[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: WideScreen problemi



"915resolution" ismindeki toolu kurduktan sonra ekran ayarlarimi 1280x800 cözünürlükte ayarlayabildim. Rahatsizliktan oturu ozur.


On Friday 16 June 2006 11:14, abdullah.teke@ege.edu.tr wrote:
> Elimde intel anakart üzerinde intel chipsetli paylasimli ekran karti ve
> 15.4'' ekranı olan bir notebook var. 1280x800 cözünürlugu
> desteklemesine ragmen debian 1024x768 olarak görmekte israr ediyor.
> xorg.conf dosyası aşağıdaki gibi nerde hata
> yapıyor olabilirim. Teşekkürler.
> 
> 
> 
> Section "Device"
>   identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics
> Controller"
>   boardname "i810"
>   busid "PCI:0:2:0"
>   driver "i810"
>   screen 0
> EndSection
> 
> Section "Monitor"
>   identifier "Generic Monitor"
>   vendorname "Generic"
>   modelname "Flat Panel 1280x800"
>   HorizSync 31.5-90
>   VertRefresh 60
>   modeline  "1280x800@60" 80.14 1280 1344 1480 1680 800 769 772 795 -hsync
> +vsync
>   gamma 1.0
> EndSection
> 
> 
> Section "Screen"
>   Identifier "Default Screen"
>   Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics
> Controller"
>   Monitor "Generic Monitor"
>   DefaultDepth 24
>   SubSection "Display"
>     depth 24
>     modes "1280x800@60"
>   EndSubSection
> EndSection
> Section "DRI"
>   Mode 0666
> EndSection
> Section "device" #
>   identifier "device1"
>   boardname "i810"
>   busid "PCI:0:2:0"
>   driver "i810"
>   screen 1
> EndSection
> Section "screen" #
>   identifier "screen1"
>   device "device1"
>   defaultdepth 24
>   monitor "monitor1"
>   SubSection "Display"
>     depth 24
>     modes "1280x800@60"
>   EndSubSection
> EndSection
> Section "monitor" #
>   identifier "monitor1"
>   vendorname "Generic"
>   modelname "Flat Panel 1280x800"
>   HorizSync 31.5-90
>   VertRefresh 60
>   modeline  "1280x800@60" 80.14 1280 1344 1480 1680 800 769 772 795 -hsync
> +vsync
>   gamma 1.0
> EndSection
> Section "device" #
>   identifier "device2"
>   boardname "VESA driver (generic)"
>   busid "PCI:0:2:1"
>   driver "vesa"
>   screen 0
> EndSection
> Section "screen" #
>   identifier "screen2"
>   device "device2"
>   defaultdepth 24
>   monitor "monitor2"
>   SubSection "Display"
>     depth 24
>     modes "640x480@60"
>   EndSubSection
> EndSection
> Section "monitor" #
>   identifier "monitor2"
>   vendorname "Plug 'n' Play"
>   modelname "Plug 'n' Play"
>   modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
>   gamma 1.0
> EndSection
> 
> 
> 
> 
> 
> 
> 
> 

-- 
Abdullah Teke
(Kampüs Linux Yöneticisi)
----------------------------------
Email: abdullah.teke@ege.edu.tr
Tel  : 0 232 343 40 00 - 5373
Msn  : abdullahteke@hotmail.com



Reply to: