Re: Adaptec AHA 1542 using port 130
On Tue, 16 Apr 1996, Gerry Jensen wrote:
> Set sw2, sw3, and sw4 to off. BTW, the default for all the switches is
> off which may be what you want.
Oops, that wasn't very informative. Setting sw2, sw3, and sw4 to off
sets the I/O port address to 330-333. sw6, sw7, and sw8 set the BIOS
address with DC000 being the default (when all those switches are off).
sw1 controls plug and play (off = enabled; on = disabled). sw5 controls
the floppy controller (off = enabled; on = disabled).
Hope this helps.
Gerry
Reply to: