Re: SIS 620

[Daniel Blas Jiménez <dani.blas@iespana.es>]

Mi problema era el mismo se solucionó con xfree 4.2
salu2,

Dani.

El vie, 14-06-2002 a las 20:18, Ariel M. Jolodovsky escribió:
> Hola;
> me instalé woody y trate de configurar (xf86config mediante) mi placa de
> video (sis620).
> 
> Cuando puse el numero de mi placa en el xf86config me detecto
> automaticamente que usaba el server sis; pero cuando termine de
> cofigurarla y puse startx me devolvio:
> 
> woody:~# startx
> 
> warning: process set to nice value 0 instead of -10 as requested
> 
> XFree86 Version 3.3.6a / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: xx November 2000
>         If the server is older than 6-12 months, or if your card is
> newer
>         than the above date, look for a newer version before reporting
>         problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.4.13 i686 [ELF]
> Configured drivers:
>   SVGA: server for SVGA graphics adaptors (Patchlevel 1):
>       NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
>       RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
>       GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
>       GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
>       Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
>       ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
>       ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
>       wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
> ati,
>       sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
>       sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
> tvga8200lx,
>       tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
>       tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
> tgui9420dgi,
>       tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
>       tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
>       cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
> cyberblade,
>       clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
> clgd5430,
>       clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
> clgd5465,
>       clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
> clgd7543,
>       clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
> mga2064w,
>       mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
> oti067,
>       oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
> ali2308,
>       ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
> ark1000pv,
>       ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
> AT24,
>       AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
>       ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
>       ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
>       ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
> i740_pci,
>       Voodoo Banshee, Voodoo3, smi, generic
> (using VT number 7)
> 
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (--) no ModulePath specified using default: /usr/X11R6/lib/modules
> dbe: Unknown error loading module
> 
> Config Error: /etc/X11/XF86Config:48
> 
>     SubSection  "extmod"
>     ^^^^^^^^^^^
> Module section keyword expected
> giving up.
> xinit:  Connection refused (errno 111):  unable to connect to X server
> xinit:  No such process (errno 3):  Server error.
> woody:~#
> 
> Alguna idea????
> 
> Actualmente estoy usando potato r4 con 256 colores (X 3.3.6).
> 
> Desde ya muchas gracias
> JoloX
> 
> P.D:No se xq al principio dice q es xfree 3.3.6 y que mi kernel es
> 2.4.13... se supone que son las X 4.1.0 y el kernel es 2.2.19
> 
> 



______________________________________________________________________________
mensaje enviado desde http://www.iespana.es
emails (pop)-paginas web (espacio ilimitado)-agenda-favoritos (bookmarks)-foros -Chat


--
To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org