Problem with 3C509 ifconfig
Last night I tried to manually ifconfig my eth0 interface
(3Com 509 combo card), then tried to ping it, and got this:
>ping: sendto: Network is unreachable
>ping: wrote 166.117.11.123 64 chars, ret=-1
>
>--- 166.117.11.123 ping statistics ---
>10 packets transmitted, 0 packets received, 100% packet loss
># netstat -rn
>Kernel IP routing table
>Destination Gateway Genmask Flags MSS Window irtt Iface
>166.117.11.125 0.0.0.0 255.255.255.255 UH 1500 0 0 eth0
>127.0.0.0 0.0.0.0 255.0.0.0 U 3584 0 0 lo
># ifconfig -a
>lo Link encap:Local Loopback
> inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
> UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0
> TX packets:0 errors:0 dropped:0 overruns:0
>
>eth0 Link encap:10Mbps Ethernet HWaddr 00:A0:24:0F:15:63
> inet addr:166.117.11.123 Bcast:166.117.11.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0
> TX packets:0 errors:0 dropped:0 overruns:0
> Interrupt:10 Base address:0x250
>
>
>
Did I forget something? I am pretty sure the card is good, and during
bootup I see that the MAC address is seen by the kernel, with the card
at 0x250 and IRQ 10. Are these settings OK?
Thanks for your help!
---
Key fingerprint = D6 A7 D7 8C 92 CB 42 FD 60 D5 62 1C D7 B9 EA 8E
Ken Gaugler N6OSK Hybrid Networks, Inc. Cupertino, Calif.
URL: www.hybrid.com (home: keng@aimnet.com URL: users.aimnet.com/~keng)
"The life of a Repo Man is ALWAYS INTENSE..."
Reply to: