Merhaba,
Sistemi asagidaki gibi özelliklere, modüllere ve mount noktalarina
sahip bir Debian unstable
debian:/home/fz# uname -a
Linux debian 2.4.18 #1 Mon Mar 24 02:00:40 EET 2003 i686 GNU/Linux
debian:/home/fz# lsmod
Module Size Used by Tainted: P
usb-storage 97216 1
uhci 23720 0 (unused)
usbcore 48448 1 [usb-storage uhci]
parport_pc 25704 0
parport 22880 0 [parport_pc]
agpgart 29792 3 (autoclean)
nls_cp437 4384 1 (autoclean)
ntfs 48544 1 (autoclean)
ide-scsi 7328 0
sg 23556 0 (unused)
apm 9084 0
NVdriver 1065280 10
via82cxxx_audio 17792 2
soundcore 3428 2 [via82cxxx_audio]
ac97_codec 9568 0 [via82cxxx_audio]
ac97 2960 0 (unused)
keybdev 1664 0 (unused)
input 3232 0 [keybdev]
debian:/home/fz# mount
/dev/hda2 on / type ext2 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda1 on /NTFS type ntfs (rw)
/dev/hda5 on /mnt/hda5 type ext3 (rw,noexec,nosuid,nodev,errors=remount-ro)
usbdevfs on /proc/bus/usb type usbdevfs (rw)
USB hafiza cubugu ile ilgili garip deneyimlerim var. $öyle ki
su anda elimde bulunan hafiza cubugunu daha önce en az
birkac kez Debian'a taktiktan sonra görebildigimi hatirliyorum.
dmesg ciktisinda aletin markasini modelini filan da görebiliyordum.
Aa, ne güzel sorunsuz calisti demis, sasirmistim!
Ayni aleti birkac ay sonra yani bugünlerde tekrar denedigimde ise
sorun yasiyorum. Daha önceki denememde hic hotplug filan
kurulu olmadigi halde aleti takmis, mount edebilmistim ve icinde
gezinmistim.
Simdi ayni sekilde yapmaya calistigimda olmuyor:
debian:/home/fz# mount -t vfat /dev/sda1 /mnt/usbdrive/
mount: /dev/sda1 is not a valid block device
hotplug paketini kurduktan sonra
debian:/home/fz# /etc/init.d/hotplug start
Starting hotplug subsystem:
input
input [failed]
isapnp
isapnp [success]
net
net [success]
pci
rivafb: ignore video modules: rivafb
via82cxxx_audio: already loaded
usb-uhci: blacklisted
uhci: loaded successfully
parport_pc: already loaded
pci [success]
usb
usbcore: already loaded
usbcore: already loaded
usbcore: already loaded
usbcore: already loaded
usb [success]
done
Yine mount islemini deniyorum, gene olmuyor. Hafiza cubugunu cikarip
takiyorum ve yine deniyorum bu sefer mount islemi komut satirina
döndürmeden takilip kaliyor, öylece bekliyor, baska bir pencere acip
kill -9 ile bile islemi sonlandiramiyorum. (Su anda bu sekilde ps
ciktisinda görünen iki mount komutu var ve bunlara hicbir sey
yapamiyorum).
Aleti baska bir makinada MS Windows 2000 üzerinde denedigimde
düzgün olarak algilandigini görüyorum ve icindeki dosyalara
erisebiliyorum.
1- AskIda kalan mount süreclerini sonlandirmak icin ne önerirsiniz?
2- Elimdeki saglam oldugunu bildigim ve garip sekilde daha önce
en az bir kez calistigini gördügüm ama ondan sonra bir türlü
makina acikken calistiramadigim USB hafiza cubugumu sorunsuz olarak
mount edebilmem icin ne önerirsiniz?
3- USB hafiza cubugu takili iken bilgisayari kapatsam ve sonra
tekrar acsam büyük ihtimalle USB hafiza cubunu görecek (daha önce
bu tür deneyimlerim oldu ayni sistemde) ancak tabii bu pek cözüm
sayilmaz takdir edersiniz ki.
"dmesg | grep usb" komutunun ciktisi:
usb-uhci.c: interrupt, status 2, frame# 651
usb.c: USB device not responding, giving up (error=-84)
usb.c: USB device not accepting new address=11 (error=-110)
usb-uhci.c: interrupt, status 2, frame# 1269
usb.c: USB device not responding, giving up (error=-84)
usb.c: USB device not accepting new address=13 (error=-110)
usb.c: USB disconnect on device 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 1
usb.c: USB bus 2 deregistered
usb-storage: usb_stor_exit() called
usb-storage: -- calling usb_deregister()
usb.c: deregistering driver usb-storage
usb-storage: -- calling scsi_unregister_module()
usb-storage: release() called for host usb-storage
usb-storage: -- sending US_ACT_EXIT command to thread
usb-storage: *** thread awakened.
usb-storage: -- US_ACT_EXIT command received
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: new USB bus registered, assigned bus number 1
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB device not accepting new address=2 (error=-110)
usb.c: USB device not accepting new address=3 (error=-110)
usb.c: USB disconnect on device 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: new USB bus registered, assigned bus number 1
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB device not accepting new address=2 (error=-110)
usb.c: USB device not accepting new address=3 (error=-110)
usb.c: USB device 4 (vend/prod 0xea0/0x2168) is not claimed by any active driver.
usb.c: registered new driver usb-storage
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 81
usb-storage: Array length appears to be: 83
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc185c9a0 Out: 0xc185c9b4 Int: 0xc185c9c8 (Period 1)
usb-storage: New GUID 0ea02168106c1140f4e05542
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 a5 32 1c c0
usb-storage: Bulk command S 0x43425355 T 0x14 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x14 R 219 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0/1)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1d Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1d R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x1d Trg 0 LUN 0 L 18 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1d R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
usb-storage: Unit Attention: not ready to ready transition
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1e Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1e R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x1e Trg 0 LUN 0 L 18 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1e R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
usb-storage: Unit Attention: not ready to ready transition
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1f Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1f R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x20 Trg 0 LUN 0 L 8 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x20 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x21 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x21 R 251 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sda:<7>usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x22 Trg 0 LUN 0 L 4096 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x22 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1f R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x20 Trg 0 LUN 0 L 8 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x20 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x21 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x21 R 251 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sda:<7>usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x22 Trg 0 LUN 0 L 4096 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x22 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command START_STOP (6 bytes)
usb-storage: 1b 00 00 00 01 00 00 40 07 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x23 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x23 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00 ff ff a8 50 13 c0
usb-storage: Bulk command S 0x43425355 T 0x24 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x24 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x24 Trg 0 LUN 0 L 18 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x24 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: invalid field in CDB
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command START_STOP (6 bytes)
usb-storage: 1b 00 00 00 01 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x25 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x25 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 2e 61 69 64 00 00 01 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x26 Trg 0 LUN 0 L 512 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 512 bytes
usb-storage: command_abort() called
usb-storage: usb_stor_bulk_msg() returned -104 xferred 0/512
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = -22
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb.c: USB disconnect on device 4
usb-storage: storage_disconnect() called
usb-storage: -- releasing main URB
usb-storage: -- usb_unlink_urb() returned 0
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 81
usb-storage: Array length appears to be: 83
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd4fd8a20 Out: 0xd4fd8a34 Int: 0xd4fd8a48 (Period 1)
usb-storage: Found existing GUID 0ea02168106c1140f4e05542
usb.c: USB disconnect on device 5
usb-storage: storage_disconnect() called
usb-storage: -- releasing main URB
usb-storage: -- usb_unlink_urb() returned -19
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 81
usb-storage: Array length appears to be: 83
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd4fd8a20 Out: 0xd4fd8a34 Int: 0xd4fd8a48 (Period 1)
usb-storage: Found existing GUID 0ea02168106c1140f4e05542