id=0x1 00 00 cc
32 05 06 61 ea]
Nov 24 21:13:39 stealth ipppd[246]: rcvd [0][LCP EchoReq id=0x2 61 ea 3a
db 3f c2 24 a0]
Nov 24 21:13:39 stealth ipppd[246]: sent [0][LCP EchoRep id=0x2 00 00 cc
32 3f c2 24 a0]
Nov 24 21:13:49 stealth ipppd[246]: rcvd [0][LCP EchoReq id=0x3 61 ea 3a
db 00 00 00 00]
Nov 24 21:13:49 stealth ipppd[246]: sent [0][LCP EchoRep id=0x3 00 00 cc
32 00 00 00 00]
Nov 24 21:13:56 stealth ipppd[246]: sent [0][LCP TermReq id=0x3 61 75 74
68 20 66 61 69 6c 75 72 65]
Nov 24 21:13:56 stealth ipppd[246]: rcvd [0][LCP TermAck id=0x3]
Nov 24 21:13:56 stealth ipppd[246]: Connection terminated.
Nov 24 21:13:56 stealth ipppd[246]: taking down PHASE_DEAD link 0,
linkunit: 0
Nov 24 21:13:56 stealth ipppd[246]: LCP is down
Nov 24 21:13:56 stealth kernel: isdn_net: local hangup ippp0
Nov 24 21:13:56 stealth kernel: ippp0: Chargesum is 0
Nov 24 21:13:56 stealth ipppd[246]: link 0 closed , linkunit: 0
Nov 24 21:13:56 stealth ipppd[246]: reinit_unit: 0
Nov 24 21:13:56 stealth ipppd[246]: Connect[0]: /dev/ippp0, fd: 7
My /etc/ppp/ioptions is:
debug # enable debugging
#kdebug X # set kernel debugging level to X
#nodetach # (no) fork to the background
#callback X # ask for callback (parameter X ?)
#lock # create a lock file for device
#domain X # add domain X to a given hostname
#pidfile X # save pid in file X
#call X # take options from priviledges file (???)
#idle X # idle time limit (seconds)
#holdoff X # holdoff time limit (seconds)
#maxconnect X # set maximum connection time (in seconds ?)
+mp # enable multi line ppp
#+pwlog # log password (WARNING: possible security hole)
#nomagic # magic number negotiation
# ppp handshake : tuning
#silent # don't even try to initiate the connection
#passive # wait for the peer to initiate the connection
#lcp-echo-failure X # consecutive echo failures
#lcp-echo-interval X # time for lcp echo events
#lcp-restart X # Set timeout for LCP
#lcp-max-terminate X # Set max #xmits for term-reqs
#lcp-max-configure X # Set max #xmits for conf-reqs
#lcp-max-failure X # Set max #conf-naks for LCP
# AUTHENTICATION
#name proletar # set local name for auth
user proletar # set name for auth with peer
#usehostname # use hostname for auth
#remotename # set remote anme for auth
#noauth # (dont) require peer (the other) to auth
require-pap # allow only pap authetication
#require-chap # allow only chap authentication
#login # use system password database for pap
#papcrypt # pap passwords are encrypted
# AUTHENTICATION TUNING
#pap-restart X # Set retransmit timeout for PAP
#pap-max-authreq X # Set max #xmits for auth-reqs
#pap-timeout X # Set time limit for peer PAP auth.
#chap-restart X # Set timeout for CHAP
#chap-max-challenge X # Set max #xmits for challenge
#chap-interval X # Set interval for rechallenge
# COMPRESSION
noaccomp # address compression on/off
nopcomp # protocoll field compression on/off
novj # van jacobsen compression on/off
-vj
-vjccomp
novjccomp # van jacobsen connection-ID compression on/off
#vj-max-slots X # tune maximum vj header slots
nobsdcomp # bsd compression on/off
-bsdcomp
nodeflate # deflate compression on/off
-deflate
nopredictor1 # predictor1 compression in/off
noccp # compression negotation on/off
-ccp
# IP NETWORKING
#noip # en/disable ip transfer
#X:Y # set local ip to X, remote ip to Y
0.0.0.0:
noipdefault # don't use name for default ip addr
useifip # use ip addresses form interface
#usefirstip # use first ip from auth file for remote
#netmask X # set netmask X
#nodefaultroute # (dont) set default route
#nohostroute # (dont) set host route
#noproxyarp # (dont) set an proxy arp entry
mru 1524 # set maximum size of recive units to X
#default-mru # disable mru negotation
mtu 1500 # set maximum size of transmit units to X
#useifmtu # use mtu from interface
#ipparam X # set ip parameters in script X
#ms-dns X # dns address for the peers use
#ms-wins X # wins address for the peers use
#set_userip # define valid ip addresses in /etc/ppp/useriptab
ipcp-restart 5 # Set timeout for IPCP
#ipcp-max-terminate X # Set max #xmits for term-reqs
#ipcp-max-configure X # Set max #xmits for conf-reqs
#ipcp-max-failure X # Set max #conf-naks for IPCP
ipcp-accept-local # Accept peer's address for us
ipcp-accept-remote # Accept peer's address for it
# IPX NETWORKING
noipx # en/disable ipx
#ipx-network X # IPX network number
#ipxcp-accept-network # Accept peer netowrk
#ipx-node X # IPX node number
#ipxcp-accept-local # Accept our address
#ipxcp-accept-remote # Accept peer's address
#ipx-routing X # IPX routing proto number
#ipx-router-name X # IPX router name
#ipxcp-restart X # Set timeout for IPXCP
#ipxcp-max-terminate X # max #xmits for term-reqs
ipcp-restart 5 # Set timeout for IPCP
#ipcp-max-terminate X # Set max #xmits for term-reqs
#ipcp-max-configure X # Set max #xmits for conf-reqs
#ipcp-max-failure X # Set max #conf-naks for IPCP
ipcp-accept-local # Accept peer's address for us
ipcp-accept-remote # Accept peer's address for it
# IPX NETWORKING
noipx # en/disable ipx
#ipx-network X # IPX network number
#ipxcp-accept-network # Accept peer netowrk
#ipx-node X # IPX node number
#ipxcp-accept-local # Accept our address
#ipxcp-accept-remote # Accept peer's address
#ipx-routing X # IPX routing proto number
#ipx-router-name X # IPX router name
#ipxcp-restart X # Set timeout for IPXCP
#ipxcp-max-terminate X # max #xmits for term-reqs
#ipxcp-max-configure X # max #xmits for conf-reqs
#ipxcp-max-failure X # max #conf-naks for IPXCP
I entered those extra - options just to be on safe side (besides
nosomething).
Why I can't get IPCP working?
Where am I doing wrong?
Regards,
Iztok
-----------------------------------------------------------------------
InterNet: iztok@ieee.si
Snail Mail: Iztok Umek, Pod vinogradi 39, SI-8351 Straza, Slovenia
URL: http://gea.fri.uni-lj.si/~iztok
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to:
- Follow-Ups:
- Re: ppp help
- From: "Jens B. Jorgensen" <jjorgens@bdsinc.com>