Problemas con la Avermedia TVCapture98
Me acabo de agenciar una tarjeta de esas...
He mirado en las páginas de santiago romero, y casi lo tengo a punto...
El unico problema es que cuando arranco el xawtv, se ve la cadena anterior q
había estado viendo con el otro SO, pero si intento sintonizar algún canal no consigo nada... :-(
Si al arrancar el xawtv veo perfectamente el canal que había visto antees...
¿los módulos estan bien? El tuner puede afectar? Os adjunto un dmes para que
veais como se cargan los modulos... la norma es la PAL para madrid, no?
Lo siento, pero estoy un poco perdido...
Gracias por cualquier indicación.
Luisma
Linux version 2.2.18pre21 (herbert@arnor) (gcc version 2.7.2.3) #1 Sat Nov 18 18:47:15 EST 2000
Detected 225004 kHz processor.
ide_setup: hdd=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 192040k/196608k available (1728k kernel code, 408k reserved, 2284k data, 148k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb070
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST38641A, ATA DISK drive
hdb: CREATIVE CD5220, ATAPI CDROM drive
hdc: Maxtor 84320D4, ATA DISK drive
hdd: SONY CD-RW CRX160E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST38641A, 8207MB w/128kB Cache, CHS=1046/255/63
hdc: Maxtor 84320D4, 4120MB w/256kB Cache, CHS=8930/15/63
hdb: ATAPI 52X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3
hdc: hdc1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 148k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 289160k swap-space (priority -1)
linear personality registered
3c59x.c 16Aug00 Donald Becker and others http://www.scyld.com/network/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0x6600, 00:50:04:48:fc:5b, IRQ 9
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6500, IRQ 10.
eth1: RealTek RTL-8029 found at 0x6500, IRQ 10, 52:54:00:E8:47:12.
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Linux video capture interface: v1.00
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.12 detected OK (220)
i2c: initialized
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 72, irq: 12, memory: 0xe2001000.
bttv: 1 Bt8xx card(s) found.
bttv0: NO fader chip: TEA6300
bttv0: model: BT878(AVerMedia TVCapture 98)
tuner: type is 5 (Philips PAL)
Linux I2O PCI support (c) 1999 Red Hat Software.
parport0: PC-style at 0x378 (0x778) [SPP,EPP,ECP,ECPEPP,ECPPS2]
lp0: using parport0 (polling).
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
I2O Core - (c) Copyright 1999 Red Hat Software.
i2o: Checking for PCI I2O controllers...
i2o: No PCI I2O controllers found
event thread created as pid 63
I2O Block Storage OSM v0.9. (C) 1999 Red Hat Software.
i2o_block: registered device at major 80
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
I2O configuration manager v 0.04
(C) Copyright 1999 Red Hat Software
SAA5249 driver (SAA5249 interface) for VideoText version 1.7
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
bttv0: PLL: 28636363 => 35468950 ... ok
Reply to: