[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Kernel 1.3.16 Panic Error



Hi,

I have downloaded the new kernel 1.3,16, compiled it and when I reboot I
have this:

Adding Swap: 130748k swap-space
Unable to handle kernel paging request at virtual address 00000000
current->tss.cr3 = 02c14000, %cr3 = 02c14000
*pde = 02c13067
*pte = 00000000
Oops: 0000
EIP:    0010:0014933f
EFLAGS: 00010202
eax: 00000000   ebx: 00000400   ecx: 00000000   edx: bffff964
esi: 00000000   edi: 00000000   ebp: 02c3f694   esp: 02c15f1c
ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
Process syslogd (pid: 158, process nr: 10, stackpage=02c15000)
Stack: 02c3f694 02c3f620 02c3f694 bffff964 bffff964 00000400 00000000 00000000 
       00000000 00000000 00000000 00000000 001493a0 02c3f694 bffff964 00000400 
       00000000 00000000 00000000 00000000 00000400 00133320 02c3f694 bffff964 
Call Trace: 001493a0 00133320 00120b1c 0010a6f1 
Code: 64 8b 01 89 44 24 1c c7 44 24 28 00 00 00 00 8d 54 24 10 89

I compiled it on two computers and I have the same error.

The two computers are:
1 pentium 90 Eisa/vlb with 48Mb ram + 128 swap. Buslogic+Ultrastor SCSI
Controllers
1 486 Dx2/66 Isa/PCI with 32Mb ram + 128 Swap, Adapted AHA-2940 SCSI controller

Both kernels are compiled with gcc-2.6.3-3.deb.

All the kernels up to 1,3,15 worked ok. I patched the 1.3.15 to go to
1.3.16. I have no *.rej files and it compiled without problem.

I did this to compile:
make oldconfig
make dep
make clean
make zImage
cp -p arch/i386/boot/zImage /drv_c/loadlin
make modules
make modules_install

Any idea?

Thanks,
----
Francois Jaccard


Reply to: