Re: Conectar Blackberry táctil a PC
----- Original Message -----
From: "Camaleón" <noelamac@gmail.com>
To: <debian-user-spanish@lists.debian.org>
Sent: Friday, April 13, 2012 11:22 AM
Subject: Re: Conectar Blackberry táctil a PC
Conecto un teléfono celular blackberry táctil a mi PC y no lo ve.
Necesitará gafas >:-)
No aun no.
Alguien me podría explicar como logro conectarlo?
Uniendo cada extremo del cable al dispositivo correspondiente: extremo1
al PC y extremo2 a la perlita.
Te caiste de la mata como se dice aquí
Según esta¹ página, para acceder a los datos de la memoria interna y
externa no necesitarías nada especial por lo que seguramente sólo
tengas que configurar el teléfono para que la tarjeta use el modo de
almacenamiento extraíble.
¹http://wiki.debian.org/BlackBerry
Tampoco leiste que no tengo acceso a Internet.
Saludos,
Camaleón
Pues te pongo lo que me sacó dmseg que es bastante y ni se que diablo es:
Parece que me cortó algo al principio.
[ 0.742023] registered taskstats version 1
[ 0.742286] rtc_cmos 00:03: setting system clock to 2012-04-13 12:12:16
UTC (1334319136)
[ 0.742320] Initalizing network drop monitor service
[ 0.742334] Freeing unused kernel memory: 380k freed
[ 0.742439] Write protecting the kernel text: 2508k
[ 0.742454] Write protecting the kernel read-only data: 920k
[ 0.752423] udev[56]: starting version 164
[ 0.767868] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.804430] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 0.804432] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 0.804464] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.804472] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.804539] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 0.821764] usbcore: registered new interface driver usbfs
[ 0.821856] usbcore: registered new interface driver hub
[ 0.821952] usbcore: registered new device driver usb
[ 0.831642] SCSI subsystem initialized
[ 0.844597] libata version 3.00 loaded.
[ 0.845186] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
[ 0.845212] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 0.847059] scsi0 : pata_jmicron
[ 0.847132] scsi1 : pata_jmicron
[ 0.847529] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000
irq 18
[ 0.847531] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008
irq 18
[ 0.848264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.849126] firewire_ohci 0000:04:05.0: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
[ 0.920119] firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI
version 1.0
[ 1.158168] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:52:18:dc
[ 1.158170] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network
Connection
[ 1.158189] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[ 1.158200] ata_piix 0000:00:1f.2: version 2.13
[ 1.158210] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 1.158213] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.316021] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.316068] scsi2 : ata_piix
[ 1.316118] scsi3 : ata_piix
[ 1.316661] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2410 irq
14
[ 1.316665] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2418 irq
15
[ 1.316687] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.316696] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.316699] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.316712] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.316733] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.320628] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.320632] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0325400
[ 1.340007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.340026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.340029] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.340032] usb usb1: Product: EHCI Host Controller
[ 1.340034] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.340036] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.340107] usb usb1: configuration #1 chosen from 1 choice
[ 1.340136] hub 1-0:1.0: USB hub found
[ 1.340142] hub 1-0:1.0: 4 ports detected
[ 1.340192] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 1.340195] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.340221] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.340249] scsi4 : ata_piix
[ 1.340284] scsi5 : ata_piix
[ 1.340813] ata5: SATA max UDMA/133 cmd 0x2428 ctl 0x244c bmdma 0x20f0
irq 19
[ 1.340816] ata6: SATA max UDMA/133 cmd 0x2420 ctl 0x2448 bmdma 0x20f8
irq 19
[ 1.340844] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.340852] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.340855] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.340860] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.340880] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.344768] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.344777] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0325000
[ 1.360008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.360022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.360025] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.360028] usb usb2: Product: EHCI Host Controller
[ 1.360030] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.360032] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.360088] usb usb2: configuration #1 chosen from 1 choice
[ 1.360116] hub 2-0:1.0: USB hub found
[ 1.360122] hub 2-0:1.0: 6 ports detected
[ 1.424048] firewire_core: created device fw0: GUID 00902700021a2216,
S400
[ 1.433230] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.433245] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1.433249] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.433252] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.433262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.433285] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0
[ 1.433306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.433308] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.433309] usb usb3: Product: UHCI Host Controller
[ 1.433311] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.433312] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.433351] usb usb3: configuration #1 chosen from 1 choice
[ 1.433369] hub 3-0:1.0: USB hub found
[ 1.433373] hub 3-0:1.0: 2 ports detected
[ 1.433406] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 1.433411] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.433413] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.433418] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.433442] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080
[ 1.433462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.433464] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.433465] usb usb4: Product: UHCI Host Controller
[ 1.433467] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.433468] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.433508] usb usb4: configuration #1 chosen from 1 choice
[ 1.433525] hub 4-0:1.0: USB hub found
[ 1.433529] hub 4-0:1.0: 2 ports detected
[ 1.433561] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.433565] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.433567] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.433571] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 1.433589] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
[ 1.433610] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.433611] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.433613] usb usb5: Product: UHCI Host Controller
[ 1.433614] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.433616] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.433652] usb usb5: configuration #1 chosen from 1 choice
[ 1.433669] hub 5-0:1.0: USB hub found
[ 1.433672] hub 5-0:1.0: 2 ports detected
[ 1.433700] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.433705] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.433707] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.433711] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 1.433730] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
[ 1.433750] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.433752] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.433754] usb usb6: Product: UHCI Host Controller
[ 1.433755] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.433757] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.433796] usb usb6: configuration #1 chosen from 1 choice
[ 1.433813] hub 6-0:1.0: USB hub found
[ 1.433817] hub 6-0:1.0: 2 ports detected
[ 1.433847] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.433851] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.433853] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.433857] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 1.433875] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
[ 1.433895] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.433897] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.433898] usb usb7: Product: UHCI Host Controller
[ 1.433900] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.433901] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.433943] usb usb7: configuration #1 chosen from 1 choice
[ 1.433960] hub 7-0:1.0: USB hub found
[ 1.433964] hub 7-0:1.0: 2 ports detected
[ 1.674498] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.828042] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.840173] ata5.00: ATAPI: ATAPI iHAS324 B, AL19, max UDMA/100
[ 1.856193] ata5.00: configured for UDMA/100
[ 1.966509] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.966520] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 2.112052] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.112063] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 2.161864] ata3.00: ATA-7: ST3250624AS, 3.AAH, max UDMA/133
[ 2.161867] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.228513] ata3.00: configured for UDMA/133
[ 2.228604] scsi 2:0:0:0: Direct-Access ATA ST3250624AS
3.AA PQ: 0 ANSI: 5
[ 2.232206] scsi 4:0:0:0: CD-ROM ATAPI iHAS324 B
AL19 PQ: 0 ANSI: 5
[ 2.239527] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[ 2.239560] sd 2:0:0:0: [sda] Write Protect is off
[ 2.239562] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.239576] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.239719] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.245686] Uniform CD-ROM driver Revision: 3.20
[ 2.245759] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.268168] sda1 < sda5 sda6 sda7 > sda4
[ 2.309869] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.313150] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.313435] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.872212] PM: Starting manual resume from disk
[ 2.872214] PM: Resume from partition 8:7
[ 2.872216] PM: Checking hibernation image.
[ 2.872376] PM: Error -22 checking image file
[ 2.872378] PM: Resume from disk failed.
[ 2.906394] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 4.081759] udev[359]: starting version 164
[ 4.604879] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.630175] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.630207] ACPI: Sleep Button [SLPB]
[ 4.630256] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.630273] ACPI: Power Button [PWRF]
[ 4.633119] processor LNXCPU:00: registered as cooling_device0
[ 4.633290] processor LNXCPU:01: registered as cooling_device1
[ 5.071636] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[ 5.285336] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 5.410274] [drm] Initialized drm 1.1.0 20060810
[ 5.458705] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 5.458728] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.820613] hda_codec: ALC1200: BIOS auto-probing.
[ 5.821935] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.824717] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.824720] i915 0000:00:02.0: setting latency timer to 64
[ 5.829428] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 5.829433] [drm] set up 7M of stolen space
[ 6.159700] [drm] initialized overlay support
[ 6.420360] Console: switching to colour frame buffer device 180x56
[ 6.424325] fb0: inteldrmfb frame buffer device
[ 6.424326] registered panic notifier
[ 6.424342] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 6.774577] Adding 2586424k swap on /dev/sda7. Priority:-1 extents:1
across:2586424k
[ 7.152915] loop: module loaded
[ 7.764383] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 7.786651] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 8.396259] fuse init (API version 7.13)
[ 8.656143] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 8.712035] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 8.712252] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.661467] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: Rx
[ 11.661615] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.176003] eth0: no IPv6 routers present
[ 32.728725] Bluetooth: Core ver 2.15
[ 32.728748] NET: Registered protocol family 31
[ 32.728749] Bluetooth: HCI device and connection manager initialized
[ 32.728751] Bluetooth: HCI socket layer initialized
[ 32.826677] Bluetooth: L2CAP ver 2.14
[ 32.826679] Bluetooth: L2CAP socket layer initialized
[ 33.086799] lp: driver loaded but no devices found
[ 33.118529] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.118530] Bluetooth: BNEP filters: protocol multicast
[ 33.135872] Bridge firewalling registered
[ 33.199138] ppdev: user-space parallel port driver
[ 33.444168] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.444170] Bluetooth: SCO socket layer initialized
[ 36.816528] vboxdrv: Found 2 processor cores.
[ 36.816640] vboxdrv: fAsync=0 offMin=0x1d4 offMax=0x1521
[ 36.816965] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 36.816967] vboxdrv: Successfully loaded version 3.2.14 (interface
0x00140001).
[ 247.500008] usb 4-2: new full speed USB device using uhci_hcd and address
2
[ 247.679040] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 247.679043] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 247.679046] usb 4-2: Product: RIM Composite Device
[ 247.679048] usb 4-2: Manufacturer: Research In Motion
[ 247.679050] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 247.679135] usb 4-2: configuration #1 chosen from 1 choice
[ 247.779113] usbcore: registered new interface driver berry_charge
[ 247.790834] Initializing USB Mass Storage driver...
[ 247.790945] scsi6 : SCSI emulation for USB Mass Storage devices
[ 247.790995] usbcore: registered new interface driver usb-storage
[ 247.790996] USB Mass Storage support registered.
[ 247.791286] usb-storage: device found at 2
[ 247.791287] usb-storage: waiting for device to settle before scanning
[ 252.789260] usb-storage: device scan complete
[ 252.792254] scsi 6:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 252.792773] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 252.802241] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 262.310302] warning: `VirtualBox' uses 32-bit capabilities (legacy
support in use)
[ 273.370029] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96
GB/3.69 GiB)
[ 273.375026] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 273.387025] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 273.387028] sdb: sdb1
[ 274.042061] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 287.832028] usb 4-2: USB disconnect, address 2
[ 292.836008] usb 4-2: new full speed USB device using uhci_hcd and address
3
[ 293.071041] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 293.071044] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 293.071047] usb 4-2: Product: RIM Composite Device
[ 293.071049] usb 4-2: Manufacturer: Research In Motion
[ 293.071051] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 293.071140] usb 4-2: configuration #1 chosen from 1 choice
[ 293.079110] scsi7 : SCSI emulation for USB Mass Storage devices
[ 293.079662] usb-storage: device found at 3
[ 293.079663] usb-storage: waiting for device to settle before scanning
[ 298.077258] usb-storage: device scan complete
[ 298.080251] scsi 7:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 298.080783] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 298.090238] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 301.370367] sd 7:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96
GB/3.69 GiB)
[ 301.375364] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 301.387363] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 301.387366] sdb: sdb1
[ 302.002404] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 463.414525] device eth0 entered promiscuous mode
[ 2400.312033] usb 4-2: USB disconnect, address 3
[ 2400.660011] usb 4-2: new full speed USB device using uhci_hcd and address
4
[ 2400.839384] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2400.839387] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2400.839389] usb 4-2: Product: RIM Composite Device
[ 2400.839390] usb 4-2: Manufacturer: Research In Motion
[ 2400.839391] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2400.839465] usb 4-2: configuration #1 chosen from 1 choice
[ 2400.847457] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2400.860525] usb-storage: device found at 4
[ 2400.860527] usb-storage: waiting for device to settle before scanning
[ 2405.861606] usb-storage: device scan complete
[ 2405.864605] scsi 8:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2405.865024] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2405.874584] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2411.472029] usb 4-2: USB disconnect, address 4
[ 2411.726315] usb 4-2: new full speed USB device using uhci_hcd and address
5
[ 2411.909805] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2411.909807] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2411.909809] usb 4-2: Product: RIM Composite Device
[ 2411.909810] usb 4-2: Manufacturer: Research In Motion
[ 2411.909812] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2411.909884] usb 4-2: configuration #1 chosen from 1 choice
[ 2411.917877] scsi9 : SCSI emulation for USB Mass Storage devices
[ 2411.917985] usb-storage: device found at 5
[ 2411.917986] usb-storage: waiting for device to settle before scanning
[ 2416.918023] usb-storage: device scan complete
[ 2416.922010] scsi 9:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2416.922642] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 2416.932018] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 2459.336032] usb 4-2: USB disconnect, address 5
[ 2459.716011] usb 4-2: new full speed USB device using uhci_hcd and address
6
[ 2459.895637] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2459.895641] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2459.895643] usb 4-2: Product: RIM Composite Device
[ 2459.895645] usb 4-2: Manufacturer: Research In Motion
[ 2459.895647] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2459.895741] usb 4-2: configuration #1 chosen from 1 choice
[ 2459.903705] scsi10 : SCSI emulation for USB Mass Storage devices
[ 2459.910904] usb-storage: device found at 6
[ 2459.910905] usb-storage: waiting for device to settle before scanning
[ 2464.544034] usb 4-2: USB disconnect, address 6
[ 2464.912010] usb 4-2: new full speed USB device using uhci_hcd and address
7
[ 2465.091836] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2465.091840] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2465.091842] usb 4-2: Product: RIM Composite Device
[ 2465.091844] usb 4-2: Manufacturer: Research In Motion
[ 2465.091846] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2465.091927] usb 4-2: configuration #1 chosen from 1 choice
[ 2465.099909] scsi11 : SCSI emulation for USB Mass Storage devices
[ 2465.100225] usb-storage: device found at 7
[ 2465.100226] usb-storage: waiting for device to settle before scanning
[ 2470.101047] usb-storage: device scan complete
[ 2470.105041] scsi 11:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2470.105661] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 2470.115035] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[ 2473.720030] usb 4-2: USB disconnect, address 7
[ 2474.100010] usb 4-2: new full speed USB device using uhci_hcd and address
8
[ 2474.279248] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2474.279251] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2474.279253] usb 4-2: Product: RIM Composite Device
[ 2474.279255] usb 4-2: Manufacturer: Research In Motion
[ 2474.279256] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2474.279371] usb 4-2: configuration #1 chosen from 1 choice
[ 2474.287258] scsi12 : SCSI emulation for USB Mass Storage devices
[ 2474.293115] usb-storage: device found at 8
[ 2474.293116] usb-storage: waiting for device to settle before scanning
[ 2479.293395] usb-storage: device scan complete
[ 2479.296388] scsi 12:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2479.297108] sd 12:0:0:0: Attached scsi generic sg2 type 0
[ 2479.306382] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 2487.856029] usb 4-2: USB disconnect, address 8
[ 2488.108497] usb 4-2: new full speed USB device using uhci_hcd and address
9
[ 2488.287720] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2488.287723] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2488.287726] usb 4-2: Product: RIM Composite Device
[ 2488.287728] usb 4-2: Manufacturer: Research In Motion
[ 2488.287730] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2488.287824] usb 4-2: configuration #1 chosen from 1 choice
[ 2488.295795] scsi13 : SCSI emulation for USB Mass Storage devices
[ 2488.306622] usb-storage: device found at 9
[ 2488.306624] usb-storage: waiting for device to settle before scanning
[ 2493.305940] usb-storage: device scan complete
[ 2493.308923] scsi 13:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2493.309386] sd 13:0:0:0: Attached scsi generic sg2 type 0
[ 2493.317917] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 2587.056535] usb 4-2: USB disconnect, address 9
[ 2587.312183] usb 4-2: new full speed USB device using uhci_hcd and address
10
[ 2587.492501] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2587.492503] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2587.492506] usb 4-2: Product: RIM Composite Device
[ 2587.492507] usb 4-2: Manufacturer: Research In Motion
[ 2587.492508] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2587.492590] usb 4-2: configuration #1 chosen from 1 choice
[ 2587.504732] scsi14 : SCSI emulation for USB Mass Storage devices
[ 2587.511635] usb-storage: device found at 10
[ 2587.511636] usb-storage: waiting for device to settle before scanning
[ 2592.509713] usb-storage: device scan complete
[ 2592.512039] scsi 14:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2592.513020] sd 14:0:0:0: Attached scsi generic sg2 type 0
[ 2592.522698] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[ 2645.832029] usb 4-2: USB disconnect, address 10
[ 2646.084504] usb 4-2: new full speed USB device using uhci_hcd and address
11
[ 2646.263743] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 2646.263747] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 2646.263750] usb 4-2: Product: RIM Composite Device
[ 2646.263752] usb 4-2: Manufacturer: Research In Motion
[ 2646.263754] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 2646.263857] usb 4-2: configuration #1 chosen from 1 choice
[ 2646.271800] scsi15 : SCSI emulation for USB Mass Storage devices
[ 2646.271894] usb-storage: device found at 11
[ 2646.271896] usb-storage: waiting for device to settle before scanning
[ 2651.269950] usb-storage: device scan complete
[ 2651.272954] scsi 15:0:0:0: Direct-Access RIM Blackberry SD
0001 PQ: 0 ANSI: 4 CCS
[ 2651.273286] sd 15:0:0:0: Attached scsi generic sg2 type 0
[ 2651.282941] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[ 2653.378018] sd 15:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96
GB/3.69 GiB)
[ 2653.383019] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[ 2653.395018] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[ 2653.395021] sdb: sdb1
[ 2654.028063] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 2674.712061] usb 2-6: new high speed USB device using ehci_hcd and address
2
[ 2674.846985] usb 2-6: New USB device found, idVendor=125f, idProduct=c93a
[ 2674.846988] usb 2-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2674.846991] usb 2-6: Product: ADATA USB Flash Drive
[ 2674.846993] usb 2-6: Manufacturer: ADATA
[ 2674.846995] usb 2-6: SerialNumber: 0000000E984BD2
[ 2674.847101] usb 2-6: configuration #1 chosen from 1 choice
[ 2674.847595] scsi16 : SCSI emulation for USB Mass Storage devices
[ 2674.847692] usb-storage: device found at 2
[ 2674.847693] usb-storage: waiting for device to settle before scanning
[ 2679.844074] usb-storage: device scan complete
[ 2679.844569] scsi 16:0:0:0: Direct-Access ADATA USB Flash Drive
0.00 PQ: 0 ANSI: 2
[ 2679.844900] sd 16:0:0:0: Attached scsi generic sg3 type 0
[ 2679.845674] sd 16:0:0:0: [sdc] 63389696 512-byte logical blocks: (32.4
GB/30.2 GiB)
[ 2679.846489] sd 16:0:0:0: [sdc] Write Protect is off
[ 2679.846491] sd 16:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 2679.846493] sd 16:0:0:0: [sdc] Assuming drive cache: write through
[ 2679.849050] sd 16:0:0:0: [sdc] Assuming drive cache: write through
[ 2679.849052] sdc: sdc1
[ 2679.856799] sd 16:0:0:0: [sdc] Assuming drive cache: write through
[ 2679.856801] sd 16:0:0:0: [sdc] Attached SCSI removable disk
[ 2681.025112] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 3114.530261] usb 2-6: USB disconnect, address 2
[ 6531.000027] usb 4-2: USB disconnect, address 11
[ 6531.342044] usb 4-2: new full speed USB device using uhci_hcd and address
12
[ 6531.525838] usb 4-2: New USB device found, idVendor=0fca, idProduct=0004
[ 6531.525840] usb 4-2: New USB device strings: Mfr=1, Product=5,
SerialNumber=3
[ 6531.525842] usb 4-2: Product: RIM Composite Device
[ 6531.525844] usb 4-2: Manufacturer: Research In Motion
[ 6531.525845] usb 4-2: SerialNumber:
050B8206EED3BA0E5A6C21CA06D16744783BB03B
[ 6531.525920] usb 4-2: configuration #1 chosen from 1 choice
[ 6531.533907] scsi17 : SCSI emulation for USB Mass Storage devices
[ 6531.534011] usb-storage: device found at 12
[ 6531.534012] usb-storage: waiting for device to settle before scanning
[ 6535.962073] usb 4-2: USB disconnect, address 12
[ 7897.820500] usb 2-6: new high speed USB device using ehci_hcd and address
3
[ 7897.953419] usb 2-6: New USB device found, idVendor=0fca, idProduct=8004
[ 7897.953422] usb 2-6: New USB device strings: Mfr=1, Product=15,
SerialNumber=13
[ 7897.953425] usb 2-6: Product: RIM Composite Device
[ 7897.953427] usb 2-6: Manufacturer: Unknown String
[ 7897.953429] usb 2-6: SerialNumber:
A4E51FEFB0C381304BC8F28024D7879C5F154FB2
[ 7897.953522] usb 2-6: configuration #1 chosen from 1 choice
[ 7897.959833] scsi18 : SCSI emulation for USB Mass Storage devices
[ 7897.960620] usb-storage: device found at 3
[ 7897.960621] usb-storage: waiting for device to settle before scanning
[ 7902.962510] usb-storage: device scan complete
[ 7902.964756] scsi 18:0:0:0: Direct-Access RIM BlackBerry SD
0003 PQ: 0 ANSI: 4 CCS
[ 7902.965376] scsi 18:0:0:1: Direct-Access RIM BlackBerry
1003 PQ: 0 ANSI: 4 CCS
[ 7902.965793] sd 18:0:0:0: Attached scsi generic sg2 type 0
[ 7902.966106] sd 18:0:0:1: Attached scsi generic sg3 type 0
[ 7902.966862] sd 18:0:0:0: [sdb] Attached SCSI removable disk
[ 7902.968173] sd 18:0:0:1: [sdc] Attached SCSI removable disk
[ 7902.985501] usb 2-6: USB disconnect, address 3
[ 7903.428014] usb 2-6: new high speed USB device using ehci_hcd and address
4
[ 7903.562258] usb 2-6: New USB device found, idVendor=0fca, idProduct=8007
[ 7903.562262] usb 2-6: New USB device strings: Mfr=1, Product=15,
SerialNumber=13
[ 7903.562264] usb 2-6: Product: RIM Composite Device
[ 7903.562266] usb 2-6: Manufacturer: Unknown String
[ 7903.562269] usb 2-6: SerialNumber:
A4E51FEFB0C381304BC8F28024D7879C5F154FB2
[ 7903.562358] usb 2-6: configuration #1 chosen from 1 choice
[ 7903.567312] scsi19 : SCSI emulation for USB Mass Storage devices
[ 7903.567411] usb-storage: device found at 4
[ 7903.567412] usb-storage: waiting for device to settle before scanning
[ 7908.564977] usb-storage: device scan complete
[ 7908.567220] scsi 19:0:0:0: Direct-Access RIM BlackBerry SD
0003 PQ: 0 ANSI: 4 CCS
[ 7908.567839] scsi 19:0:0:1: Direct-Access RIM BlackBerry
1003 PQ: 0 ANSI: 4 CCS
[ 7908.569117] sd 19:0:0:0: Attached scsi generic sg2 type 0
[ 7908.569410] sd 19:0:0:1: Attached scsi generic sg3 type 0
[ 7908.572827] sd 19:0:0:0: [sdb] Attached SCSI removable disk
[ 7908.573575] sd 19:0:0:1: [sdc] Attached SCSI removable disk
[ 7958.028012] usb 2-6: reset high speed USB device using ehci_hcd and
address 4
[ 7958.163908] scsi20 : SCSI emulation for USB Mass Storage devices
[ 7958.164493] usb-storage: device found at 4
[ 7958.164495] usb-storage: waiting for device to settle before scanning
[ 7963.165051] usb-storage: device scan complete
[ 7963.167051] scsi 20:0:0:0: Direct-Access RIM BlackBerry SD
0003 PQ: 0 ANSI: 4 CCS
[ 7963.167670] scsi 20:0:0:1: Direct-Access RIM BlackBerry
1003 PQ: 0 ANSI: 4 CCS
[ 7963.168341] sd 20:0:0:0: Attached scsi generic sg2 type 0
[ 7963.169534] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[ 7963.169592] sd 20:0:0:1: Attached scsi generic sg3 type 0
[ 7963.170780] sd 20:0:0:1: [sdc] Attached SCSI removable disk
[ 8434.752135] usb 2-6: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 192
rq 170 len 1000 ret -110
[ 8474.572154] usb 2-6: usbfs: USBDEVFS_CONTROL failed cmd shotwell rqt 192
rq 170 len 1000 ret -110
[ 8870.239499] usb 2-6: USB disconnect, address 4
[14259.376513] usb 2-6: new high speed USB device using ehci_hcd and address
5
[14259.509838] usb 2-6: New USB device found, idVendor=0fca, idProduct=8004
[14259.509842] usb 2-6: New USB device strings: Mfr=1, Product=15,
SerialNumber=13
[14259.509845] usb 2-6: Product: RIM Composite Device
[14259.509847] usb 2-6: Manufacturer: Unknown String
[14259.509849] usb 2-6: SerialNumber:
A4E51FEFB0C381304BC8F28024D7879C5F154FB2
[14259.509951] usb 2-6: configuration #1 chosen from 1 choice
[14259.513784] scsi21 : SCSI emulation for USB Mass Storage devices
[14259.513889] usb-storage: device found at 5
[14259.513890] usb-storage: waiting for device to settle before scanning
[14264.513062] usb-storage: device scan complete
[14264.515175] scsi 21:0:0:0: Direct-Access RIM BlackBerry SD
0003 PQ: 0 ANSI: 4 CCS
[14264.515793] scsi 21:0:0:1: Direct-Access RIM BlackBerry
1003 PQ: 0 ANSI: 4 CCS
[14264.516498] sd 21:0:0:0: Attached scsi generic sg2 type 0
[14264.516780] sd 21:0:0:1: Attached scsi generic sg3 type 0
[14264.519283] sd 21:0:0:0: [sdb] Attached SCSI removable disk
[14264.520766] sd 21:0:0:1: [sdc] Attached SCSI removable disk
[14264.537550] usb 2-6: USB disconnect, address 5
[14264.980017] usb 2-6: new high speed USB device using ehci_hcd and address
6
[14265.113801] usb 2-6: New USB device found, idVendor=0fca, idProduct=8007
[14265.113805] usb 2-6: New USB device strings: Mfr=1, Product=15,
SerialNumber=13
[14265.113808] usb 2-6: Product: RIM Composite Device
[14265.113810] usb 2-6: Manufacturer: Unknown String
[14265.113812] usb 2-6: SerialNumber:
A4E51FEFB0C381304BC8F28024D7879C5F154FB2
[14265.113900] usb 2-6: configuration #1 chosen from 1 choice
[14265.119247] scsi22 : SCSI emulation for USB Mass Storage devices
[14265.119359] usb-storage: device found at 6
[14265.119360] usb-storage: waiting for device to settle before scanning
[14270.117026] usb-storage: device scan complete
[14270.119138] scsi 22:0:0:0: Direct-Access RIM BlackBerry SD
0003 PQ: 0 ANSI: 4 CCS
[14270.119757] scsi 22:0:0:1: Direct-Access RIM BlackBerry
1003 PQ: 0 ANSI: 4 CCS
[14270.120853] sd 22:0:0:0: Attached scsi generic sg2 type 0
[14270.121198] sd 22:0:0:1: Attached scsi generic sg3 type 0
[14270.123617] sd 22:0:0:0: [sdb] Attached SCSI removable disk
[14270.124873] sd 22:0:0:1: [sdc] Attached SCSI removable disk
root@ueb_cgi_05:/home/idonis#
Saludos Reiterados
=========
|| ISMAEL ||
=========
Reply to: