Como configurar pantala panorámica 1024x800
Tengo una Acer TravelMate 3210WXCi que viene con una pantalla panorámica de
1024x800 pero con xorg sólo la he podido configurar hasta 1024x786, existe
alguna forma de forzarlo, en el W$ que ella trae si toma la configuración.
$ lspci
0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller
(rev 04)
0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev
04)
Kernel 2.6.15.2
Parte del Log del XOrg
-----------------------------------
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor gen�rico"
(**) | |-->Device "Intel Corporation Intel Default Card"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.4.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G
(II) Primary Device is: PCI 00:02:0
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated
VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) I810(0): Chipset: "915GM"
(--) I810(0): Linear framebuffer at 0xA0000000
(--) I810(0): IO registers at addr 0xD0000000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): I830CheckAvailableMemory: 441340 kB available
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated
VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(==) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1219
(II) I810(0): Using new Pipe switch code
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present:
TRUE, size: (1280,800)
(II) I810(0): Size of device LFP (local flat panel) is 1280 x 800
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1280 x 800
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1280x800
(--) I810(0): Maximum space available for video modes: 12288 kByte
Mode: 30 (640x480)
Mode: 32 (800x600)
Mode: 34 (1024x768)
Mode: 38 (0x0)
Mode: 3a (0x0)
Mode: 3c (0x0)
Mode: 41 (640x480)
Mode: 43 (800x600)
Mode: 45 (1024x768)
Mode: 49 (0x0)
Mode: 4b (0x0)
Mode: 4d (0x0)
*Mode: 50 (640x480)
*Mode: 52 (800x600)
*Mode: 54 (1024x768)
.....
(WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync
ranges.
(II) I810(0): Monitor genérico: Using hsync range of 45.71-50.53 kHz
(II) I810(0): Monitor genérico: Using vrefresh value of 60.00 Hz
(II) I810(0): Not using mode "1024x800" (no mode of this name)
(II) I810(0): Not using mode "800x600" (no mode of this name)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(--) I810(0): Display dimensions: (300, 190) mm
(--) I810(0): DPI set to (86, 102)
Gracias por cualquier ayuda
Reply to: