Re: Problemas con Wireless
Has levantadoel interfaz wlan0?
Debes de ejecutar ifconfig wlan0 up dirección-de-red
o si estas conectando a un AP que de servicio por dhcp debes de usar
pump o dhcp-client.
El vie, 23-01-2004 a las 10:50, Vicente Lopez escribió:
> Hola, tengo el siguiente problema:
>
> 1 ZoomAir 4105 con adaptador PCI->PCMCIA
> 1 Debian Linux en un K6-500
>
> Cuando hago un "uname":
>
>
> code:
> ______________________________________________________________
> # uname --all
> Linux penelope 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i586 unknown
>
> ______________________________________________________________
>
>
> Cuando hago un "cardctl":
>
>
> code:
> ______________________________________________________________
> # cardctl ident
> Socket 0:
> product info: "ZoomAir 11Mbps High", "Rate wireless Networking", "", ""
> manfid: 0x0156, 0x0002
> function: 6 (network)
>
> ______________________________________________________________
>
>
> mi "iwconfig":
>
>
> code:
> ______________________________________________________________
> # iwconfig
> lo no wireless extensions.
>
> eth0 no wireless extensions.
>
> ______________________________________________________________
>
> que ocurre..., no tengo ni idea.
>
> en "mesage" en "/var/logs/"
> code:
> ______________________________________________________________
> Dec 22 13:02:30 penelope kernel: Linux PCMCIA Card Services 3.1.33
> Dec 22 13:02:30 penelope kernel: kernel build: 2.4.18-bf2.4 unknown
> Dec 22 13:02:30 penelope kernel: options: [pci] [cardbus] [apm]
> Dec 22 13:02:30 penelope kernel: Intel ISA/PCI/CardBus PCIC probe:
> Dec 22 13:02:30 penelope kernel: PCI: Enabling device 00:09.0 (0000 -> 0002)
> Dec 22 13:02:30 penelope kernel: PCI: Assigned IRQ 5 for device 00:09.0
> Dec 22 13:02:30 penelope kernel: TI 1410 rev 01 PCI-to-CardBus at slot 00:09, mem 0x10000000
> Dec 22 13:02:30 penelope kernel: host opts [0]: [serial pci & irq] [pci irq 5] [lat 168/176] [bus 2/5]
> Dec 22 13:02:30 penelope kernel: PCI irq 5 test failed
> Dec 22 13:02:30 penelope kernel: ISA irqs (scanned) = none!<6> *NO* card interrupts, polling interval = 1000 ms
> Dec 22 13:02:31 penelope kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x378-0x37f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0298-0x0377: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0380-0x03bf: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x03e0-0x047f: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0490-0x04cf: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x04d8-0x04ff: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0800-0x08ff: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0c00-0x0cff: clean.
> Dec 22 13:02:31 penelope kernel: orinoco_cs: RequestIRQ: Resource in use
>
> ______________________________________________________________
>
>
> que quiere decir esto????
>
> que puedo hacer.
> muchas gracias...
>
> Vicente Lopez Solis
> Instalaciones Solis Muñoz SL
>
--
Reply to: