Re: Al compilar kernel no van las x
mas vale posteá la config del kernel que compiló.
On Sat, Oct 25, 2003 at 09:02:15PM +0200, SoTaNeZ wrote:
> Un amigo ha instalado debian woody con el kernel 2.20 de serie xD y las x le van estupendamente, pero al compilar las sources del 2.20 o el 2.6.0-test5 pues no se inicia nada.
>
> Esto es lo que sale en el log del kdm y del Xfree (en los dos igual):
>
> ----------------------------------------------------------------------
> warning: process set to nice value 0 instead of -10 as requested
> _XSERVTransSocketOpen: socket() failed for local
> _XSERVTransSocketOpenCOTSServer: Unable to open socket for local
> _XSERVTransOpen: transport open failed for local/(none):0
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for local
>
> Fatal server error:
> Cannot establish any listening sockets - Make sure an X server isn't already running
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
> --------------------------------------------------------------------
>
> Esto es la configuracion del xfree:
>
> --------------------------------------------------------------------
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # If you want your changes to this file preserved by dexconf, only make changes
> # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> # "### END DEBCONF SECTION" line below.
> #
> # To change things within the debconf section, run the command:
> # dpkg-reconfigure xserver-xfree86
> # as root. Also see "How do I add custom sections to a dexconf-generated
> # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
>
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> # Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> # Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "es"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/ttyS0"
> Option "Protocol" "Auto"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "s3virge"
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 28-96
> VertRefresh 50-76
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "Generic Monitor"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> #Section "DRI"
> #Mode 0666
> #EndSection
>
> ### END DEBCONF SECTION
> -----------------------------------------------------------------------
> Y esto es un dmesg por si acaso:
>
> ------------------------------------------------------------------------
> Linux version 2.6.0-test5 (root@(none)) (gcc version 2.95.4 20011002 (Debian prerelease)) #10 Sat Oct 25 13:57:00 CEST 2003
> Video mode to be used for restore is ffff
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 48MB LOWMEM available.
> On node 0 totalpages: 12288
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 8192 pages, LIFO batch:2
> HighMem zone: 0 pages, LIFO batch:1
> DMI not present.
> Building zonelist for node : 0
> Kernel command line: BOOT_IMAGE=Linux ro root=341
> Initializing CPU#0
> PID hash table entries: 256 (order 8: 2048 bytes)
> Detected 166.413 MHz processor.
> Console: colour VGA+ 80x25
> Memory: 46320k/49152k available (1058k kernel code, 2376k reserved, 434k data, 272k init, 0k highmem)
> Calibrating delay loop... 326.65 BogoMIPS
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> -> /dev
> -> /dev/console
> -> /root
> CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000
> CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000
> Intel Pentium with F0 0F bug - workaround enabled.
> CPU: After all inits, caps: 008001bf 00000000 00000000 00000000
> CPU: Intel Pentium MMX stepping 04
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> Linux NoNET1.0 for Linux 2.6
> PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=0
> PCI: Using configuration type 1
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
> PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
> SCSI subsystem initialized
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> pty: 256 Unix98 ptys configured
> udf: registering filesystem
> Activating ISA DMA hang workarounds.
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> parport0: PC-style at 0x378 [PCSPP,TRISTATE]
> parport0: cpp_mux: aa55f00f52ad51(87)
> parport0: cpp_daisy: aa5500ff(80)
> parport0: assign_addrs: aa5500ff(80)
> parport0: cpp_mux: aa55f00f52ad51(87)
> parport0: cpp_daisy: aa5500ff(80)
> parport0: assign_addrs: aa5500ff(80)
> Using anticipatory scheduling io scheduler
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is an 8272A
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hda: ST52520A, ATA DISK drive
> hdb: SAMSUNG SV0682D, ATA DISK drive
> hdc: CD-ROM 50X L, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 5009760 sectors (2564 MB) w/112KiB Cache, CHS=4970/16/63
> hda: hda1
> hdb: max request size: 128KiB
> hdb: 13381200 sectors (6851 MB) w/480KiB Cache, CHS=14160/15/63
> hdb: hdb1 hdb2 < hdb5 hdb6 >
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: E-IDE Model: CD-ROM 50X L Rev: 11
> Type: CD-ROM ANSI SCSI revision: 02
> sr0: scsi3-mmc drive: 4x/50x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.12
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
> mice: PS/2 mouse device common for all mice
> input: PC Speaker
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: AT Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1
> es1370: version v0.38 time 19:30:03 Oct 21 2003
> es1371: version v0.32 time 19:30:21 Oct 21 2003
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 272k freed
> Adding 489940k swap on /dev/hdb5. Priority:-1 extents:1
> -----------------------------------------------------------------------
> A ver si me pueden decir que pasa. Gracias y un saludo.
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
Fernando M. Maresca
Reply to: