RE: Presentación y consulta
Bueno, evidentemente tenés experiencia "interpretando" las necesidades
de los miembros de la lista.
Te cuento que el problema por el que hice la consulta ya está
solucionado pero no así el que adivinaste.
Las X continúan sin funcionar
Me dicen que no pueden encontrar el font por default (fixed). Al pie te
paso toda la lista de los mensajes que me genera.
Hice un apt-cache search fixed | grep font
Sin resultados, hacienda otras búsquedas instale unos cuantos entre los
que instale los xfonts-75dpi y xfonts-100dpi que probablemente sean los
referidos aunque llamados por su tamaño.
Así fui instalando todos los paquetes de fonts, los únicos que no pude
encontrar son los cyrilic.
Si se te ocurre (o a cualquier otro) cuál puede ser el problema voy a
estar muy agradecido.
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is
newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Trident 9880"
(**) SVGA: Monitor ID: "Samsung Syncmaster 500s"
(--) SVGA: Mode "640x350" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "720x400" needs vert refresh rate of 85.04 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) SVGA: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) SVGA: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) SVGA: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) SVGA: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) SVGA: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) SVGA: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,
/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11
/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(--) SVGA: PCI: Trident TGUI 96xx rev 211, Memory @ 0xff400000, MMIO @
0xffbe0000
(--) Trident chipset version: 0xd3 (TGUI96xx)
(--) SVGA: BIOS reports Clock Control Bits 0x0
(--) SVGA: Detected a Trident 9680.
(--) SVGA: Revision 1.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: tgui9680
(**) SVGA: videoram: 1024k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(--) SVGA: There is no mode definition named "1152x864"
(--) SVGA: Removing mode "1152x864" from list of valid modes.
(**) SVGA: Mode "1024x768": mode clock = 65.000
(--) SVGA: Insufficient video memory for all resolutions
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(**) SVGA: Mode "800x600": mode clock = 49.500
(**) SVGA: Mode "640x480": mode clock = 31.500
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0ff400000, Size 1MB
_FontTransSocketUNIXConnect: Can't connect: errno = 111
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
-----Mensaje original-----
De: javi@smtp.paulucci.com.ar [mailto:javi@smtp.paulucci.com.ar] En
nombre de Javi Castelo
Enviado el: Miércoles, 26 de Diciembre de 2001 04:55 p.m.
Para: debian-user-spanish@lists.debian.org
CC: debian-user-spanish@lists.debian.org
Asunto: Re: Presentación y consulta
Fernando Barcelo escribió:
> ----- Forwarded message from Fernando Barcelo <fbarcelo2@yahoo.com>
-----
>
> From: "Fernando Barcelo" <fbarcelo2@yahoo.com>
> To: "Amaya" <amaya@debian.org>
> Subject: Presentación y consulta
> Date: Wed, 26 Dec 2001 13:58:48 -0300
> X-Mailer: Microsoft Outlook Express 5.50.4522.1200
>
> Antes que nada me presento, Trabajo en la administración de los
sistemas
> de Playcenter (una empresa de parques de juegos electrónicos y
> electromecánicos).
>
> En la empresa se utilizan servidores Novell, NT y a partir de que yo
> entré en la misma, obviamente Debian GNU/Linux.
> Poco a poco voy migrando todo a Linux.
> Sin embargo soy bastante nuevito en Linux tengo solo unos 8 meses de
> experiencia pero al contrario de lo que se dice me resultó súmamente
> fácil de aprender, las cosas funcionan de un modo muy lógico y
> transparente y la documentación es abundante y clara.
> Hace unos 3 meses que estoy participando en la lista de Lugar (Linux
> User Group de Argentina) y ahora decidí unirme a una lista más
> específica de Debian.
>
> Para debutar y como no podía ser de otra forma les tiro una consulta,
> por requerimiento de un soft, tuve que actualizar las locales, lo hice
> con apt-get y todo funciona perfectamente, sin embargo ahora cada vez
> que las tiene que usar recibo el siguiente mensaje (Este salió al
> instalar xserver)
>
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = "es_ES",
> LANG = "es_ES"
> are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
>
> Setting up xserver-common-v3 (3.3.6-41) ...
>
> Setting up xserver-svga (3.3.6-41) ...
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = "es_ES",
> LANG = "es_ES"
> are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
>
> ¿Alguien sabe como solucionarlo?
A ver si se te arregla con este par de "movimientos" ...
que me los voy a grabar en la frente, como root haces:
1) dpkg-reconfigure locales
y eliges es_ES ISO-....
2) dpkg-reconfigure console-data
y eliges "Select keymap from arch list" ---> Qwerty --->
---> Spanish ---> Standard ---> Standard.
Haz un logout y vuelve a entrar, prueba ahora ha instalar un paquete.
Y como esto ya me suena de más de una vez, y veo por donde van los tiros
te adelanto que para las Xs versión 4 pruebes con:
3) dpkg-reconfigure xserver-xfree86
Procura tener a mano la documentación del hardware de video (tarjeta,
monitor, etc).
A ese trinomio lo voy a bautizar con el nombre:
"Los tres mandamientos DPKG-RECONFIGURE de Potato a Woody"
--
Javi Castelo
Corriendo Debian GNU/Linux Woody ....
y perpetutuo estado de aprendizaje
--
To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: