Re: Disk boot failure
Pigeon <email@example.com> writes:
> On Sun, 10 Nov 2002 09:35:27 +0100, Martin Juhlin
> <firstname.lastname@example.org> wrote:
> >* Normally (at least on my floppy) don't know if inserted the cable
> >upside-down in the connection on the motherboard or in the floppy drive. Just
> >try to flip one-by-one and see if any of the four combination work.
> On most machines, if the cable is upside-down, the floppy LED is
> always on and (usually) the motor running.
And worse, it usually destroys any disks inserted.