Re: mplayer

[Darwin Betancourt <drw@pupilabox.net.ec>]

Saludos

He tratado de instalar mi mplayer con las opciones que se detallan aqui 
abajo

./configure --enable-gui --enable-vorbis --enable-aa

pero me tira el siguiente error

   Error: X11 support required for GUI compilation

lo compile en primer instancia con ./configure se podria decir que se 
instalo bien, pero al momento de hacer correr un video no me muestra 
imagen solo el audio

adjunto el archivo en donde se describe algunas de las salidas que 
presenta al momento de ejecutar un video

Gracias !!

Arturo Camacho wrote:

> Hola a todos, acabo de instalar debian wen dos maquinas casi iguales
> athlon xp 2.1 512mb ddr t.m.asus. y resulta que en una compilo e instalo
> mplayer y no hay ningun problema pero cuando en la otra maquina hago lo
> mismo los mpeg se ven lentos o se traban y los divx se ven bien en las
> dos maquinas alguna sugerencia y asi es como lo instalo
>  
> ./configure --enable-gui --enable-vorbis --enable-aa
> --with-win32libdir=/usr/local/win32codecs/ --enable-largefiles
> --enable-smb --enable-dynamic-plugins
> --with-xanimlibdir=/usr/local/xanimdlls/
> --with-reallibdir=/usr/local/rp9codecs/ --enable-arts --enable-sdl
> --enable-runtime-cpudetection --enable-libdv 
> make
> make install
>
>
>
> saludos
>
> a todos
>
>
>  

--
  O
 |\_
 |-|\
 Darwin Betancourt Castillo (drw@pupilabox.net.ec)
 User Linux #286294 counter.li.org	
 http://www.pupilabox.net.ec
 "Soluciones informáticas a la medida - OpenSource"

       


MPlayer 0.91-2.95.4  (C) 2000-2003 MPlayer Team
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 6)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.confReading config file /home/darwin/.mplayer/config
Reading /home/darwin/.mplayer/codecs.conf: Reading /usr/local/etc/mplayer/codecs.conf: Using built-in default codecs.conf
font: can't open file: /home/darwin/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using usleep() timing

Playing Revolution.OS.2001.DVDRip.XviD-RETRO.avi
AVI file format detected.
VIDEO:  [XVID]  512x384  16bpp  29,97 fps  1023,5 kbps (124,9 kbyte/s)
Clip info:
 Software: Nandub v1.0rc2
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 4000->192000 (32,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
fbdev: Can't open /dev/fb0: Permiso denegado
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [null] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
This file was encoded with XviD build 3
VDec: vo config request - 512 x 384 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO: [null] 512x384 => 512x384 Planar YV12
A:   0,3 V:   0,0 A-V:  0,318 ct:  0,000    1/  1   0%  0%  0,0% 0 0 0%
A:   0,4 V:   0,0 A-V:  0,384 ct:  0,003    2/  2   0%  0%  0,0% 1 0 0%
Exiting... (End of file)
 Your system is too SLOW to play this

 Posible reasons, problems workarounds:
 - Most common: broken/buggy _audio_ driver
 - Slow video output
 - Slow CPU
 - Broken CPU
 - Broken file
 - Slow Media (NFS/SMB mount, DVD, VCD etc)
 Read DOCS/video.html and DOCS/sound.html for tuning/speedup tips
 If none of this helps you, read DOCS/bugreports.html.