Re: No puedo montar discos duros y pendrives
Ante todo gracias por tratar de ayudarme. Antes de continuar comento que
no hay manera de saber qué montar, por lo tanto si alguien me puede
comentar más métodos aparte de mirar en /var/log/messages y en el
syslog.
Manuel, al hacer lo que dices aparece todo tipo de información sobre el
disco duro que acabo de conectar, pero no encuentro el /dev/loquesea,
aparentemente no sale.
Félix, al añadirlo me dice que mi usuario ya es miembro de plugdeb.
Javier, entro al monitor del sistema y veo dos procesos, dbus-daemon y
dbus-launch, aunque no encuentro nada de fam. ¿Puedo ver si está
ejecutándose o no de otra forma?
La parte de usuarios y grupos está perfectamente, tiene todos los
privilegios posibles.
Nach0, al poner dmesg | grep sd sale:
[ 10.929152] Driver 'sd' needs updating - please use bus_type methods
[ 10.933162] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 10.936669] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 10.939445] sd 0:0:0:2: [sdc] Attached SCSI removable disk
[ 10.941966] sd 0:0:0:3: [sdd] Attached SCSI removable disk
[ 10.947446] sd 0:0:0:4: [sde] Attached SCSI removable disk
[ 19.460995] sd 1:0:0:0: [sdf] 781422768 512-byte hardware sectors
(400088 MB)
[ 19.480269] sd 1:0:0:0: [sdf] Test WP failed, assume Write Enabled
[ 19.480269] sd 1:0:0:0: [sdf] Assuming drive cache: write through
[ 19.484269] sd 1:0:0:0: [sdf] 781422768 512-byte hardware sectors
(400088 MB)
[ 19.492292] sd 1:0:0:0: [sdf] Test WP failed, assume Write Enabled
[ 19.492292] sd 1:0:0:0: [sdf] Assuming drive cache: write through
[ 19.492292] sdf: sdf1
[ 19.522830] sd 1:0:0:0: [sdf] Attached SCSI disk
[ 19.523543] sd 2:0:0:0: [sdg] 976773168 512-byte hardware sectors
(500108 MB)
[ 19.527295] sd 2:0:0:0: [sdg] Write Protect is off
[ 19.527295] sd 2:0:0:0: [sdg] Mode Sense: 03 00 00 00
[ 19.527295] sd 2:0:0:0: [sdg] Assuming drive cache: write through
[ 19.527839] sd 2:0:0:0: [sdg] 976773168 512-byte hardware sectors
(500108 MB)
[ 19.531292] sd 2:0:0:0: [sdg] Write Protect is off
[ 19.531294] sd 2:0:0:0: [sdg] Mode Sense: 03 00 00 00
[ 19.531294] sd 2:0:0:0: [sdg] Assuming drive cache: write through
[ 19.531294] sdg: sdg1 sdg2
[ 19.553905] sd 2:0:0:0: [sdg] Attached SCSI disk
[77357.624369] sd 3:0:0:0: [sdg] 976773168 512-byte hardware sectors
(500108 MB)
[77357.624369] sd 3:0:0:0: [sdg] Write Protect is off
[77357.624369] sd 3:0:0:0: [sdg] Mode Sense: 03 00 00 00
[77357.624369] sd 3:0:0:0: [sdg] Assuming drive cache: write through
[77357.628383] sd 3:0:0:0: [sdg] 976773168 512-byte hardware sectors
(500108 MB)
[77357.629258] sd 3:0:0:0: [sdg] Write Protect is off
[77357.629266] sd 3:0:0:0: [sdg] Mode Sense: 03 00 00 00
[77357.629270] sd 3:0:0:0: [sdg] Assuming drive cache: write through
[77357.629276] sdg: sdg1 sdg2
[77357.655243] sd 3:0:0:0: [sdg] Attached SCSI disk
Poniendo dmesg | grep hd:
[ 0.000000] Kernel command line: root=/dev/hda2 ro quiet
[ 2.631525] hda: ST3200021A, ATA DISK drive
[ 3.303425] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.303700] hda: UDMA/100 mode selected
[ 4.513582] hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[ 5.394812] hdd: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
[ 5.450715] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.458654] hdc: UDMA/33 mode selected
[ 5.458654] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.458654] hdd: UDMA/33 mode selected
[ 5.644519] hda: max request size: 512KiB
[ 5.644897] hda: 390721968 sectors (200049 MB) w/2048KiB Cache,
CHS=24321/255/63
[ 5.645046] hda: cache flushes supported
[ 5.645108] hda:<6>hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 5.652371] hda1 < hda5<6>hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW
drive, 2048kB Cache
[ 5.664369] hda6 hda7 hda8 > hda2
[ 11.586873] Adding 3903724k swap on /dev/hda5. Priority:-1 extents:1
across:3903724k
[ 11.983613] EXT3 FS on hda2, internal journal
[ 13.412947] EXT3 FS on hda8, internal journal
[ 13.439260] EXT3 FS on hda6, internal journal
[ 13.465315] EXT3 FS on hda7, internal journal
Osvaldo, al poner lsusb me dice ésto:
Bus 005 Device 018: ID 059b:037b Iomega Corp.
Bus 005 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1
Card Reader
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 029: ID 10d5:000d Uni Class Technology Co., Ltd
Bus 003 Device 028: ID 0425:0101 Motorola Semiconductors HK, Ltd G-Tech
Wireless Mouse & Keyboard
Bus 003 Device 027: ID 058f:9254 Alcor Micro Corp. Hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
No parece ser por el hardware, ya que lo he cambiado de sitio y
funcionan bien todos.
Muchísimas gracias por la ayuda, saludos.
Reply to: