Re: Salida VGA en laptop HP para Linux
El lun, 16-04-2007 a las 19:21 +0200, Antonio Trujillo Carmona escribió:
> El lun, 16-04-2007 a las 14:59 +0200, Paúl Criollo Ortiz escribió:
> > Saludos...
> > Hace tiempo formule una pregunta, respeto de como hacer para que mi
> > laptop HP nx6315, pueda sacar video por el puerto vga a un proyector
> > multimedia o monitor......algunos me informaron que active la tecla
> > FN, OK, SHIFT F6, etc, pero nadaaa
> > Probe con Centos 4.4, 5.0, Debian 4.0, OpenSuse 10.2, Suse ENterprise
> > 10.2, pero nada, inclusive esta laptop esta certificada para SED 10.2
> > pero nada.......
> >
> > En la ultilidad de Configuracion de Monitor de Centos y Suse hay una
> > opcion para usar dos monitores, pero dice segundo monitor y segunDA
> > TARJETA, probe alli pero nada...pero solo tengo una sola tarjetya de
> > video ATI, y serian los 2 monitores, el LCD y el CRT o el
> > proyector........
> >
> > Alguno de ustedes conoce algun metodo, o la forma correcta se setear
> > el xorg.conf, para manejar 02 monitores o monitor lcd/proyector, y
> > cual tecla tilizar para activar ambos modos de video...
> >
> > realmente quierto trabajar en la laptop para capacitacion con software
> > libre, pero tener la consola y las x en las dos salidas de video a la
> > vez...
> >
> > att.
> >
> > paul criollo
> >
> >
> > ______________________________________________________________________
> Yo, en el trabajo, tengo ese mismo, mañana te mando el xorg pero te
> adelanto qque , en mi configuración, tienes que tener enchufado el
> segundo monitor antes de encenderlo si no no funciona y no sirven de
> nada las teclas.
cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
Screen "aticonfig-Screen[1]" LeftOf
"aticonfig-Screen[0]"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "ServerFlags"
Option "Xinerama" "1"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "Monitor genérico"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955
(PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
BusID "PCI:1:5:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955
(PCIE)"
Monitor "Monitor genérico"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
--
Por favor, NO utilice formatos de archivo propietarios para el
intercambio de documentos, como DOC y XLS, sino HTML, RTF, TXT,
CSV o cualquier otro que no obligue a utilizar un programa de un
fabricante concreto para tratar la información contenida en él.
SALUD.
Reply to: