Re: ADSL en mi pc
Hay un paquete que se llama pppoeconf es un script de consola que te pregunta
el usuario clave y esas cosas y te configura la conexion y despues se te
conecta automaticamente cuando arranca la maquina.
Saludos.
El Vie 01 Mar 2002 22:11, jorge carlos escribió:
> disculpen si lo mande varias veces, es que no llegaba.
>
>
> Hola aquí me tienen de nuevo molestando con mis
> preguntas, esta vez escribi un mail de consulta mas
> preciso, debido a que en los anteriores no lo he sido.
> Resulta que tengo un servicio de conexión a la
> internet mediante ADSL (la cual no logre hacerla
> funcionar en el Debian), brindado por ADVANCE, que
> pertenece a TELEFONICA DE ARGENTINA (esos que nos
> mandan las boletas de color verde que tanto nos hacen
> doler los bolsillos y mas de una vez la cabeza, pero
> ese es otro tema, jeje) bueno es servicio es
> denominado SPEEDY con una velocidad de 256kbps (por el
> momento mas que suficiente para mi), me conecto
> mediante un router ARESCOM que se conecta a una placa
> de red REALTEK 8139 por medio de RJ-45 y bueno en
> windoze la conexión funciona bajo PPPoE, en el Debian
> tambien funciona bajos los mismos conceptos, según me
> dieron a entender en mails anteriores.
> Por lo cual instale el paquete que se encuentra en el
> cd2 de la distro 2.2 r5, el mismo si mal no recuerdo
> se llama pppoe_1.0-1.deb, el cual lo copie al rigido
> y lo inastale con el comando `dpkg ?i pppoe_1.0-1.deb´
> en el directorio donde se encontraba situado, (vale la
> pena aclararlo porque no todos lo que esten leyendo
> este mail son usuarios expertos o avanzados, en mi
> caso soy bastante pricipiante, y se nota bastante)
> Bueno luego de hacer eso tube que cargar los modulos
> de la placa de red que son rtl8139 que eso se
> configura con `modconf´ en la parte de network o net
> bien no recuerdo, paro tambien ahí active que cargue
> el modulo ppp en el kernel, asi cuando bootea los
> carga.
> Bueno espero que me puedan dar una mano asi puedo
> salir al mundo con el Debian y lo mas impotanrte
> espero que las respuestas que le den a este mail les
> sirva a todos los demas que se encuentran con el mismo
> problema que yo.
>
> -- -- -- -- -- --
> readme.deibian situado en /usr/share/doc/pppoe
> -- -- -- --
>
>
> How to setup your DSL PPPoE connection
>
> Do the following steps as root:
>
> 1. Edit the file pap-secrets file, adding a line to
> the outbound
> connections sections that has the following format:
>
> username@sympatico.ca sympatico.ca password
>
> Replace 'username' by the username your DSL provider
> gave you and 'password'
> by your password. This assumes that your provider is
> Sympatico. If it is
> not, you will also need to replace 'sympatico.ca' by
> the address of your
> provider.
>
> 2. Edit the file /etc/ppp/peers/dsl-provider, adding a
> line that reads:
>
> user username@sympatico.ca
>
> where what follows 'user' is identical to the first
> part of the line you
> added to pap-secrets (here 'username@sympatico.ca').
>
> 3. Edit the file /etc/init.d/network, adding a line
> that says:
>
> ifconfig eth0 up
>
> 4. Edit the file /etc/init.d/ppp. Find the line in the
> 'start' section that
> starts pppd and replace the word 'provider' by
> 'dsl-provider'. That line
> should now look like:
>
> start-stop-daemon --start --quiet --exec
> /usr/sbin/pppd -- call dsl-provider
>
> 5. Create an empty file /etc/ppp/ppp_on_boot by
> running the command "touch
> /etc/ppp/ppp_on_boot".
>
> Your DSL PPPoE connection is now set up. To start it,
> execute
> "/etc/init.d/ppp start". The connection will come up
> automatically the next
> time you boot.
>
>
>
>
>
>
> Bueno entonces voy a /etc/ppp/, para editar
> pap-secrets, y queda de esta manera:
>
>
> ------ ------- ---
> -> pap-secrets
> ----- --- ------ -
> #
> # /etc/ppp/pap-secrets
> #
> # This is a pap-secrets file to be used with the
> AUTO_PPP function of
> # mgetty. mgetty-0.99 is preconfigured to startup pppd
> with the login option
> # which will cause pppd to consult /etc/passwd (and
> /etc/shadow in turn)
> # after a user has passed this file. Don't be
> disturbed therfore by the fact
> # that this file defines logins with any password for
> users. /etc/passwd
> # (again, /etc/shadow, too) will catch passwd
> mismatches.
> #
> # This file should block ALL users that should not be
> able to do AUTO_PPP.
> # AUTO_PPP bypasses the usual login program so its
> necessary to list all
> # system userids with regular passwords here.
> #
> # ATTENTION: The definitions here can allow users to
> login without a
> # password if you don't use the login option of pppd!
> The mgetty Debian
> # package already provides this option; make sure you
> don't change that.
>
> # INBOUND connections
>
> # Every regular user can use PPP and has to use
> passwords from /etc/passwd
> * alpha "" *
>
> # UserIDs that cannot use PPP at all. Check your
> /etc/passwd and add any
> # other accounts that should not be able to use pppd!
> guest alpha "*" -
> master alpha "*" -
> root alpha "*" -
> support alpha "*" -
> stats alpha "*" -
>
> # OUTBOUND connections
>
> # Here you should add your userid password to connect
> to your providers via
> # PAP. The * means that the password is to be used for
> ANY host you connect
> # to. Thus you do not have to worry about the foreign
> machine name. Just
> # replace password with your password.
> # If you have different providers with different
> passwords then you better
> # remove the following line.
>
> jorge@speedy * 46360772
>
>
>
> ------- ----
>
> para contunuar pide que editemos
> /etc/ppp/peers/dsl-provider, agregando una linea que
> se asemeje a esta:
>
> user username@sympatico.ca
>
> claro, pero con el nombre de usuario que nos
> correponde. En mi caso el archivo quedo de la
> siguiente manera:
>
>
> --------- -------- -----
> -> /etc/ppp/peers/dsl-provider
> ---- ---- ---- ---- ---
> pty "pppoe -I eth0 -T 80"
> noipdefault
> defaultroute
> hide-password
> lcp-echo-interval 20
> lcp-echo-failure 3
> mtu 1492
> mru 2400
> noauth
> persist
> user jorge@speedy
> --- ---- ---- ----- --
>
>
> Para seguir configurnadolo, pide que editemos
> /etc/init.d/network agregandole una linea que comente
> lo siguiente:
>
>
> ifconfig eth0 up
>
> Bueno al no existir este archivo en el directorio
> indicado en el readme.debian, lo tube que crear (bueno
> en realidad hay uno llamado netwoking, por lo cual me
> pone en duda si ahí es donde debo comentar la linea),
> pero como en el readme dice bien claro
> ?/etc/init.d/network? asi que que lo creo y le escrivo
> dentro de el
> La linea ?ifconfig eth0 up?.
> Bueno la duda que me surje es si ¿tengo que ejecutar
> `chmod ?x network´?.
>
>
>
> Bueno para seguir configurandolo nos dice que editemos
> /etc/init.d/ppp pidiendo que busquemos la linea
> 'start' y que reemplacemos donde dice 'provider' por
> 'dsl-provider'
> Y que nuestro archivo va a lucir similar a esto:
> start-stop-daemon --start --quiet --exec
> /usr/sbin/pppd -- call dsl-provider
>
> y aqui tienen como es mi archivo
>
>
> --- --- --- --- -- -
> ->/etc/init.d/ppp
> --- - -- - - -- ---
>
> #!/bin/sh
> #
> # /etc/init.d/ppp: start or stop PPP link.
> #
> # If you want PPP started on boot time (most dialup
> systems won't need it)
> # rename the /etc/ppp/no_ppp_on_boot file to
> /etc/ppp/ppp_on_boot, and
> # follow the instructions in the comments in that
> file.
>
> PATH=/bin:/sbin:/usr/bin:/usr/sbin
> test -x /usr/sbin/pppd -a -f /etc/ppp/ppp_on_boot ||
> exit 0
> if [ -x /etc/ppp/ppp_on_boot ]; then RUNFILE=1; fi
>
> case "$1" in
> start)
> echo -n "Starting up PPP link: pppd"
> if [ "$RUNFILE" = "1" ]; then
> /etc/ppp/ppp_on_boot
> else
> pppd call dsl-provider
> fi
> echo "."
> ;;
> stop)
> echo -n "Shutting down PPP link: pppd"
> if [ "$RUNFILE" = "1" ]; then
> poff
> else
> poff dsl-provider
> fi
> echo "."
> ;;
> restart|force-reload)
> poff -r
> ;;
> *)
> echo "Usage: /etc/init.d/ppp
> {start|stop|restart|force-reload}"
> exit 1
> ;;
> esac
>
> exit 0
>
> ---- --- --- --- --- --- - - - - -- --- - - -
> **me pregunto si ¿asi esta bien configurado? (en caso
> de estar mal agradeceria que me indiquen donde.
> --- --- -- -- - -- - -- - - -- - -- - - - - - -
>
>
> luego para continuar nos dice que creemos un archivo
> vacio en /etc/ppp/ppp_on_boot, el cual lo creo y lo
> dejo ahi vacio como lo indica.
>
>
> Y si esta todo bien ejecutando "/etc/init.d/ppp
> start". La conexión tendria que funcionar, y cuando al
> rebootear se abrira la interfaz automáticamente, asi
> se supone.
> Bueno les comento que luego de hacer todo esto, al
> ejecutar `ifconfig´ la unica interna que muestra
> abierta es ?lo? mientras que si estubiese funcionando
> como corresponde tendria que estar abirtas ?eth0?y
> ?ppp0?
> Bueno al menos eso supongo, y hasta aquí han llegado
> mis escasos conocimientos en el tema. Ahora estaria
> muy agradecido si alguien que actualmente este
> conectado mediante ADSL, y lógicamente tenga un
> servicio similar al mio como he descripto en los
> encabezados de este e-mail, estaria muy agradecido si
> se toma la molestia de comparar sus archivos de
> confguracion con los mios que he incluido en este
> mail.
>
> Bueno me voy despidiendo
> Abrazos para todos, y grcias por contestar mails
> anteriores.
>
>
>
>
>
>
>
>
>
> Conectate a Internet GRATIS con Yahoo! Conexión:
> http://conexion.yahoo.com.ar
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>
>
Reply to: