[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: bonding en debian



Me parece que no tenes que configurarle ninguna direccion IP a las interfaces esclavas. Proba haciendo eso.
Otra cosa... sacale la linea "auto ethx" y despues contame.
Saludos
PD: Tambien deberias configurar el switch para que haga trunking con los puertos a los que esten conectadas las interfaces
Inactive hide details for Destinatarios: Lista de usuarios de debian <debian-user-spanish@lists.debian.org>Destinatarios: Lista de usuarios de debian <debian-user-spanish@lists.debian.org>

Destinatarios: Lista de usuarios de debian <debian-user-spanish@lists.debian.org>
CC:

Asunto: bonding en debian
Clasificación:


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Hola. Estoy configurando bonding en una debian. Compilé un núcleo 2.4.25 y
elegí bonding como módulo:

Hago modprobe bonding max_bonds=2 de modo que:

bender:/etc/network# lsmod
Module                  Size  Used by    Not tainted
bonding                44564   0

en /etc/network/interfaces tengo:

# The loopback interface
auto lo
iface lo inet loopback

#Network
auto bond0
iface bond0 inet static

auto eth0
iface eth0 inet static
auto eth1
iface eth1 inet static
después de hacer /etc/init.d/networking start hago

ifenslave bond0 eth0 eth1

levanta las dos interfaces eth0 y eth1 como esclavas y bond0 como maestra:

bond0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
inet addr:192.168.88.200  Bcast:192.168.88.255  Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


eth0      Link encap:Ethernet  HWaddr 00:06:5B:FE:0B:2E
inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
inet6 addr: fe80::206:5bff:fefe:b2e/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
RX packets:8299070 errors:0 dropped:0 overruns:0 frame:0
TX packets:8914463 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2956724211 (2.7 GiB)  TX bytes:7971488 (7.6 MiB)
Interrupt:28


eth1      Link encap:Ethernet  HWaddr 00:06:5B:FE:0B:2F
inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
inet6 addr: fe80::206:5bff:fefe:b2f/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
RX packets:1907 errors:0 dropped:0 overruns:0 frame:0
TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:224543 (219.2 KiB)  TX bytes:21647 (21.1 KiB)
Interrupt:29


lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:102168 errors:0 dropped:0 overruns:0 frame:0
TX packets:102168 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22952191 (21.8 MiB)  TX bytes:22952191 (21.8 MiB)


Desde la máquina con el bonding llego bien a todas partes, dentro y fuera de
mi red, el problema es cuando trato de acceder a esa máquina desde otras, ya
sean windows xp o linux, accedo, pero muy lentamente y desde los windozes
nada, ni siquiera puedo hacer un simple ping.

¿Sabéis qué es lo que he configurado mal, que parte del proceso es
incorrecta?...

- --

Einar Matveinen

Vitoð ér enn eða hvat
var der mere I ville vide
Vitoð ér enn eða hvat
vil I mere før jeg forsvinder
under solen

Rekisteröitynyt Linux käyttäjä nro 221083

Katso http://barrapunto.com/index.pl?section=mbp-einarmatveinen




-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see
http://www.gnupg.org

iD8DBQFAmM64WskLvsnDTo0RAi6ZAKDCEb4EUfmQkBVt+CBoF5SnLRDJzwCcD00v
T5b+6mmEJWuOhONORI+yvik=
=/BA9
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


http://www.telecom.com.ar



AVISO LEGAL:
Esta información es privada y confidencial y está dirigida únicamente a su destinatario. Si usted no es el destinatario original de este mensaje y por este medio pudo acceder a dicha información por favor elimine el mensaje. La distribución o copia de este mensaje está estrictamente prohibida. Esta comunicación es sólo para propósitos de información y no debe ser considerada como propuesta, aceptación ni como una declaración de voluntad oficial de TELECOM ARGENTINA STET - FRANCE TELECOM S.A. . La transmisión de e-mails no garantiza que el correo electrónico sea seguro o libre de error. Por consiguiente, no manifestamos que esta información sea completa o precisa. Toda información está sujeta a alterarse sin previo aviso.

This information is private and confidential and intended for the recipient only. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and shall not be regarded neither as a proposal, acceptance nor as a statement of will or official statement from TELECOM ARGENTINA STET - FRANCE TELECOM S.A. . Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice.
Reply to: