ipw2200 tanıtımı
Biraz ugrastıktan sonra modulu ekledim ve modconf komutu yardımı ile
aktif ettim ama sorun suan surada ben /etc/network/interfaces a girdim
ve dosyanın sonuna
auto eth1
iface eth1 inet dhcp
satırlarını girdim ve dosyayı kaydettim. daha sonra ise asagıdaki komut
verdim ve cıktısı bu oldu acaba sıkıntı ne dir ?
debian:/home/talat# /etc/init.d/networking restart
* /etc/network/options is deprecated.
Setting up IP spoofing protection...done (rp_filter).
Reconfiguring network interfaces...ifup: interface lo already configured
run-parts: /etc/network/if-pre-up.d/whereami exited with return code 1
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
sit0: unknown hardware address type 776
sit0: unknown hardware address type 776
Listening on LPF/eth0/00:40:d0:63:23:03
Sending on LPF/eth0/00:40:d0:63:23:03
Sending on Socket/fallback/fallback-net
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.2
bound to 10.0.0.8 -- renewal in 43200 seconds.
run-parts: /etc/network/if-pre-up.d/whereami exited with return code 1
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
sit0: unknown hardware address type 776
eth1: ERROR while getting interface flags: No such device
sit0: unknown hardware address type 776
Bind socket to interface: No such device
exiting.
Failed to bring up eth1.
done.
Reply to: