Re: X problem after update from REX to BO (detailed error messages now)
You didn't say (and I can't figure out from your error messages) whether
or not you are using AcceleratedX. If so, you need to go into all of
your font directories and gunzip the fonts, then ncompress them if you
have it, then do the mkfontdir step. AcceleratedX can't do gzipped
fonts, but it does understand compressed fonts. If this is your problem,
I can forward you a message from Xi Graphics support that gives you the
step by step details.
Kevin
On 25 Sep 1997, Andy Spiegl wrote:
> According to Steve Hsieh <steveh@eecs.umich.edu>:
> > I encountered the same problem. Doing a
> >
> > mkfontdir /usr/X11R6/lib/X11/fonts/*
> >
> > seems to fix the problem for Xfree servers; it still doesn't work after
> > that for AcceleratedX though.
>
> Thanks a lot for the hint. Unfortunately it doesn't work for me. :-(
>
> I still get these error messages: (this time all of them)
> XFree86 Version 3.3 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: Jun 2 1997
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.0.21 i486 [ELF]
> Configured drivers:
> Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
> (using VT number 4)
>
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc102"
> (**) XKB: layout: "de"
> (**) XKB: variant: "nodeadkeys"
> (**) Mouse: type: MouseMan, device: /dev/mouse, baudrate: 1200
> (**) Mach64: Graphics device ID: "ATI Graphics Pro Turbo"
> (**) Mach64: Monitor ID: "MAG-MX17S"
> (**) FontPath set to "tcp/localhost:7100"
> (--) Mach64: PCI: Mach64 GX rev 3, Aperture @ 0xfa000000, Sparse I/O @ 0x02ec
> (--) Mach64: card type: PCI
> (--) Mach64: Memory type: 5
> (--) Mach64: Clock type: ATI18818-1/ICS2595
> (--) Mach64: Maximum allowed dot-clock: 135.000 MHz
> (**) Mach64: Mode "1152x864": mode clock = 92.000
> (**) Mach64: Mode "1024x768": mode clock = 85.000
> (**) Mach64: Mode "800x600": mode clock = 50.000
> (**) Mach64: Mode "640x480": mode clock = 31.500
> (**) Mach64: Mode "1280x1024": mode clock = 80.000
> (**) Mach64: Virtual resolution: 1280x1024
> (--) Mach64: videoram: 4096k
> (--) Mach64: Using hardware cursor
> (--) Mach64: Using 8 MB aperture @ 0xfa000000
> (--) Mach64: Ramdac is ATI68860 Rev C
> (**) Mach64: Color weight: 565
> (--) Mach64: Pixmap cache: 1 256x256 slots, 2 128x128 slots, 8 64x64 slots
> (--) Mach64: Font cache: 16 fonts
>
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> _X11TransSocketUNIXConnect: Can't connect: errno = 111
> giving up.
> xinit: Connection refused (errno 111): unable to connect to X server
> xinit: No such process (errno 3): Server error.
>
> Please, please someone help me. It is so frustrating to work on
> the text console only.
>
> TALIA,
> Andy.
> ____________________________________________________________________
> Andy Spiegl, University of Technology, Muenchen, Germany
> E-Mail: spiegl@Appl-Math.TU-Muenchen.de OR: Andy.Spiegl@WriteMe.com
> URL: http://www.appl-math.tu-muenchen.de/~spiegl
> PGP fingerprint: B8 48 24 7B DB 96 6F 1C D9 6D 8E 6C DB C2 E7 E9
> o _ _ _
> --------- __o __o /\_ _ \\o (_)\__/o (_)
> ------- _`\<,_ _`\<,_ _>(_) (_)/<_ \_| \ _|/' \/
> ------ (_)/ (_) (_)/ (_) (_) (_) (_) (_)' _\o_
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ____________________________________________________________________
> Andy Spiegl, University of Technology, Muenchen, Germany
> E-Mail: spiegl@Appl-Math.TU-Muenchen.de OR: Andy.Spiegl@WriteMe.com
> URL: http://www.appl-math.tu-muenchen.de/~spiegl
> PGP fingerprint: B8 48 24 7B DB 96 6F 1C D9 6D 8E 6C DB C2 E7 E9
> o _ _ _
> --------- __o __o /\_ _ \\o (_)\__/o (_)
> ------- _`\<,_ _`\<,_ _>(_) (_)/<_ \_| \ _|/' \/
> ------ (_)/ (_) (_)/ (_) (_) (_) (_) (_)' _\o_
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> --
> TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
> debian-user-request@lists.debian.org .
> Trouble? e-mail to templin@bucknell.edu .
>
>
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: