Re: meb toshiba debian sarge kurulum yardım gerekiyor
lspci lsusb ve dmesg ekledim; yardimlarinizi bekliyorum,
sisteme takili ek aygit yok.
root@ttyp1[knoppix]# lspci
00:00.0 Host bridge: Intel Corp.: Unknown device 3580 (rev 02)
00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02)
00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02)
00:02.0 VGA compatible controller: Intel Corp.: Unknown device 3582 (rev 02)
00:02.1 Display controller: Intel Corp.: Unknown device 3582 (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 03)
00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (rev 03)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 03)
02:01.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:04.0 Network controller: Intel Corp.: Unknown device 4220 (rev 05)
root@ttyp1[knoppix]# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04b4:0001 Cypress Semiconductor Corp. Mouse
Bus 001 Device 001: ID 0000:0000
root@ttyp1[knoppix]# dmesg
Linux version 2.4.20-xfs (root@Knoppix) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 SMP Mit Mär 26 15:37:36 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
478MB LOWMEM available.
On node 0 totalpages: 122592
zone(0): 4096 pages.
zone(1): 118496 pages.
zone(2): 0 pages.
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us
apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi
hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet
BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1594.857 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3185.04 BogoMIPS
Memory: 481868k/490368k available (1270k kernel code, 8112k reserved,
503k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000
CPU: Common caps: afe9fbbf 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000
CPU: Common caps: afe9fbbf 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
per-CPU timeslice cutoff: 0.00 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1594.7715 MHz.
..... host bus clock speed is 99.6732 MHz.
cpu: 0, clocks: 996732, slice: 498366
CPU0<T0:996720,T1:498352,D:2,S:498366,C:996732>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd789, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX [8086/24cc] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe8000000, mapped to 0xde80d000, size 32576k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24ca
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Assigned IRQ 6 for device 00:1f.1
PCI_IDE: BIOS setup was incomplete.
PCI_IDE: chipset revision 3
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4025GAS, ATA DISK drive
hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78140160 sectors (40008 MB), CHS=4864/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MATSHITA Model: UJDA760 DVD/CDRW Rev: 1.51
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 464k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 28868 blocks, 65536 bytes/block,
largest block is 65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS not found.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 02:01.0
Yenta IRQ list 0ab8, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 6 for device 00:1d.0
PCI: Sharing IRQ 6 with 00:02.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 6
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 6 for device 00:1d.1
PCI: Sharing IRQ 6 with 02:02.0
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 6
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
hub.c: new USB device 00:1d.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4b4/0x1) is not claimed by any active driver.
usb.c: registered new driver usb_mouse
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
PCI: Found IRQ 10 for device 00:1f.6
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.5
PCI: Sharing IRQ 10 with 02:04.0
input0: 4D Mouse USB Mouse on usb2:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
i810_rng: cannot disable RNG, aborting
i810_rng hardware driver 0.9.8 loaded
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 6 for device 02:02.0
PCI: Sharing IRQ 6 with 00:1d.1
eth0: RealTek RTL8139 Fast Ethernet at 0xe083f000, 00:c0:9f:8b:f7:a2, IRQ 6
eth0: Identified 8139 chip type 'RTL-8139C'
Intel 810 + AC97 Audio, version 0.21, 15:49:30 Mar 26 2003
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x1880 and 0x1c00, IRQ 10
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Modem codec, id: CXT48(Unknown)
i810_audio: codec 0 is a softmodem - skipping.
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(recovery.c, 254): journal_recover: JBD: recovery, exit status 0,
recovered transactions 2250 to 2345
(recovery.c, 256): journal_recover: JBD: Replayed 706 and revoked 17/20 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 618460k swap-space (priority -1)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
apm: BIOS not found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 408M
agpgart: no supported devices found.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
apm: BIOS not found.
root@ttyp1[knoppix]#
On 7/7/05, hamza hamzaoğlu <sendirom@gmail.com> wrote:
> Herkese selam,
> Debian sarge 2 dvd stable sürümden kurlumu başlattım ve bitirdim.
> temel kurulumu yaptıktan sonra ilk açılışta aldığım ilk hata mesajı bu:
>
> /etc/rcS.d/S36discover: line 204: 1448 Segmentation fault modprobe $MODULE
> loading uhci-hcd module
> <6>usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v2.2
>
> Debiana hoşgeldinize ulaşabilmek için grub parametrelerini editleyerek
> /probe/usb=false dedim ve bu hatayı geçtim.
>
> Ardından da şu hata mesajını aldım:
> Running 0dns-down to make sure resolv.conf is ok... done
> Setting up networking... done
> Starting hotplug subsystem
> pci
> <6>Linux agpgart interface v0.100 (c) Dave Jones
>
> burada durdu kaldı.
>
> Bu listede aynı laptopun pil durumu ile ilgili bir tartışma gördüm.
> Milli Eğt. Bak. toshiba laptop için bir sarge kurulum belgesi
> hazırlayan ya da buradan yardım etmek isteyen varsa bilsin ki yardım
> bekleyen bisürü insan var debian dünyasına dalmak isteyen. Yardımlar
> için,
>
> Şimdiden teşekkürler..
>
Reply to: