Re: tape HP
On Thu, Aug 30, 2001 at 10:32:31AM +0200, Jaume Teixi wrote:
> hola
>
> modconf y configura los siguientes modulos en el kernel:
> sg + SCSI generic support
> st + SCSI tape support
>
> rebotas y: dmesg | grep 'scsi tape'
> Detected scsi tape st0 at scsi2, channel 0, id 6, lun 0
>
> luego ya puedes usar /dev/st0 (siempre rebobina) o bien /dev/nst0
>
> mt -f /dev/nst0 status
Bueno, muchas gracias pero ya lo resolví. El muy burro de "mí mismo" tenía puesto el "Generic SCSI" y por eso, a pesar de reconocerme bien la tarjeta y el dat, no me mapeaba los dispositivos adecuadamente. Lo quité y voilahop!. Esto del generic es para emular el scsi, y a mí se me había olvidado quitarlo (lo tenía por otros motivos, léase cd...).
Muchas gracias por las prontas respuestas y preocupación por el tema.
Have a nice day ;-)
TooManySecrets
--
Manuel Trujillo manueltrujillo@dorna.es
Technical Engineer http://www.motograndprix.com
Dorna Sports S.L. +34 93 4702864
Reply to:
- References:
- tape HP
- From: Manuel Trujillo <manueltrujillo@dorna.es>
- Re: tape HP
- From: Jaume Teixi <teixi@6tems.com>