[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Extraño error en la mysql



On Wed, 25 Feb 2015 14:06:15 -0300
Felix Perez <felix.listadebian@gmail.com> wrote:

El resultado del disco duro

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HDS721616PLA320
Serial Number:    PVF904ZFTALALN
LU WWN Device Id: 5 000cca 33ae0ff92
Firmware Version: P22OABGA
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Wed Feb 25 19:26:38 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 241)	Self-test routine in progress...
					10% of test remaining.
Total time to complete Offline 
data collection: 		( 2865) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   086   086   016    Pre-fail  Always       -       4194387
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   125   125   024    Pre-fail  Always       -       160 (Average 160)
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       4794
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       21
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   020    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   094   094   000    Old_age   Always       -       45309
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       4790
192 Power-Off_Retract_Count 0x0032   095   095   000    Old_age   Always       -       6533
193 Load_Cycle_Count        0x0012   095   095   000    Old_age   Always       -       6533
194 Temperature_Celsius     0x0002   157   157   000    Old_age   Always       -       38 (Min/Max 9/52)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       21
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       135

SMART Error Log Version: 1
Warning: ATA error count 25 inconsistent with error log pointer 3

ATA Error Count: 25 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 25 occurred at disk power-on lifetime: 45287 hours (1886 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 00  Error: ICRC, ABRT at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 20 a4 ba 41 ff      04:18:15.100  WRITE FPDMA QUEUED
  61 08 b8 d8 8a 48 40 08      04:18:15.100  WRITE FPDMA QUEUED
  61 10 b0 80 8a 48 40 08      04:18:15.100  WRITE FPDMA QUEUED
  61 08 a8 88 52 cc 40 08      04:18:15.100  WRITE FPDMA QUEUED
  61 08 a0 18 a4 ba 40 08      04:18:15.100  WRITE FPDMA QUEUED

Error 24 occurred at disk power-on lifetime: 45285 hours (1886 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 00  Error: ICRC, ABRT at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 80 30 f0 72 81 44 ff      02:44:11.000  WRITE FPDMA QUEUED
  61 80 68 a0 70 81 40 08      02:44:10.200  WRITE FPDMA QUEUED
  61 00 60 a0 6c 81 40 08      02:44:10.000  WRITE FPDMA QUEUED
  61 a0 58 90 35 84 40 08      02:44:09.400  WRITE FPDMA QUEUED
  61 00 50 90 31 84 40 08      02:44:09.400  WRITE FPDMA QUEUED

Error 23 occurred at disk power-on lifetime: 45285 hours (1886 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 00  Error: ICRC, ABRT at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 e0 c0 f9 c6 82 44 ff      02:43:54.600  WRITE FPDMA QUEUED
  61 e0 78 00 d9 82 40 08      02:43:54.600  WRITE FPDMA QUEUED
  61 60 70 98 d8 82 40 08      02:43:54.600  WRITE FPDMA QUEUED
  61 e0 68 f8 cf 82 40 08      02:43:54.600  WRITE FPDMA QUEUED
  61 00 60 f8 cb 82 40 08      02:43:54.600  WRITE FPDMA QUEUED

Error 22 occurred at disk power-on lifetime: 45189 hours (1882 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 00  Error: ICRC, ABRT at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 a0 3f b8 41 ff   1d+18:46:29.100  WRITE FPDMA QUEUED
  61 08 20 08 3a be 40 08   1d+18:46:29.100  WRITE FPDMA QUEUED
  61 08 18 88 88 bd 40 08   1d+18:46:29.100  WRITE FPDMA QUEUED
  61 10 10 80 8a 1e 40 08   1d+18:46:29.100  WRITE FPDMA QUEUED
  61 08 08 90 45 1e 40 08   1d+18:46:29.100  WRITE FPDMA QUEUED

Error 21 occurred at disk power-on lifetime: 45176 hours (1882 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 00  Error: ICRC, ABRT at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 20 00 60 05 c9 41 ff   1d+06:01:42.700  WRITE FPDMA QUEUED
  61 20 d0 48 ab db 40 08   1d+06:01:42.700  WRITE FPDMA QUEUED
  61 20 c8 40 05 c9 40 08   1d+06:01:42.700  WRITE FPDMA QUEUED
  61 20 c0 b0 53 9e 40 08   1d+06:01:42.700  WRITE FPDMA QUEUED
  61 20 b8 90 45 9e 40 08   1d+06:01:42.700  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     44549         -
# 2  Extended offline    Interrupted (host reset)      90%     44548         -
# 3  Short offline       Completed without error       00%     44548         -
# 4  Short offline       Completed without error       00%     39672         -
# 5  Short offline       Completed without error       00%     19768         -
# 6  Extended offline    Aborted by host               60%     10947         -
# 7  Short offline       Completed without error       00%     10896         -
# 8  Short offline       Completed without error       00%     10838         -
# 9  Short offline       Completed without error       00%     10838         -
#10  Short offline       Completed without error       00%     10838         -
#11  Short offline       Completed without error       00%     10838         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



Segun entiendo es usable.



-- 
Servicios:. http://mamalibre.com.ar/plus
MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina

Attachment: pgpVbax7AxOMB.pgp
Description: PGP signature


Reply to: