Re: SB cfg problem - need docs
David_Oswald@prenhall.com wrote:
>
> Hello all...
>
> I recently acquired a Sound Blaster 16 card for my debian box. I
> have seen the card working in a windows machine w/ an ide disk.
>
> After plugging it in and powering up, the card obviously conflicts
> with the adaptec 1542c controller. The machine will not boot.
>
> Unfortunately, the donor of the card has no configuration
> documentation for the SB16 and I need a little help.
>
> Does anybody out there know of a site that contains information for
> the jumpers and configs for this SB16 card?
>
> thanks in advance...
I messed around with a configuration like this for a while, and finally
came up with these settings:
AHA-1542:
Address 0x334-0x337
IRQ 9
DMA 5
SB16:
Address 0x220-0x22f
IRQ 5
DMA 1,1
Also with these settings you can put the MPU at 0x300 if you want.
Bear in mind you will likely have to build a kernel with SB support.
--
Ken Gaugler N6OSK URL: http://www.wco.com/~keng/
"The life of a Repo Man is ALWAYS INTENSE..."
Reply to: