buen dia disculpen la demora y aqui tengo las salidas.. del dmesg | tail
Inicio debian
remuevo el usb-core y el usbserial y el airprime
agrego el modulo usbserial con el id y vendor del procucto.
modprobe usbserial vendor=0x0fce product=0xd0cf
dummies# dmesg | tail
usbcore: deregistering interface driver usb-storage
usbcore: deregistering interface driver airprime
drivers/usb/serial/usb-serial.c: USB Serial deregistering driver airprime
usbcore: deregistering interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
usbcore: deregistering interface driver usbserial
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
Conecto el modem MD300 y hago dmesg|tail
dummies# dmesg | tail
sd 1:0:0:0: [sda] Mode Sense: 00 c0 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 503521 512-byte hardware sectors (258 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 c0 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI removable disk
UDF-fs: No VRS found
ISOFS: Unable to identify CD-ROM format.
dummies#
remuevo el usb-core y el usbserial
agrego el id y vendor del producto
modprobe usbserial vendor=0x0fce product=0xd0cf
y el dmesg em dice :
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbserial_generic 1-2:1.0: generic converter detected
usb 1-2: generic converter now attached to ttyUSB0
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
y me genera el ttyUSB0 . Lei en una rticulo que para que s e conecte debe crear al menos tres dispositivos ttyUSB0 ttyUSB1 ttyUSB2 pero no se. si es verdad. Espero que estos datos sean suficientes.
Ejecuto gnome-ppp como root y esta es la salida
gnome-ppp
WVCONF: /root/.wvdial.conf
GNOME PPP: Connecting...
GNOME PPP: STDERR: --> Ignoring malformed input line: ";Do NOT edit this file by hand!"
GNOME PPP: STDERR: --> WvDial: Internet dialer version 1.56
GNOME PPP: STDERR: --> Cannot get information for serial port.
GNOME PPP: STDERR: --> Initializing modem.
GNOME PPP: STDERR: --> Sending: ATZ
GNOME PPP: STDERR: --> Sending: ATQ0
GNOME PPP: STDERR: --> Re-Sending: ATZ
GNOME PPP: STDERR: --> Modem not responding.
GNOME PPP: Unable to KILL wvdial process!
--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
Ejecuto como user normal y esta es la salida
dummies:~$ gnome-ppp
WVCONF: /home/javier/.wvdial.conf
GNOME PPP: STDOUT: Editing `/dev/null'.
GNOME PPP: STDERR: WvModem<*1>: Cannot set information for serial port.
GNOME PPP: STDOUT:
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDOUT: Scanning your serial ports for a modem.
GNOME PPP: STDOUT:
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
GNOME PPP: STDERR: Modem Port Scan<*1>: S1 S2 S3
GNOME PPP: STDERR: WvModem<*1>: Cannot get information for serial port.
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
GNOME PPP: STDOUT:
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Sorry, no modem was detected! Is it in use by another program?
GNOME PPP: STDOUT: Did you configure it properly with setserial?
GNOME PPP: STDOUT:
GNOME PPP: STDOUT:
wvdial.conf
===========
[Dialer Defaults]
Modem = /dev/ttyUSB0
ISDN = off
Modem Type = USB Modem
Baud = 115200
Init = ATX3
Init2 =
Init3 =
Init4 =
Init5 =
Init6 =
Init7 =
Init8 =
Init9 =
Phone = *99***1#
Phone1 =
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM1L3DT
Ask Password = off
Password = 3616
Username = ctigprs
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = off
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = off
;Do NOT edit this file by hand!