Re: i810 y aceleracion gráfica
El Viernes, 9 de Junio de 2006 13:10, ChEnChO escribió:
> 2006/6/10, Enrique Jiménez Campos <ejcampos@gmail.com>:
> > Estoy bastante molesto al no poder usar la potencia de mi portatil al
> > 100%, resulta que tengo la tarjeta grafica integrada en placa ( Intel
> > 82852/855GM Integrated Graphics 64 mb ), me he bajado los siguientes
> > script y los he ejecutado:
> >
> > - common-20060309-linux.i386
> > - i915-20060313-linux.i386
> >
> > Estos son los driver que "en teoria" son los que debo ejecutar(segun un
> > howto en google).
> > una vez hecho esto cargo los modulos con :
> >
> > modprobe i915 drm
> >
> > reinicio kdm y nada el glxgears va muy lento, creo que es por usar xorg
> > xq sin embargo con knoppix y xfree me reconocia la aceleracion
> > automaticamente,
>
> knoppix y xfree != debian y xorg 7.0
>
> > Aqui les pongo la salida de lspci, lsmod y el fichero xorg.conf:
> >
> > $ lspci
> >
> >
> > 0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM
> > Integrated Graphics Device (rev 02)
> >
> >
> > $ lsmod
> >
> > Module Size Used by
> > ipv6 229504 8
> > pcmcia 35580 2
> > nls_iso8859_1 4160 1
> > nls_cp437 5824 1
> > vfat 11936 1
> > fat 47516 1 vfat
> > dm_mod 49204 0
> > i915 18368 0
> > drm 67576 1 i915
> > acerhk 25960 0
> > sr_mod 16100 0
> > sbp2 19876 0
> > scsi_mod 124236 2 sr_mod,sbp2
> > ide_generic 1344 0 [permanent]
> > shpchp 39904 0
> > pci_hotplug 25020 1 shpchp
> > joydev 9088 0
> > ipw2200 102284 0
> > i2c_i801 8172 0
> > snd_intel8x0m 15852 0
> > snd_pcm_oss 44224 0
> > snd_mixer_oss 15904 1 snd_pcm_oss
> > snd_intel8x0 30172 3
> > snd_ac97_codec 83264 2 snd_intel8x0m,snd_intel8x0
> > snd_ac97_bus 2304 1 snd_ac97_codec
> > ieee80211 28360 1 ipw2200
> > ieee80211_crypt 5952 1 ieee80211
> > i2c_core 19840 1 i2c_i801
> > intel_agp 21084 1
> > agpgart 29864 3 drm,intel_agp
> > snd_pcm 77060 5
> > snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
> > snd_timer 21636 2 snd_pcm
> > snd 48384 11
> > snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_p
> >cm,snd_timer eth1394 19044 0
> > yenta_socket 23916 2
> > rsrc_nonstatic 12096 1 yenta_socket
> > pcmcia_core 38228 3 pcmcia,yenta_socket,rsrc_nonstatic
> > evdev 8992 0
> > mousedev 10880 1
> > tsdev 7456 0
> > firmware_class 9824 2 pcmcia,ipw2200
> > soundcore 9216 1 snd
> > psmouse 34664 0
> > wbsd 16936 0
> > mmc_core 22944 1 wbsd
> > rtc 12532 0
> > snd_page_alloc 10024 3 snd_intel8x0m,snd_intel8x0,snd_pcm
> > serio_raw 6916 0
> > parport_pc 32336 0
> > parport 33192 1 parport_pc
> > ext3 121192 1
> > jbd 51412 1 ext3
> > mbcache 8292 1 ext3
> > usbhid 33088 0
> > ide_cd 35936 0
> > cdrom 32336 2 sr_mod,ide_cd
> > ide_disk 14816 4
> > ehci_hcd 28168 0
> > uhci_hcd 28048 0
> > piix 9444 0 [permanent]
> > generic 4388 0 [permanent]
> > ide_core 113868 5 ide_generic,ide_cd,ide_disk,piix,generic
> > usbcore 113664 4 usbhid,ehci_hcd,uhci_hcd
> > b44 23244 0
> > ohci1394 30416 0
> > ieee1394 87256 3 sbp2,eth1394,ohci1394
> > mii 5280 1 b44
> > thermal 13320 0
> > processor 25640 1 thermal
> > fan 4676 0
> >
> >
> > --- Xorg.conf ---
> >
> >
> > /etc/X11/xorg.conf (xorg X Window System server configuration file)
> > #
> > # This file was generated by dexconf, the Debian X Configuration tool,
> > using # values from the debconf database.
> > #
> > # Edit this file with caution, and see the /etc/X11/xorg.conf manual
> > page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
> > #
> > # This file is automatically updated on xserver-xorg package upgrades
> > *only* # if it has not been modified since the last upgrade of the
> > xserver-xorg # package.
> > #
> > # If you have edited this file but would like it to be automatically
> > updated # again, run the following command:
> > # sudo dpkg-reconfigure -phigh xserver-xorg
> >
> > Section "Files"
> > FontPath "/usr/share/fonts/X11/misc"
> > FontPath "/usr/X11R6/lib/X11/fonts/misc"
> > FontPath "/usr/share/fonts/X11/cyrillic"
> > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
> > FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> > FontPath "/usr/share/fonts/X11/Type1"
> > FontPath "/usr/X11R6/lib/X11/fonts/Type1"
> > FontPath "/usr/share/fonts/X11/100dpi"
> > FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
> > FontPath "/usr/share/fonts/X11/75dpi"
> > FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
> > # path to defoma fonts
> > FontPath
> > "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection
> >
> > ection "Module"
> > Load "bitmap"
> > Load "ddc"
> > Load "dri"
> > Load "extmod"
> > Load "freetype"
> > Load "glx"
> > Load "int10"
> > Load "type1"
> > Load "vbe"
> > ## YEAHHHH
> > Load "dbe"
> > Load "record"
> > Load "xtrap"
> > Load "type1"
> > Load "speedo"
> > ## /yeahhhh
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "kbd"
> > Option "CoreKeyboard"
> > Option "XkbRules" "xorg"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "es"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ExplorerPS/2"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
> > Section "Device"
> > Identifier "Intel Corporation 82852/855GM Integrated
> > Graphics Device"
> > Driver "i810"
> > #yeah
> > Option "NoAccel" "false"
> > Option "DRI" "false"
>
> y si lo pones a true?
>
> > BusID "PCI:0:2:0"
> > VideoRam 64000
> > ChipSet "915GM"
> > Card "i810 915GM"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor genérico"
> > Option "DPMS"
> > HorizSync 28-51
> > VertRefresh 43-60
> > EndSection
> >
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "Intel Corporation 82852/855GM Integrated
> > Graphics Device"
> > Monitor "Monitor genérico"
> > DefaultDepth 24
> > SubSection "Display"
> > Depth 1
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > SubSection "Display"
> > Depth 4
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > SubSection "Display"
> > Depth 8
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > SubSection "Display"
> > Depth 15
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > SubSection "Display"
> > Depth 16
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > SubSection "Display"
> > Depth 24
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > EndSection
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen "Default Screen"
> > InputDevice "Generic Keyboard"
> > InputDevice "Configured Mouse"
> > EndSection
> >
> > Section "DRI"
> > Group 0
> > Mode 0666
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > Option "RENDER" "Enable"
> > Endsection
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen "Default Screen"
> > InputDevice "Generic Keyboard"
> > InputDevice "Configured Mouse"
> > EndSection
> >
> >
> >
> >
> > helpppppp :P
>
> de todas maneras, xorg 7.0 se lleva fatal con el DRI y la aceleración.
Sería mucho más útil si nos incluyeras la salida del glxinfo.
Yo he tenido que pasarme a las Mesa 6.5.1 + kernel 2.6.17-rcX para poder
utilizar la aceleración gráfica con Xorg, pero es por mi tarjeta gráfica, una
r300.
Reply to: