Re: Problema al compilar kernel
Os adjunto el archivo con las difencias entre los dmesg porque soy
incapaz de ver cuál es el error.
El 20/03/04 05:17:33, Victor Perez Pereira escribió:
Aurelio Díaz-Ufano wrote:
Hola lista:
He compilado el kernel 2.4.22 porque necesitaba un driver de una
webcam que no traia el 2.4.18-bf2.4 que tenía rulando. He usado el
archico config que tenia porque me daba miedo crear el kernel desde
cero.
No deberia de darte miedo Aurelio, algun dia deberas de realizarlo
y es bueno que empiezes a practicar desde ya.
El config que viene generado desde una instalaciòn de un linux es
no muy segura (por que viene con soportes para todos los modulos) y
la configuraciòn entre kernel's de diferentes versiones son
distintas.
Kernel-2.4.18 no trae las configuraciones identicas a un kernel-
2.4.19, por-que entonces: ¿para que serian las actualizaciones y
versiones nuevas de kernel's, aparte del soporte de modulos?, lo que
si son parecidas entre si.
el driver lo carga y arranca bien pero no tengo salida a Internet.
¿te muestra algun error?, ¿advertencia?
Saludos.
--
Víctor Pérez Pereira
SuSE Linux 9.0 - Kernel 2.6.0 User
Gentoo 1.4 - Kernel 2.4.23 User
e-mail: victordagrela@cantv.net
http://maracay.linux.org.ve
--
To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.
debian.org
1c1
< Linux version 2.4.22 (root@ShoSha) (gcc versión 3.3.3 (Debian 20040306)) #2 SMP vie mar 19 16:50:40 CET 2004
---
> Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
10d9
< 319MB LOWMEM available.
15d13
< Kernel command line: BOOT_IMAGE=Linux ro root=303
17a16
> Kernel command line: BOOT_IMAGE=LinuxOLD ro root=303
19c18
< Detected 501.139 MHz processor.
---
> Detected 501.149 MHz processor.
22,26c21,25
< Memory: 319648k/327616k available (2456k kernel code, 7580k reserved, 812k data, 188k init, 0k highmem)
< Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
< Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
< Mount cache hash table entries: 512 (order: 0, 4096 bytes)
< Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
---
> Memory: 319148k/327616k available (1783k kernel code, 8080k reserved, 549k data, 280k init, 0k highmem)
> Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
27a27
> CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
29a30
> CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
33a35
> CPU: Intel Pentium III (Katmai) stepping 03
36a39
> Checking for popad bug... OK.
38,47d40
< mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
< mtrr: detected mtrr type: Intel
< CPU: L1 I cache: 16K, L1 D cache: 16K
< CPU: L2 cache: 512K
< Intel machine check reporting enabled on CPU#0.
< CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
< CPU: Common caps: 0383fbff 00000000 00000000 00000000
< CPU0: Intel Pentium III (Katmai) stepping 03
< per-CPU timeslice cutoff: 1462.08 usecs.
< SMP motherboard not detected.
53,58c46,51
< ..... CPU clock speed is 501.1531 MHz.
< ..... host bus clock speed is 100.2305 MHz.
< cpu: 0, clocks: 1002305, slice: 501152
< CPU0<T0:1002304,T1:501152,D:0,S:501152,C:1002305>
< Waiting on wait_init_idle (map = 0x0)
< All processors have done init_idle
---
> ..... CPU clock speed is 501.1212 MHz.
> ..... host bus clock speed is 100.2240 MHz.
> cpu: 0, clocks: 1002240, slice: 501120
> CPU0<T0:1002240,T1:501120,D:0,S:501120,C:1002240>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
62c55
< PCI: Probing PCI hardware (bus 00)
---
> Unknown bridge resource 2: assuming transparent
69c62
< VFS: Disk quotas vdquot_6.5.1
---
> VFS: Diskquotas version dquot_6.4.0 initialized
80,81c73
< Floppy drive(s): fd0 is 1.44M
< FDC 0 is a post-1991 82077
---
> block: 128 slots per queue, batch=32
83,97c75
< loop: loaded (max 8 devices)
< Compaq SMART2 Driver (v 2.4.25)
< HP CISS Driver (v 2.4.47)
< pcnet32.c:v1.27a 10.02.2002 tsbogend@alpha.franken.de
< 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
< 8139cp: pci dev 00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
< 8139cp: Try the "8139too" driver instead.
< 8139too Fast Ethernet driver 0.9.26
< PCI: Found IRQ 5 for device 00:0b.0
< eth0: RealTek RTL8139 Fast Ethernet at 0xd481a000, 00:05:1c:15:a6:23, IRQ 5
< eth0: Identified 8139 chip type 'RTL-8139C'
< HDLC support module revision 1.11
< Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
< Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
< Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
---
> Uniform Multi-Platform E-IDE driver Revision: 6.31
99c77
< VP_IDE: IDE controller at PCI slot 00:07.1
---
> VP_IDE: IDE controller on PCI bus 00 dev 39
108d85
< blk: queue c04bcd00, I/O limit 4095Mb (mask 0xffffffff)
110,113c87,88
< hda: attached ide-disk driver.
< hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=1048/255/63, UDMA(66)
< hdb: attached ide-cdrom driver.
< hdb: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
---
> hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=1048/255/63
> hdb: ATAPI 48X CD-ROM drive, 128kB Cache
114a90
> ide-floppy driver 0.97.sv
116a93,110
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> Loading I2O Core - (c) Copyright 1999 Red Hat Software
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> loop: loaded (max 8 devices)
> Compaq CISS Driver (v 2.4.5)
> 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001)
> 8139cp: pci dev 00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
> 8139cp: Try the "8139too" driver instead.
> 8139too Fast Ethernet driver 0.9.24
> PCI: Found IRQ 5 for device 00:0b.0
> eth0: RealTek RTL8139 Fast Ethernet at 0xd481a000, 00:05:1c:15:a6:23, IRQ 5
> eth0: Identified 8139 chip type 'RTL-8139C'
> HDLC support module revision 1.02 for Linux 2.4
> Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
> Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
> ide-floppy driver 0.97.sv
118c112,113
< Highpoint HPT370 Softwareraid driver for linux version 0.02
---
> Highpoint HPT370 Softwareraid driver for linux version 0.01
> No raid array found
120c115
< Red Hat/Adaptec aacraid driver (1.1.2 Mar 19 2004 16:51:41)
---
> Red Hat/Adaptec aacraid driver, Apr 14 2002
122,131c117,120
< 3ware Storage Controller device driver for Linux v1.02.00.036.
< 3w-xxxx: No cards found.
< kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
< kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
< Linux Kernel Card Services 3.1.22
< options: [pci] [cardbus] [pm]
< I2O Core - (C) Copyright 1999 Red Hat Software
< I2O: Event thread created as pid 10
< I2O configuration manager v 0.04.
< (C) Copyright 1999 Red Hat Software
---
> 3ware Storage Controller device driver for Linux v1.02.00.016.
> 3w-xxxx: No cards with valid units found.
> request_module[scsi_hostadapter]: Root fs not mounted
> request_module[scsi_hostadapter]: Root fs not mounted
133c122
< chain_pool: 0 bytes @ c137b5a0
---
> chain_pool: 0 bytes @ c150fda0
135a125
> IP Protocols: ICMP, UDP, TCP, IGMP
139d128
< ds: no socket drivers loaded!
143c132
< Freeing unused kernel memory: 188k freed
---
> Freeing unused kernel memory: 280k freed
145c134
< EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
---
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
148c137
< usb-uhci.c: $Revision: 1.275 $ time 17:01:28 Mar 19 2004
---
> usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
156,158c145
< usb.c: registered new driver usbkbd
< usbkbd.c: :USB HID Boot Protocol keyboard driver
< hub.c: new USB device 00:07.2-2, assigned address 2
---
> hub.c: USB new device connect on bus1/2, assigned device number 2
159a147,148
> usb.c: registered new driver keyboard
> usbkbd.c: :USB HID Boot Protocol keyboard driver
163,164c152,153
< ov511.c: v1.63 for Linux 2.4 : ov511 USB Camera Driver
< es1371: version v0.32 time 12:18:10 Mar 19 2004
---
> ov511.c: v1.48a for Linux 2.4 : OV511 USB Camera Driver
> es1371: version v0.30 time 10:28:29 Apr 14 2002
169c158
< ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A)
---
> ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A)
174c163
< EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
---
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
177d165
< cdrom: This disc doesn't have any tracks I recognize!
Reply to: