Mensajes en el arranque y placa de red
Tengo un athlon XP con una mother ASUS A7N266-VM, sucede que no me toma la
placa de red onboard. En el arranque me aparecen estos mensajes sospechosos:
"...AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround..."
"...spurious 8259A interrupt: IRQ7..."
Este es el dmesg completo, y a continuación agrego el /proc/interrupts:
Linux version 2.4.22-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian
prerelease)) #1 SMP Fr Sep 19 17:55:45 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dfec000 (usable)
BIOS-e820: 000000000dfec000 - 000000000dfef000 (ACPI data)
BIOS-e820: 000000000dfef000 - 000000000dfff000 (reserved)
BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
On node 0 totalpages: 57324
zone(0): 4096 pages.
zone(1): 53228 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=308 hda=scsi hdb=scsi
hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 1536.832 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3067.08 BogoMIPS
Memory: 223524k/229296k available (1262k kernel code, 5260k reserved, 534k
data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Athlon(TM) XP 1800+ stepping 01
per-CPU timeslice cutoff: 731.42 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1536.8422 MHz.
..... host bus clock speed is 267.2768 MHz.
cpu: 0, clocks: 2672768, slice: 1336384
CPU0<T0:2672768,T1:1336384,D:0,S:1336384,C:2672768>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf1b20, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/01b2] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xf0000000, mapped to 0xce80d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:bf60
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE: IDE controller at PCI slot 00:09.0
NFORCE: chipset revision 195
NFORCE: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: nVidia Corporation nForce IDE (rev c3) UDMA100 controller on
pci00:09.0
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E030L0, ATA DISK drive
hdc: SAMSUNG CD-R/RW SW-240B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
hdc: attached ide-scsi driver.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15
hda16 hda17 >
ide: late registration of driver.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.02
Guestimating sector 60057631 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array
found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CD-R/RW SW-240B Rev: R403
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 143k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
Adding Swap: 329292k swap-space (priority -1)
Adding Swap: 128484k swap-space (priority -2)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
spurious 8259A interrupt: IRQ7.
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xceb82000, IRQ 10
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:03.0 to 64
usb-ohci.c: USB OHCI at membase 0xceb84000, IRQ 10
usb-ohci.c: usb-00:03.0, nVidia Corporation nForce USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xceb9e000, 00:e0:7d:ed:f5:a1, IRQ 6
eth0: Identified 8139 chip type 'RTL-8139C'
Intel 810 + AC97 Audio, version 0.24, 18:08:21 Sep 19 2003
PCI: Enabling device 00:06.0 (0005 -> 0007)
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xe000 and 0xe100, MEM 0x0000 and
0x0000, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 176M
agpgart: Detected NVIDIA nForce chipset
agpgart: AGP aperture is 64M @ 0xf8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,11), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
blk: queue c0334960, I/O limit 4095Mb (mask 0xffffffff)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: Printer, EPSON Stylus COLOR 400
lp0: using parport0 (polling).
lp0: console ready
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
---------
cat /proc/interrupts
CPU0
0: 64261 XT-PIC timer
1: 1499 XT-PIC keyboard
2: 0 XT-PIC cascade
6: 9932 XT-PIC eth0
8: 1 XT-PIC rtc
10: 0 XT-PIC usb-ohci, usb-ohci
11: 0 XT-PIC NVIDIA nForce Audio
12: 30676 XT-PIC PS/2 Mouse
14: 18940 XT-PIC ide0
15: 8 XT-PIC ide1
NMI: 0
LOC: 64226
ERR: 10
MIS: 0
Agradezco de antemano...
Sergio
Reply to: