problemas con discos duros
hola amigos aquí les dejo lo que conseguí con ayuda de ustedes lo del
log del boot,, para que me digan porque a mi me parece que mi pc se esta
queriendo comunicar conmigo como para decirme que uno o varios de sus
discos duros tiene problemas pero como no se nada de nada de eso, pues
quería primero consultarlo con ustedes para que me den su opinión y en
caso de que tenga líos, pues me dicen que tengo que usar para corregir o
reparar los errores, gracias de antemano amigos,
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13)
(waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524176) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524176
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524176
[ 0.000000] On node 0 totalpages: 524176
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292496 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FB0D0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FF90000, 0038 (r1 A_M_I_ OEMRSDT 6000706
MSFT 97)
[ 0.000000] ACPI: FACP 7FF90200, 0081 (r1 A_M_I_ OEMFACP 6000706
MSFT 97)
[ 0.000000] ACPI: DSDT 7FF90590, 5870 (r1 A0356 A0356034 34
INTL 20060113)
[ 0.000000] ACPI: FACS 7FF9E000, 0040
[ 0.000000] ACPI: APIC 7FF90390, 0080 (r1 A_M_I_ OEMAPIC 6000706
MSFT 97)
[ 0.000000] ACPI: OEMB 7FF9E040, 006B (r1 A_M_I_ AMI_OEM 6000706
MSFT 97)
[ 0.000000] ACPI: HPET 7FF95E00, 0038 (r1 A_M_I_ OEMHPET 6000706
MSFT 97)
[ 0.000000] ACPI: MCFG 7FF95E40, 003C (r1 A_M_I_ OEMMCFG 6000706
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:7ff80000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 520080
[ 0.000000] Kernel command line: root=/dev/sda5 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1600.034 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 2068036k/2096704k available (1769k kernel code,
27472k reserved, 752k data, 244k init, 1179200k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083868] Calibrating delay using timer specific routine.. 3203.01
BogoMIPS (lpj=6406036)
[ 0.083907] Security Framework initialized
[ 0.083913] SELinux: Disabled at boot.
[ 0.083917] Capability LSM initialized
[ 0.083933] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 512K
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] SMP alternatives: switching to UP code
[ 0.104006] ACPI: Core revision 20080321
[ 0.116007] ENABLING IO-APIC IRQs
[ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155669] CPU0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz
stepping 01
[ 0.156009] Brought up 1 CPUs
[ 0.156009] Total of 1 processors activated (3203.01 BogoMIPS).
[ 0.156009] CPU0 attaching sched-domain:
[ 0.156009] domain 0: span 0
[ 0.156009] groups: 0
[ 0.156009] net_namespace: 660 bytes
[ 0.156009] Booting paravirtualized kernel on bare hardware
[ 0.156009] NET: Registered protocol family 16
[ 0.156009] ACPI: bus type pci registered
[ 0.156009] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory
Controller Hub with MMCONFIG support.
[ 0.156009] PCI: Using MMCONFIG for extended config space
[ 0.156009] PCI: Using configuration type 1 for base access
[ 0.156009] Setting up standard PCI resources
[ 0.160010] ACPI: EC: Look up EC in DSDT
[ 0.168131] ACPI: Interpreter enabled
[ 0.168135] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.168152] ACPI: Using IOAPIC for interrupt routing
[ 0.176995] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.177637] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.177643] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
[ 0.178249] PCI: Transparent bridge - 0000:00:1e.0
[ 0.178282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.178546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.178663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.178831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.178947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.181929] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.182063] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.182194] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.182325] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.182455] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.182586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.182716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.182846] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.183036] ACPI Warning (tbutils-0217): Incorrect checksum in table
[OEMB] - D9, should be CB [20080321]
[ 0.183061] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.183098] pnp: PnP ACPI init
[ 0.183106] ACPI: bus type pnp registered
[ 0.188560] pnp: PnP ACPI: found 18 devices
[ 0.188564] ACPI: ACPI bus type pnp unregistered
[ 0.188568] PnPBIOS: Disabled by ACPI PNP
[ 0.188841] PCI: Using ACPI for IRQ routing
[ 0.189009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.189015] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.190061] ACPI: RTC can wake from S4
[ 0.190092] system 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[ 0.190103] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.190110] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.190113] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.190116] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.190118] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.190122] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.190125] system 00:09: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.190128] system 00:09: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.190131] system 00:09: iomem range 0xfff00000-0xfffffffe could not
be reserved
[ 0.190140] system 00:0d: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.190143] system 00:0d: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.190150] system 00:0f: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 0.190157] system 00:10: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 0.190165] system 00:11: iomem range 0x0-0x9ffff could not be
reserved
[ 0.190168] system 00:11: iomem range 0xc0000-0xdffff could not be
reserved
[ 0.190171] system 00:11: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.190175] system 00:11: iomem range 0x100000-0x7fffffff could not
be reserved
[ 0.220622] PCI: Bridge: 0000:00:01.0
[ 0.220625] IO window: e000-efff
[ 0.220629] MEM window: 0xcc000000-0xcfffffff
[ 0.220633] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.220637] PCI: Bridge: 0000:00:1c.0
[ 0.220640] IO window: d000-dfff
[ 0.220645] MEM window: disabled.
[ 0.220648] PREFETCH window: disabled.
[ 0.220654] PCI: Bridge: 0000:00:1c.1
[ 0.220656] IO window: c000-cfff
[ 0.220661] MEM window: 0xcbf00000-0xcbffffff
[ 0.220665] PREFETCH window: disabled.
[ 0.220671] PCI: Bridge: 0000:00:1e.0
[ 0.220673] IO window: b000-bfff
[ 0.220678] MEM window: 0xcbe00000-0xcbefffff
[ 0.220682] PREFETCH window: disabled.
[ 0.220702] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 0.220707] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.220724] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 0.220729] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.220746] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 0.220751] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.220762] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.220786] NET: Registered protocol family 2
[ 0.220888] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.221112] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.221789] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.222198] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.222203] TCP reno registered
[ 0.222359] NET: Registered protocol family 1
[ 0.222483] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 0
[ 0.539350] it is
[ 0.879076] Freeing initrd memory: 6840k freed
[ 0.879814] audit: initializing netlink socket (disabled)
[ 0.879834] type=2000 audit(1270315249.876:1): initialized
[ 0.880041] highmem bounce pool size: 64 pages
[ 0.880047] Total HugeTLB memory allocated, 0
[ 0.880115] VFS: Disk quotas dquot_6.5.1
[ 0.880139] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.880178] msgmni has been set to 1750
[ 0.880289] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.880293] io scheduler noop registered
[ 0.880295] io scheduler anticipatory registered
[ 0.880297] io scheduler deadline registered
[ 0.880310] io scheduler cfq registered (default)
[ 0.880412] pci 0000:04:00.0: Boot video device
[ 0.880511] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.880545] assign_interrupt_mode Found MSI capability
[ 0.880573] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.880617] Allocate Port Service[0000:00:01.0:pcie03]
[ 0.880698] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.880731] assign_interrupt_mode Found MSI capability
[ 0.880763] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.880805] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.880845] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.880936] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.880967] assign_interrupt_mode Found MSI capability
[ 0.880999] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.881039] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.881369] isapnp: Scanning for PnP cards...
[ 1.234758] isapnp: No Plug & Play device found
[ 1.237524] hpet_resources: 0xfed00000 is busy
[ 1.237594] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.237720] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.238262] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.238385] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 1.238571] 0000:01:0a.0: ttyS1 at I/O 0xb808 (irq = 22) is a 16450
[ 1.238700] 0000:01:0a.0: ttyS2 at I/O 0xb810 (irq = 22) is a 8250
[ 1.238820] 0000:01:0a.0: ttyS3 at I/O 0xb818 (irq = 22) is a 16450
[ 1.238869] Couldn't register serial port 0000:01:0a.0: -28
[ 1.240629] brd: module loaded
[ 1.240735] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 1.243469] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.243475] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.243622] mice: PS/2 mouse device common for all mice
[ 1.243755] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.243772] rtc0: alarms up to one month
[ 1.243814] cpuidle: using governor ladder
[ 1.243816] cpuidle: using governor menu
[ 1.243821] No iBFT detected.
[ 1.244237] TCP cubic registered
[ 1.244240] NET: Registered protocol family 17
[ 1.244248] Using IPI No-Shortcut mode
[ 1.244384] registered taskstats version 1
[ 1.244530] rtc_cmos 00:03: setting system clock to 2010-04-03
17:20:50 UTC (1270315250)
[ 1.244613] Freeing unused kernel memory: 244k freed
[ 1.266858] input: AT Translated Set 2 keyboard
as /class/input/input0
[ 1.340614] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.340620] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.933502] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 1.933513] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.933529] atl1 0000:02:00.0: version 2.1.3
[ 1.974710] usbcore: registered new interface driver usbfs
[ 1.974738] usbcore: registered new interface driver hub
[ 1.974768] usbcore: registered new device driver usb
[ 1.975940] USB Universal Host Controller Interface driver v3.0
[ 1.975981] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 1.975991] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.975995] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.976117] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 1.976148] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
[ 1.976228] usb usb1: configuration #1 chosen from 1 choice
[ 1.976255] hub 1-0:1.0: USB hub found
[ 1.976261] hub 1-0:1.0: 2 ports detected
[ 2.064108] Uniform Multi-Platform E-IDE driver
[ 2.064113] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 2.080137] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.080141] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.080144] usb usb1: Product: UHCI Host Controller
[ 2.080146] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.080148] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.080205] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 2.080215] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.080219] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.080244] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 2.080275] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
[ 2.080347] usb usb2: configuration #1 chosen from 1 choice
[ 2.080375] hub 2-0:1.0: USB hub found
[ 2.080381] hub 2-0:1.0: 2 ports detected
[ 2.184120] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.184124] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.184127] usb usb2: Product: UHCI Host Controller
[ 2.184129] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.184131] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.184179] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.184189] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.184193] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.184222] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 2.184252] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
[ 2.184325] usb usb3: configuration #1 chosen from 1 choice
[ 2.184355] hub 3-0:1.0: USB hub found
[ 2.184361] hub 3-0:1.0: 2 ports detected
[ 2.198132] Floppy drive(s): fd0 is 1.44M
[ 2.215681] FDC 0 is a post-1991 82077
[ 2.288156] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.288161] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.288165] usb usb3: Product: UHCI Host Controller
[ 2.288168] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.288171] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.288222] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level,
low) -> IRQ 19
[ 2.288234] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.288239] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.288274] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 2.288307] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
[ 2.288394] usb usb4: configuration #1 chosen from 1 choice
[ 2.288423] hub 4-0:1.0: USB hub found
[ 2.288429] hub 4-0:1.0: 2 ports detected
[ 2.392141] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.392146] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.392150] usb usb4: Product: UHCI Host Controller
[ 2.392152] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.392155] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.393198] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level,
low) -> IRQ 20
[ 2.393213] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.393217] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.393254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 2.397164] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.397171] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 2.397178] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcbdffc00
[ 2.424036] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 2.436025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.436119] usb usb5: configuration #1 chosen from 1 choice
[ 2.436149] hub 5-0:1.0: USB hub found
[ 2.436156] hub 5-0:1.0: 8 ports detected
[ 2.492057] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.540154] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.540160] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.540164] usb usb5: Product: EHCI Host Controller
[ 2.540167] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 2.540170] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.542543] No dock devices found.
[ 2.550525] SCSI subsystem initialized
[ 2.559417] libata version 3.00 loaded.
[ 2.560959] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level,
low) -> IRQ 21
[ 2.613717] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[cbefe800-cbefefff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.622237] ata_piix 0000:00:1f.2: version 2.12
[ 2.622260] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level,
low) -> IRQ 17
[ 2.622265] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.622301] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 2.622354] scsi0 : ata_piix
[ 2.622435] scsi1 : ata_piix
[ 2.624006] ata1: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma
0x9400 irq 17
[ 2.624006] ata2: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma
0x9408 irq 17
[ 2.796593] ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 2.796599] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 2.797019] ata1.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 2.797023] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 2.804221] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 2.812607] ata1.00: configured for UDMA/133
[ 2.828598] ata1.01: configured for UDMA/133
[ 2.984155] ata2.01: NODEV after polling detection
[ 2.992334] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 2.992573] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max
UDMA/100
[ 3.008248] ata2.00: configured for UDMA/100
[ 3.008376] scsi 0:0:0:0: Direct-Access ATA ST3500320AS
SD15 PQ: 0 ANSI: 5
[ 3.008530] scsi 0:0:1:0: Direct-Access ATA ST3500320AS
SD15 PQ: 0 ANSI: 5
[ 3.011774] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10
EL00 PQ: 0 ANSI: 5
[ 3.014187] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI
slot 0000:00:1f.1
[ 3.014197] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 18
[ 3.014207] ICH7: not 100% native mode: will probe irqs later
[ 3.014219] ide0: BM-DMA at 0xffa0-0xffa7
[ 3.014227] ide1: BM-DMA at 0xffa8-0xffaf
[ 3.014231] Probing IDE interface ide0...
[ 3.236031] usb 5-4: new high speed USB device using ehci_hcd and
address 4
[ 3.292297] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 3.536032] usb 5-4: new high speed USB device using ehci_hcd and
address 5
[ 3.580070] Probing IDE interface ide1...
[ 3.592292] hub 5-0:1.0: unable to enumerate USB device on port 4
[ 3.892155] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0011d800013f0691]
[ 3.972029] usb 2-2: new full speed USB device using uhci_hcd and
address 3
[ 4.111226] usb 2-2: not running at top speed; connect to a high
speed hub
[ 4.128023] usb 2-2: configuration #1 chosen from 1 choice
[ 4.142364] usb 2-2: New USB device found, idVendor=067b,
idProduct=2507
[ 4.142368] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.142371] usb 2-2: Product: Mass Storage Device
[ 4.142373] usb 2-2: Manufacturer: Prolific Technology Inc.
[ 4.142375] usb 2-2: SerialNumber: 00
[ 4.148079] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.148124] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.180121] Driver 'sd' needs updating - please use bus_type methods
[ 4.180213] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors
(500108 MB)
[ 4.180230] sd 0:0:0:0: [sda] Write Protect is off
[ 4.180232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.180259] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.180320] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors
(500108 MB)
[ 4.180335] sd 0:0:0:0: [sda] Write Protect is off
[ 4.180339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.180366] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.180372] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 4.195896] sda1 sda2 sda3 <<6>Initializing USB Mass Storage
driver...
[ 4.211498] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.211569] usbcore: registered new interface driver usb-storage
[ 4.211572] USB Mass Storage support registered.
[ 4.212342] sda5 >
[ 4.212484] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.212564] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors
(500108 MB)
[ 4.212580] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.212583] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.212610] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.212670] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors
(500108 MB)
[ 4.212686] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.212690] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.212716] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.212720] sdb:<7>usb-storage: device found at 3
[ 4.214222] usb-storage: waiting for device to settle before scanning
[ 4.221695] sdb1
[ 4.221700] sdb: p1 exceeds device capacity
[ 4.221797] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 4.233696] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 4.233701] Uniform CD-ROM driver Revision: 3.20
[ 4.233785] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.253584] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.253609] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 4.253629] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 4.396625] attempt to access beyond end of device
[ 4.396632] sdb: rw=0, want=976783936, limit=976773168
[ 4.396637] Buffer I/O error on device sdb1, logical block 976783872
[ 4.396685] attempt to access beyond end of device
[ 4.396688] sdb: rw=0, want=976783937, limit=976773168
[ 4.396692] Buffer I/O error on device sdb1, logical block 976783873
[ 4.396737] attempt to access beyond end of device
[ 4.396740] sdb: rw=0, want=976783938, limit=976773168
[ 4.396743] Buffer I/O error on device sdb1, logical block 976783874
[ 4.396788] attempt to access beyond end of device
[ 4.396792] sdb: rw=0, want=976783939, limit=976773168
[ 4.396795] Buffer I/O error on device sdb1, logical block 976783875
[ 4.396840] attempt to access beyond end of device
[ 4.396843] sdb: rw=0, want=976783940, limit=976773168
[ 4.396847] Buffer I/O error on device sdb1, logical block 976783876
[ 4.396892] attempt to access beyond end of device
[ 4.396895] sdb: rw=0, want=976783941, limit=976773168
[ 4.396898] Buffer I/O error on device sdb1, logical block 976783877
[ 4.396943] attempt to access beyond end of device
[ 4.396957] sdb: rw=0, want=976783942, limit=976773168
[ 4.396960] Buffer I/O error on device sdb1, logical block 976783878
[ 4.397010] attempt to access beyond end of device
[ 4.397013] sdb: rw=0, want=976783943, limit=976773168
[ 4.397015] Buffer I/O error on device sdb1, logical block 976783879
[ 4.397067] attempt to access beyond end of device
[ 4.397069] sdb: rw=0, want=976783936, limit=976773168
[ 4.397072] Buffer I/O error on device sdb1, logical block 976783872
[ 4.397123] attempt to access beyond end of device
[ 4.397125] sdb: rw=0, want=976783937, limit=976773168
[ 4.397127] attempt to access beyond end of device
[ 4.397130] sdb: rw=0, want=976783938, limit=976773168
[ 4.397132] attempt to access beyond end of device
[ 4.397134] sdb: rw=0, want=976783939, limit=976773168
[ 4.397137] attempt to access beyond end of device
[ 4.397139] sdb: rw=0, want=976783940, limit=976773168
[ 4.397142] attempt to access beyond end of device
[ 4.397144] sdb: rw=0, want=976783941, limit=976773168
[ 4.397147] attempt to access beyond end of device
[ 4.397149] sdb: rw=0, want=976783942, limit=976773168
[ 4.397152] attempt to access beyond end of device
[ 4.397154] sdb: rw=0, want=976783943, limit=976773168
[ 4.397165] attempt to access beyond end of device
[ 4.397168] sdb: rw=0, want=976784112, limit=976773168
[ 4.397170] attempt to access beyond end of device
[ 4.397173] sdb: rw=0, want=976784113, limit=976773168
[ 4.397175] attempt to access beyond end of device
[ 4.397177] sdb: rw=0, want=976784114, limit=976773168
[ 4.397180] attempt to access beyond end of device
[ 4.397182] sdb: rw=0, want=976784115, limit=976773168
[ 4.397185] attempt to access beyond end of device
[ 4.397187] sdb: rw=0, want=976784116, limit=976773168
[ 4.397190] attempt to access beyond end of device
[ 4.397192] sdb: rw=0, want=976784117, limit=976773168
[ 4.397195] attempt to access beyond end of device
[ 4.397197] sdb: rw=0, want=976784118, limit=976773168
[ 4.397199] attempt to access beyond end of device
[ 4.397202] sdb: rw=0, want=976784119, limit=976773168
[ 4.397205] attempt to access beyond end of device
[ 4.397207] sdb: rw=0, want=976784112, limit=976773168
[ 4.397210] attempt to access beyond end of device
[ 4.397212] sdb: rw=0, want=976784113, limit=976773168
[ 4.397214] attempt to access beyond end of device
[ 4.397217] sdb: rw=0, want=976784114, limit=976773168
[ 4.397219] attempt to access beyond end of device
[ 4.397221] sdb: rw=0, want=976784115, limit=976773168
[ 4.397224] attempt to access beyond end of device
[ 4.397226] sdb: rw=0, want=976784116, limit=976773168
[ 4.397229] attempt to access beyond end of device
[ 4.397231] sdb: rw=0, want=976784117, limit=976773168
[ 4.397233] attempt to access beyond end of device
[ 4.397236] sdb: rw=0, want=976784118, limit=976773168
[ 4.397238] attempt to access beyond end of device
[ 4.397241] sdb: rw=0, want=976784119, limit=976773168
[ 4.397298] attempt to access beyond end of device
[ 4.397301] sdb: rw=0, want=976784128, limit=976773168
[ 4.397305] attempt to access beyond end of device
[ 4.397307] sdb: rw=0, want=976784129, limit=976773168
[ 4.397309] attempt to access beyond end of device
[ 4.397312] sdb: rw=0, want=976784130, limit=976773168
[ 4.397315] attempt to access beyond end of device
[ 4.397317] sdb: rw=0, want=976784128, limit=976773168
[ 4.397320] attempt to access beyond end of device
[ 4.397322] sdb: rw=0, want=976784129, limit=976773168
[ 4.397324] attempt to access beyond end of device
[ 4.397327] sdb: rw=0, want=976784130, limit=976773168
[ 4.397334] attempt to access beyond end of device
[ 4.397337] sdb: rw=0, want=976784128, limit=976773168
[ 4.397339] attempt to access beyond end of device
[ 4.397342] sdb: rw=0, want=976784129, limit=976773168
[ 4.397344] attempt to access beyond end of device
[ 4.397346] sdb: rw=0, want=976784130, limit=976773168
[ 4.397353] attempt to access beyond end of device
[ 4.397355] sdb: rw=0, want=976784128, limit=976773168
[ 4.397358] attempt to access beyond end of device
[ 4.397360] sdb: rw=0, want=976784129, limit=976773168
[ 4.397362] attempt to access beyond end of device
[ 4.397365] sdb: rw=0, want=976784130, limit=976773168
[ 4.397371] attempt to access beyond end of device
[ 4.397373] sdb: rw=0, want=976784128, limit=976773168
[ 4.397375] attempt to access beyond end of device
[ 4.397378] sdb: rw=0, want=976784129, limit=976773168
[ 4.397380] attempt to access beyond end of device
[ 4.397383] sdb: rw=0, want=976784130, limit=976773168
[ 4.397389] attempt to access beyond end of device
[ 4.397392] sdb: rw=0, want=976784128, limit=976773168
[ 4.397394] attempt to access beyond end of device
[ 4.397397] sdb: rw=0, want=976784129, limit=976773168
[ 4.397399] attempt to access beyond end of device
[ 4.397401] sdb: rw=0, want=976784130, limit=976773168
[ 4.397408] attempt to access beyond end of device
[ 4.397410] sdb: rw=0, want=976784128, limit=976773168
[ 4.397413] attempt to access beyond end of device
[ 4.397415] sdb: rw=0, want=976784129, limit=976773168
[ 4.397417] attempt to access beyond end of device
[ 4.397420] sdb: rw=0, want=976784130, limit=976773168
[ 4.397428] attempt to access beyond end of device
[ 4.397431] sdb: rw=0, want=976784064, limit=976773168
[ 4.397433] attempt to access beyond end of device
[ 4.397436] sdb: rw=0, want=976784065, limit=976773168
[ 4.397438] attempt to access beyond end of device
[ 4.397440] sdb: rw=0, want=976784066, limit=976773168
[ 4.397443] attempt to access beyond end of device
[ 4.397445] sdb: rw=0, want=976784067, limit=976773168
[ 4.397448] attempt to access beyond end of device
[ 4.397450] sdb: rw=0, want=976784068, limit=976773168
[ 4.397452] attempt to access beyond end of device
[ 4.397455] sdb: rw=0, want=976784069, limit=976773168
[ 4.397457] attempt to access beyond end of device
[ 4.397459] sdb: rw=0, want=976784070, limit=976773168
[ 4.397462] attempt to access beyond end of device
[ 4.397464] sdb: rw=0, want=976784071, limit=976773168
[ 4.397472] attempt to access beyond end of device
[ 4.397475] sdb: rw=0, want=976784120, limit=976773168
[ 4.397477] attempt to access beyond end of device
[ 4.397479] sdb: rw=0, want=976784121, limit=976773168
[ 4.397482] attempt to access beyond end of device
[ 4.397484] sdb: rw=0, want=976784122, limit=976773168
[ 4.397486] attempt to access beyond end of device
[ 4.397489] sdb: rw=0, want=976784123, limit=976773168
[ 4.397491] attempt to access beyond end of device
[ 4.397494] sdb: rw=0, want=976784124, limit=976773168
[ 4.397496] attempt to access beyond end of device
[ 4.397499] sdb: rw=0, want=976784125, limit=976773168
[ 4.397501] attempt to access beyond end of device
[ 4.397503] sdb: rw=0, want=976784126, limit=976773168
[ 4.397506] attempt to access beyond end of device
[ 4.397508] sdb: rw=0, want=976784127, limit=976773168
[ 4.397515] attempt to access beyond end of device
[ 4.397518] sdb: rw=0, want=976784128, limit=976773168
[ 4.397520] attempt to access beyond end of device
[ 4.397522] sdb: rw=0, want=976784129, limit=976773168
[ 4.397525] attempt to access beyond end of device
[ 4.397527] sdb: rw=0, want=976784130, limit=976773168
[ 4.397534] attempt to access beyond end of device
[ 4.397536] sdb: rw=0, want=976784128, limit=976773168
[ 4.397539] attempt to access beyond end of device
[ 4.397541] sdb: rw=0, want=976784129, limit=976773168
[ 4.397543] attempt to access beyond end of device
[ 4.397546] sdb: rw=0, want=976784130, limit=976773168
[ 4.587363] device-mapper: uevent: version 1.0.3
[ 4.588525] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
[ 4.614328] PM: Starting manual resume from disk
[ 9.182074] udevd version 125 started
[ 9.214065] usb-storage: device scan complete
[ 9.250069] scsi 2:0:0:0: Direct-Access ST316081 2A
3.AA PQ: 0 ANSI: 0
[ 9.255045] sd 2:0:0:0: [sdc] 312581807 512-byte hardware sectors
(160042 MB)
[ 9.260040] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.260044] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9.260047] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.265045] sd 2:0:0:0: [sdc] 312581807 512-byte hardware sectors
(160042 MB)
[ 9.270044] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.270048] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9.270051] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.270107] sdc: sdc1
[ 9.283161] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 9.283206] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 9.695970] attempt to access beyond end of device
[ 9.695976] sdb: rw=0, want=976783936, limit=976773168
[ 9.695979] __ratelimit: 66 messages suppressed
[ 9.695981] Buffer I/O error on device sdb1, logical block 976783872
[ 9.696053] attempt to access beyond end of device
[ 9.696055] sdb: rw=0, want=976783937, limit=976773168
[ 9.696058] attempt to access beyond end of device
[ 9.696060] sdb: rw=0, want=976783938, limit=976773168
[ 9.696063] attempt to access beyond end of device
[ 9.696065] sdb: rw=0, want=976783939, limit=976773168
[ 9.696068] attempt to access beyond end of device
[ 9.696070] sdb: rw=0, want=976783940, limit=976773168
[ 9.696073] attempt to access beyond end of device
[ 9.696075] sdb: rw=0, want=976783941, limit=976773168
[ 9.696078] attempt to access beyond end of device
[ 9.696080] sdb: rw=0, want=976783942, limit=976773168
[ 9.696082] attempt to access beyond end of device
[ 9.696085] sdb: rw=0, want=976783943, limit=976773168
[ 9.696088] attempt to access beyond end of device
[ 9.696090] sdb: rw=0, want=976783936, limit=976773168
[ 9.696093] attempt to access beyond end of device
[ 9.696095] sdb: rw=0, want=976783937, limit=976773168
[ 9.696098] attempt to access beyond end of device
[ 9.696100] sdb: rw=0, want=976783938, limit=976773168
[ 9.696103] attempt to access beyond end of device
[ 9.696105] sdb: rw=0, want=976783939, limit=976773168
[ 9.696107] attempt to access beyond end of device
[ 9.696110] sdb: rw=0, want=976783940, limit=976773168
[ 9.696112] attempt to access beyond end of device
[ 9.696114] sdb: rw=0, want=976783941, limit=976773168
[ 9.696117] attempt to access beyond end of device
[ 9.696119] sdb: rw=0, want=976783942, limit=976773168
[ 9.696122] attempt to access beyond end of device
[ 9.696124] sdb: rw=0, want=976783943, limit=976773168
[ 9.696137] attempt to access beyond end of device
[ 9.696139] sdb: rw=0, want=976784112, limit=976773168
[ 9.696142] attempt to access beyond end of device
[ 9.696144] sdb: rw=0, want=976784113, limit=976773168
[ 9.696147] attempt to access beyond end of device
[ 9.696149] sdb: rw=0, want=976784114, limit=976773168
[ 9.696151] attempt to access beyond end of device
[ 9.696154] sdb: rw=0, want=976784115, limit=976773168
[ 9.696156] attempt to access beyond end of device
[ 9.696159] sdb: rw=0, want=976784116, limit=976773168
[ 9.696161] attempt to access beyond end of device
[ 9.696163] sdb: rw=0, want=976784117, limit=976773168
[ 9.696166] attempt to access beyond end of device
[ 9.696168] sdb: rw=0, want=976784118, limit=976773168
[ 9.696171] attempt to access beyond end of device
[ 9.696173] sdb: rw=0, want=976784119, limit=976773168
[ 9.696176] attempt to access beyond end of device
[ 9.696178] sdb: rw=0, want=976784112, limit=976773168
[ 9.696181] attempt to access beyond end of device
[ 9.696183] sdb: rw=0, want=976784113, limit=976773168
[ 9.696186] attempt to access beyond end of device
[ 9.696188] sdb: rw=0, want=976784114, limit=976773168
[ 9.696190] attempt to access beyond end of device
[ 9.696193] sdb: rw=0, want=976784115, limit=976773168
[ 9.696195] attempt to access beyond end of device
[ 9.696197] sdb: rw=0, want=976784116, limit=976773168
[ 9.696200] attempt to access beyond end of device
[ 9.696202] sdb: rw=0, want=976784117, limit=976773168
[ 9.696205] attempt to access beyond end of device
[ 9.696207] sdb: rw=0, want=976784118, limit=976773168
[ 9.696209] attempt to access beyond end of device
[ 9.696212] sdb: rw=0, want=976784119, limit=976773168
[ 9.696324] attempt to access beyond end of device
[ 9.696327] sdb: rw=0, want=976784128, limit=976773168
[ 9.696330] attempt to access beyond end of device
[ 9.696332] sdb: rw=0, want=976784129, limit=976773168
[ 9.696335] attempt to access beyond end of device
[ 9.696337] sdb: rw=0, want=976784130, limit=976773168
[ 9.696340] attempt to access beyond end of device
[ 9.696343] sdb: rw=0, want=976784128, limit=976773168
[ 9.696345] attempt to access beyond end of device
[ 9.696348] sdb: rw=0, want=976784129, limit=976773168
[ 9.696350] attempt to access beyond end of device
[ 9.696352] sdb: rw=0, want=976784130, limit=976773168
[ 9.696360] attempt to access beyond end of device
[ 9.696363] sdb: rw=0, want=976784128, limit=976773168
[ 9.696365] attempt to access beyond end of device
[ 9.696367] sdb: rw=0, want=976784129, limit=976773168
[ 9.696370] attempt to access beyond end of device
[ 9.696372] sdb: rw=0, want=976784130, limit=976773168
[ 9.696379] attempt to access beyond end of device
[ 9.696381] sdb: rw=0, want=976784128, limit=976773168
[ 9.696384] attempt to access beyond end of device
[ 9.696386] sdb: rw=0, want=976784129, limit=976773168
[ 9.696389] attempt to access beyond end of device
[ 9.696391] sdb: rw=0, want=976784130, limit=976773168
[ 9.696397] attempt to access beyond end of device
[ 9.696399] sdb: rw=0, want=976784128, limit=976773168
[ 9.696402] attempt to access beyond end of device
[ 9.696404] sdb: rw=0, want=976784129, limit=976773168
[ 9.696407] attempt to access beyond end of device
[ 9.696409] sdb: rw=0, want=976784130, limit=976773168
[ 9.696415] attempt to access beyond end of device
[ 9.696418] sdb: rw=0, want=976784128, limit=976773168
[ 9.696420] attempt to access beyond end of device
[ 9.696423] sdb: rw=0, want=976784129, limit=976773168
[ 9.696425] attempt to access beyond end of device
[ 9.696428] sdb: rw=0, want=976784130, limit=976773168
[ 9.696434] attempt to access beyond end of device
[ 9.696437] sdb: rw=0, want=976784128, limit=976773168
[ 9.696439] attempt to access beyond end of device
[ 9.696442] sdb: rw=0, want=976784129, limit=976773168
[ 9.696444] attempt to access beyond end of device
[ 9.696446] sdb: rw=0, want=976784130, limit=976773168
[ 9.696455] attempt to access beyond end of device
[ 9.696457] sdb: rw=0, want=976784064, limit=976773168
[ 9.696460] attempt to access beyond end of device
[ 9.696462] sdb: rw=0, want=976784065, limit=976773168
[ 9.696465] attempt to access beyond end of device
[ 9.696467] sdb: rw=0, want=976784066, limit=976773168
[ 9.696469] attempt to access beyond end of device
[ 9.696472] sdb: rw=0, want=976784067, limit=976773168
[ 9.696474] attempt to access beyond end of device
[ 9.696476] sdb: rw=0, want=976784068, limit=976773168
[ 9.696479] attempt to access beyond end of device
[ 9.696481] sdb: rw=0, want=976784069, limit=976773168
[ 9.696484] attempt to access beyond end of device
[ 9.696486] sdb: rw=0, want=976784070, limit=976773168
[ 9.696561] attempt to access beyond end of device
[ 9.696564] sdb: rw=0, want=976784071, limit=976773168
[ 9.696584] attempt to access beyond end of device
[ 9.696587] sdb: rw=0, want=976784120, limit=976773168
[ 9.696589] attempt to access beyond end of device
[ 9.696592] sdb: rw=0, want=976784121, limit=976773168
[ 9.696594] attempt to access beyond end of device
[ 9.696596] sdb: rw=0, want=976784122, limit=976773168
[ 9.696599] attempt to access beyond end of device
[ 9.696601] sdb: rw=0, want=976784123, limit=976773168
[ 9.696604] attempt to access beyond end of device
[ 9.696606] sdb: rw=0, want=976784124, limit=976773168
[ 9.696608] attempt to access beyond end of device
[ 9.696611] sdb: rw=0, want=976784125, limit=976773168
[ 9.696613] attempt to access beyond end of device
[ 9.696616] sdb: rw=0, want=976784126, limit=976773168
[ 9.696618] attempt to access beyond end of device
[ 9.696620] sdb: rw=0, want=976784127, limit=976773168
[ 9.696628] attempt to access beyond end of device
[ 9.696630] sdb: rw=0, want=976784128, limit=976773168
[ 9.696633] attempt to access beyond end of device
[ 9.696635] sdb: rw=0, want=976784129, limit=976773168
[ 9.696637] attempt to access beyond end of device
[ 9.696640] sdb: rw=0, want=976784130, limit=976773168
[ 9.696646] attempt to access beyond end of device
[ 9.696648] sdb: rw=0, want=976784128, limit=976773168
[ 9.696651] attempt to access beyond end of device
[ 9.696653] sdb: rw=0, want=976784129, limit=976773168
[ 9.696656] attempt to access beyond end of device
[ 9.696658] sdb: rw=0, want=976784130, limit=976773168
[ 10.296595] Linux agpgart interface v0.103
[ 10.600720] input: Power Button (FF) as /class/input/input1
[ 10.629903] ACPI: Power Button (FF) [PWRF]
[ 10.629987] input: Power Button (CM) as /class/input/input2
[ 10.660061] ACPI: Power Button (CM) [PWRB]
[ 11.422677] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level,
low) -> IRQ 19
[ 11.422697] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.744493] intel_rng: FWH not detected
[ 11.791398] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03
(30-Apr-2008)
[ 11.791463] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 11.791488] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.917664] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level,
low) -> IRQ 17
[ 12.142006] input: PC Speaker as /class/input/input3
[ 12.824021] input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
[ 12.824021] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.824021] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE,EPP]
[ 13.363736] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[ 13.512744] loop: module loaded
[ 13.725144] attempt to access beyond end of device
[ 13.725144] sdb: rw=0, want=976783936, limit=976773168
[ 13.725144] attempt to access beyond end of device
[ 13.725144] sdb: rw=0, want=976784112, limit=976773168
[ 97.965090] fuse init (API version 7.9)
[ 98.788040] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 99.788136] Netfilter messages via NETLINK v0.30.
[ 99.937992] xt_connlimit: Unknown symbol nf_ct_l3proto_module_put
[ 99.938157] xt_connlimit: Unknown symbol __nf_conntrack_find
[ 99.938213] xt_connlimit: Unknown symbol nf_ct_l3proto_try_module_get
[ 99.938268] xt_connlimit: Unknown symbol nf_ct_get_tuplepr
[ 100.628100] NET: Registered protocol family 10
[ 100.628500] lo: Disabled Privacy Extensions
[ 102.126722] device 1057:3052 is grabbed by driver serial: try to
release
[ 102.126722] ACPI: PCI interrupt for device 0000:01:0a.0 disabled
[ 102.152465] slamr: module license 'Smart Link Ltd.' taints kernel.
[ 102.156617] slamr: SmartLink AMRMO modem.
[ 102.156655] slamr: probe 1057:3052 SL1900 card...
[ 102.156672] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 102.443247] slamr: slamr0 is SL1900 card.
[ 107.344224] lp0: using parport0 (interrupt-driven).
[ 107.367838] ppdev: user-space parallel port driver
[ 113.001905] attempt to access beyond end of device
[ 113.001917] sdb: rw=0, want=976783943, limit=976773168
[ 113.001920] __ratelimit: 74 messages suppressed
[ 113.001924] Buffer I/O error on device sdb1, logical block 122097984
[ 113.001991] attempt to access beyond end of device
[ 113.001994] sdb: rw=0, want=976783943, limit=976773168
[ 113.001997] Buffer I/O error on device sdb1, logical block 122097984
[ 113.002461] attempt to access beyond end of device
[ 113.002467] sdb: rw=0, want=976784119, limit=976773168
[ 113.002470] Buffer I/O error on device sdb1, logical block 122098006
[ 113.002523] attempt to access beyond end of device
[ 113.002525] sdb: rw=0, want=976784119, limit=976773168
[ 113.002528] Buffer I/O error on device sdb1, logical block 122098006
[ 113.002991] attempt to access beyond end of device
[ 113.002999] sdb: rw=0, want=976784071, limit=976773168
[ 113.003002] Buffer I/O error on device sdb1, logical block 122098000
[ 113.003055] attempt to access beyond end of device
[ 113.003058] sdb: rw=0, want=976784071, limit=976773168
[ 113.003060] Buffer I/O error on device sdb1, logical block 122098000
[ 113.003516] attempt to access beyond end of device
[ 113.003522] sdb: rw=0, want=976784127, limit=976773168
[ 113.003525] Buffer I/O error on device sdb1, logical block 122098007
[ 113.461342] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 115.107337] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 115.107349] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 115.107504] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue
Dec 8 18:51:41 PST 2009
[ 130.385894] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
--
Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
Reply to: