Re: creating custom boot disk
From: Dirk Luetjens <dirk@plus.lfm.rwth-aachen.de>
>> Look for a file "CONFIG" in /usr/src/linux after you've installed the
> I didn't find it.
Oops. It's at the end of this message. Copy it to .config and run
"make menuconfig", "make xconfig", or "make config". Then change
anything you want, or just exit the configuration program. Headers
will be written with your new configuration when the program exits.
> What about the sys_map.gz, and the modules.tgz?
"ps" will work incorrectly if sys_map.gz is not copied from the System.map
generated for the new kernel. It's compressed with gzip to free up space
on the floppy, and of course the MS-DOS filesystem didn't like the name
System.map.gz .
Modules.tgz is modules that work with this kernel. If you are reconfiguring
the same kernel version it will probably work. It's a gzip-compressed
archive created with something like:
cd /
tar cvlzf /mnt/modules.tgz lib/modules/2.0.25
Replace the 2.0.25 with your own kernel version.
> I found on the rescue disk a file named reade.txt, which describes
> also the things to do. The floppy must be mounnted under /mnt to run
> the rdev.sh script correct.
Yes. I'm not sure how much of the rdev stuff is still necessary, as
the syslinux.cfg and command-line parameters override much of it,
but I left it in rather than take time to test if the system still
worked after I removed it.
Thanks
Bruce
#
# Automatically generated by make menuconfig: don't edit
#
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KERNELD=y
#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_M386=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_MD is not set
#
# Networking options
#
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
# CONFIG_ARPD is not set
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
# CONFIG_TCP_NAGLE_OFF is not set
# CONFIG_IP_NOSR is not set
CONFIG_SKB_LARGE=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
#
# SCSI low-level drivers
#
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_DTC3280=y
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
# CONFIG_SCSI_NCR53C7xx_FAST is not set
# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC=y
CONFIG_SCSI_SEAGATE=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_AM53C974=y
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_PPP=m
CONFIG_STRIP=m
CONFIG_WIC=m
CONFIG_SCC=m
CONFIG_PLIP=m
CONFIG_EQUALIZER=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_NET_ALPHA=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_LANCE=y
CONFIG_LANCE32=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=y
CONFIG_VORTEX=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_DEPCA=m
CONFIG_EWRK3=m
CONFIG_SEEQ8005=y
CONFIG_AT1700=m
CONFIG_FMV18X=m
CONFIG_EEXPRESS_PRO=m
CONFIG_EEXPRESS=m
CONFIG_NI52=m
CONFIG_NI65=y
CONFIG_WAVELAN=m
CONFIG_ETH16I=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_HP100=m
CONFIG_NE2000=m
CONFIG_SK_G16=y
CONFIG_NET_EISA=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_DE4X5=m
CONFIG_DEC_ELCP=m
CONFIG_DGRS=m
CONFIG_ZNET=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_ARCNET=m
CONFIG_ARCNET_ETH=y
CONFIG_ARCNET_1051=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
CONFIG_ISDN_MPP=y
CONFIG_ISDN_DRV_TELES=m
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_CDU31A=m
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_SBPCD=m
CONFIG_AZTCD=m
CONFIG_CDU535=m
CONFIG_GSCD=m
CONFIG_CM206=m
CONFIG_OPTCD=m
CONFIG_SJCD=m
CONFIG_CDI_INIT=y
CONFIG_ISP16_CDI=m
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=y
CONFIG_EXT_FS=m
CONFIG_EXT2_FS=y
CONFIG_XIA_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
CONFIG_CYCLADES=m
# CONFIG_STALDRV is not set
CONFIG_RISCOM8=m
CONFIG_PRINTER=m
CONFIG_BUSMOUSE=m
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
CONFIG_MS_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
CONFIG_FTAPE=m
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
CONFIG_ADLIB=y
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_UART6850 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
CONFIG_AUDIO=y
# CONFIG_MIDI is not set
# CONFIG_YM3812 is not set
# CONFIG_SMWAVE is not set
SBC_BASE=220
SBC_IRQ=7
SBC_DMA=1
SB_DMA2=5
SB_MPU_BASE=0
SB_MPU_IRQ=-1
DSP_BUFFSIZE=65536
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
--
Bruce Perens K6BP Bruce@Pixar.com
Finger bruce@master.Debian.org for PGP public key.
PGP fingerprint = 88 6A 15 D0 65 D4 A3 A6 1F 89 6A 76 95 24 87 B3
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-REQUEST@lists.debian.org . Trouble? e-mail to Bruce@Pixar.com
Reply to: