Merhaba,Aldigim yeni bilgisayarda bir ati Radeon 9550 ekran karti var fakat ben ne yaptiysam bir turlu openGL i calistiramadim. Yani webcam tv karti, scanner bluetooth falan filan bir ton oyuncak aksesuar sorunsuz calisirken Ati suruculerinde sorun yasiyorum ne yazik ki....
Kullandigim sistem debian-testing. ve Kendi derledigim bir kernel-2.6.12 kullaniyorum su anda.
Sirayla yaptigim islemleri ve aldigim hatalari anlatayim oncelikle.Ilk basta apt-get install linux-image-2.6.12-1-686 komutuyla ontanimli debian kernelini kurdum daha sonra ati'nin sitesinden ati suruculerini indirdim ve bilindigi gibi kurulumu yaptim. ./ati-driver..... seklinde. Daha sonra fglrxconfig komutuyla xorg.conf dosyami ayarladim bilgisayari yeniden baslattigimda fglrxinfo ciktisinda Mesa GLX indirect yazisini goruyordum.Acaba conf dosyasinda mi bir sorun var diye dusundum ve fglrxconfig ile yarattigim dosyayi silip dpkg-reconfigure xserver-xorg komutuyla yeni bir conf yarattim yine deisen bir sey olmadi. Bende bunun uzerine driverlari sildim ve http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html adresinde anlatildigi seklinde debian usulu ile suruculeri yukledim. Sonuc yine ayni. Bu adreste anlatilan butun yontemler ile kurulumu yapmayi denedim fakat degisen hic bir sey olmadi. Sorun acaba kernelden mi kaynaklaniyor diye 2.6.8 kernelini kurup bununla kurulumu gerceklestirmeyi denedim. Yine sonuc ayni. Daha sonra Xorg.log dosyasini incelemeye basladim ve gordum ki soyle bir sorun gozukuyor.
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV" (EE) fglrx(0): cannot init AGP (II) fglrx(0): [drm] removed 1 reserved context for kernel (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe0d41000 at 0xb7b7e000 (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* *Burda yazan cekirdek modulunun kotu olmasi bana bir gcc uyumsuzlugunu aklima getirdi ve bende 2.6.12 kernelini make-kpkg kullanmadan bilindik yontemle bilgisayarimdaki yuklu gcc ile tekrardan derledim. Ayni sekilde gene butun bildigim yontemleri bu kernel uzerinde de denedim. ne yazik ki hep bu ciktiyi aliyorum. AGP error hatasina dayanarak Xorg.conf dosyamin Device sekmesinde Option "useinternal AGP" secenegini yes ve no yaparak denedim gene deisen herhangi bir sey olmadi. Acaba kernel deki agp moduluyle atinin agp modulu cakismami yaratiyor acaba diye dusunup kernelden agp destegini kaldirip denedim gene bir deisiklik olmadi ne yazik ki... Google da bu hata msg ini arattim ve buldugum butun yontemleri denedim fakat hic bir sonuc deisikligi olmadi. Hep ayni hata :((( Bir kisi once debian yontemiyle deb paketlerini kurdum daha sonra resmi ati suruculerini yukledim duzeldi demis onu denedim. Sonuc ayni... Gerisi de yukarida denediklerimin hepsiyle ayni. Fakat bir kisi Hex le acip reverse engineering yaptim 0454 u 0450 olarak deistirdim duzeldi demis. Fakat surucunun icinde en az 100 tane 0454 var bende hepsini deistirdim bu sefer driver parcalama arizasi verdi :) Bunu soyleyen kisiye mail attim fakat bir cevap alabilmis deilim henuz.
Simdi sorun Nerde olabilir sizce?Biraz uzun bir mail oldu fakat gerekebilecek her turlu bilgiyi vermek istedim.
Asagida da gereken log dosyalari ve dmesg gibi ciktilari veriyorum. Xorg.log.0 ve kernel-config ektedir Yardimlariniz icin simdiden tesekkurler... $ lsmod |grep fglrx fglrx 251712 0 agpgart 27976 2 via_agp,fglrx $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.2.1) root@debian:/home/emre# dpkg -l xserver-xorg Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description +++-==============-==============-============================================ ii xserver-xorg 6.8.2.dfsg.1-7 the X.Org X server root@debian:/home/emre# dpkg -l x-window-system Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description +++-==============-==============-============================================ ii x-window-syste 6.8.2.dfsg.1-7 X Window System root@debian:/home/emre# cat /etc/X11/xorg.conf # xorg.conf.dpkg-new (Xorg X Window System server configuration file) ## This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database. # # Edit this file with caution, and see the xorg.conf.dpkg-new manual page. # (Type "man xorg.conf.dpkg-new" at the shell prompt.) ## This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg # package. ## If you have edited this file but would like it to be automatically updated
# again, run the following commands as root: # # cp /etc/X11/xorg.conf.dpkg-new /etc/X11/xorg.conf.dpkg-new.custom# md5sum /etc/X11/xorg.conf.dpkg-new
/var/lib/xfree86/xorg.conf.dpkg-new.md5sum
# dpkg-reconfigure xserver-xorg Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" SubSection "extmod" Option "omit xorg-dga" EndSubSection Load "freetype" Load "glx" Load "int10" Load "record" Load "type1" Load "v4l" Load "vbe" Load "GLcore" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "false" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "ATI Technologies, Inc. RV350 AS [Radeon 9600 AS]" Driver "fglrx" # BusID "PCI:1:0:0" Option "UseInternalAGPGART" "yes" # Option "VideoOverlay" "on" # Option "OpenGLOverlay" "off" EndSection Section "Monitor" Identifier "Samsung SyncMaster 757MB" Option "DPMS" HorizSync 38-90 VertRefresh 70-160 EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. RV350 AS [Radeon 9600 AS]" Monitor "Samsung SyncMaster 757MB" DefaultDepth 24 SubSection "Display" Depth 1Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display" Depth 4Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display" Depth 8Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display" Depth 15Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display" Depth 16Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection SubSection "Display" Depth 24Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection root@debian:/home/emre# dmesgLinux version 2.6.12 (root@debian) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 Sun Nov 6 17:44:25 EET 2005
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 130992 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126896 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000faa60 ACPI: RSDT (v001 A M I OEMRSDT 0x06000503 MSFT 0x00000097) @ 0x1ffb0000 ACPI: FADT (v002 A M I OEMFACP 0x06000503 MSFT 0x00000097) @ 0x1ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x06000503 MSFT 0x00000097) @ 0x1ffb0390 ACPI: OEMB (v001 A M I AMI_OEM 0x06000503 MSFT 0x00000097) @ 0x1ffc0040 ACPI: DSDT (v001 75V80 75V80000 0x00000000 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro vga=791 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2668.740 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 515536k/523968k available (1741k kernel code, 7872k reserved, 791k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5259.26 BogoMIPS (lpj=2629632) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024KCPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000651d 00000000 00000000
Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
audit: initializing netlink socket (disabled) audit(1131705839.454:0): initialized devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic APIvesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:582d vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device ACPI: Power Button (FF) [PWRF] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HDS728080PLAT20, ATA DISK drive hdb: ST3120022A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorp CDW/DVD TS-H492C, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiBhda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > hdb: max request size: 1024KiBhdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported /dev/ide/host0/bus0/target1/lun0: p1 pd: pd version 1.05, major 45, cluster 64, nice 0 pda: Autoprobe failed pd: no valid drive found pf: pf version 1.04, major 47, cluster 64, nice 0 pf: No ATAPI disk detected pg: pg version 1.02, major 97 pga: Autoprobe failed pg: No ATAPI device detected mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) input: AT Translated Set 2 keyboard on isa0060/serio0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 180k freed NET: Registered protocol family 1 Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS on hda1, internal journal hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Linux agpgart interface v0.101 (c) Dave Jonesfglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 [fglrx] module loaded - fglrx 8.18.8 [Oct 25 2005] on minor 0 Generic RTC Driver v1.07 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185 PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9 eth0: VIA Rhine II at 0x1e800, 00:13:8f:26:74:95, IRQ 185. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. SCSI subsystem initialized libata version 1.11 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 PCI: Via IRQ fixup for 0000:00:0f.0, from 5 to 9 sata_via(0000:00:0f.0): routed to hard irq line 9 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 169 ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 169 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 193, io base 0x0000d800 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 193, io base 0x0000dc00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 193, io base 0x0000e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 193, io base 0x0000ec00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver hiddev Linux video capture interface: v1.00hiddev96: USB HID v1.10 Device [Samsung Electronics Sam Sung Electronics] on usb-0000:00:10.2-2
usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver/usr/src/modules/spca5xx/drivers/usb/spca5xx.c: USB SPCA5XX camera found.Logitech QuickCam Express II(SPCA561A) /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_probe:8764] Camera type S561 /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_getcapability:2528] maxw 352 maxh 288 minw 160 minh 120
usbcore: registered new driver spca5xx/usr/src/modules/spca5xx/drivers/usb/spca5xx.c: spca5xx driver 00.57.03 registered
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 193, io mem 0xff6ff800 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 usb 2-2: USB disconnect, address 2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3/usr/src/modules/spca5xx/drivers/usb/spca5xx.c: USB SPCA5XX camera found.Logitech QuickCam Express II(SPCA561A) /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_probe:8764] Camera type S561 /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_getcapability:2528] maxw 352 maxh 288 minw 160 minh 120
usb 3-2: new low speed USB device using uhci_hcd and address 3hiddev96: USB HID v1.10 Device [Samsung Electronics Sam Sung Electronics] on usb-0000:00:10.2-2
via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: PC Speaker Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077/usr/src/modules/spca5xx/drivers/usb/spca561.h: [spca561_init:465] Find spca561 USB Product ID 928
Fire GL built-in AGP-support Based on agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439Magpgart: Unsupported Via chipset (device id: 0314), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found. [fglrx:firegl_unlock] *ERROR* Process 3797 using kernel context 0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 17
Attachment:
config-2.6.12.gz
Description: GNU Zip compressed data
Attachment:
Xorg.0.log.gz
Description: GNU Zip compressed data