Re: [X-Window] Error en la configuración
Hola. En google he encontrado esto, que a lo mejor puede servirte:
http://lists.debian.org/debian-user-portuguese/2001/debian-user-portuguese-200101/msg00059.html
Está en italiano, pero más o menos se entiende.
Viene a decir que escribas "modprobe agpgart", lo instales y resintales
Xfree. Yo supongo que no haga falta llegar tan lejos y vaste con un
dpkg-reconfigure xserver-xfree86
Saludos y suerte.
El mar, 12-11-2002 a las 09:23, Javier Mora escribió:
> Hola a todos:
>
> Estoy configurando X-Window (sobre Woody) en una máquina de la
> oficina. En aquella la tarjeta gráfica es una Intel 810 integrada en placa
> base. He usado como herramienta de configuración el script "xf86config" y,
> si no me equivoco, creo que he configurado correctamente el servidor y las
> frecuencias del vídeo. El caso es que por más que la reviso no consigo dar
> con el problema que me impide arrancar las X.
> Seguidamente os muestro una porción de XFree86.0.log
> ...
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) I810(0): initializing int10
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE Version 2.0
> (II) I810(0): VESA VBE Total Mem: 1024 kB
> (II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS
> (II) I810(0): VESA VBE OEM Software Rev: 3.1
> (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
> (II) I810(0): VESA VBE OEM Product: i810 Graphics Controller
> (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) I810(0): VESA VBE DDC supported
> (II) I810(0): VESA VBE DDC Level 2
> (II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
> (II) I810(0): VESA VBE DDC read successfully
> (II) I810(0): Manufacturer: PHL Model: b15c Serial#: 105265
> (II) I810(0): Year: 1999 Week: 20
> (II) I810(0): EDID Version: 1.1
> (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) I810(0): Sync: Separate
> (II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
> (II) I810(0): Gamma: 2.10
> (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) I810(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
> (II) I810(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
> (II) I810(0): Supported VESA Video Modes:
> (II) I810(0): 720x400@70Hz
> (II) I810(0): 640x480@60Hz
> (II) I810(0): 640x480@75Hz
> (II) I810(0): 800x600@60Hz
> (II) I810(0): 800x600@75Hz
> (II) I810(0): 1024x768@60Hz
> (II) I810(0): 1024x768@75Hz
> (II) I810(0): Manufacturer's mask: 0
> (II) I810(0): Supported Future Video Modes:
> (II) I810(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) I810(0): #1: hsize: 640 vsize 480 refresh: 70 vid: 18993
> (II) I810(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
> (II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
> h_border: 0
> (II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
> v_border: 0
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
> (II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
> h_border: 0
> (II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
> v_border: 0
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
> (II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
> h_border: 0
> (II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
> v_border: 0
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
> (II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
> h_border: 0
> (II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
> v_border: 0
> (--) I810(0): Chipset: "i810e"
> (--) I810(0): Linear framebuffer at 0xD0000000
> (--) I810(0): IO registers at addr 0xD4100000
> (EE) Unable to open /dev/agpgart (No such device)
> (==) I810(0): Will alloc AGP framebuffer: 8192 kByte
> (==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) I810(0): My Monitor: Using hsync range of 31.00-60.00 kHz
> (II) I810(0): My Monitor: Using vrefresh range of 59.00-85.00 Hz
> (II) I810(0): Clock range: 12.00 to 203.00 MHz
> (II) I810(0): Not using default mode "800x600" (vrefresh out of range)
> (II) I810(0): Not using default mode "1024x768" (unknown reason)
> (II) I810(0): Not using default mode "1024x768" (hsync out of range)
> (II) I810(0): Not using default mode "1152x864" (hsync out of range)
> (II) I810(0): Not using default mode "1280x960" (hsync out of range)
> (II) I810(0): Not using default mode "1280x1024" (hsync out of range)
> (II) I810(0): Not using default mode "1280x1024" (hsync out of range)
> (II) I810(0): Not using default mode "1280x1024" (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1792x1344" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1792x1344" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1856x1392" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1856x1392" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1400x1050" (hsync out of range)
> (II) I810(0): Not using default mode "1400x1050" (hsync out of range)
> (--) I810(0): Virtual size is 800x600 (pitch 1024)
> (**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631
> +hsync +vsync
> (**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
> -hsync -vsync
> (++) I810(0): DPI set to (100, 100)
> ...
> Fatal server error:
> AddScreen/ScreenInit failed for driver 0
> ...
>
> Me llama la atención este error:
>
> (EE) Unable to open /dev/agpgart (No such device)
>
> pero no se que quiere decir con ello. El dispositivo existe y tiene los
> permisos para "root" adecuados (estoy configurando como root).
>
> Lo cierto es que llevo ya tres días con ello y estoy en punto muerto,
> ¿alguien me puede proporcionar alguna pista para solucionar esto? Nunca
> había tenido tantos problemas para configurar las X en una máquina.
>
>
> Un saludo y gracias por la ayuda,
>
> Javier Mora García mailto:jmora@dialsur.es
> Dialsur S.A. http://www.dialsur.es
> Departamento de Informática
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: