Re: (Urgente) Booteo Con Floppy
On Mar 12 Dic 2000 18:20, JFreak wrote:
> No podia usar el Cd de instalacion por que mi bios no puede bootear
> desde el Cd-Rom y el
> problema era que no podia bootear tampoco desde el floppy con una imagen
> del disco para
> instalar, como mencione use la aplicacion loadlin para bootear con la
> imagen del floppy pero
> se trabo luego volvi a reiniciar la pc y por alguna razon (suerte podria
> ser...) logre bootear
> con el floppy, como dijiste monte la particion donde instale linux y
> quite el kdm que estaba
> en /etc/init.d/ para que usara el xdm con esto logre solucionar el
> problema que tenia para
> entrar, pero ahora no puedo cargar las X debido a un problema que tengo
> con las fonts, a
> continuacion les mando la salida que me da el startx. que puedo hacer
> para arreglar el problema, vuelvo a configurar las X con el xf86config??
> o tengo que hacer algo mas ??
>
>
> -----------------------------------INICIA
> AQUI----------------------------
>
> XFree86 Version 3.3.2.3 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: July 15 1998
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.0.36 i686 [ELF]
> Configured drivers:
> SVGA: server for SVGA graphics adaptors (Patchlevel 0):
> NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
> ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
> ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
> ET6100,
> et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
> wd90c33,
> gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx,
> tvga8800cs,
> tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
> tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
> tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
> tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
> 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
> clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446,
> clgd5480,
> clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225,
> clgd6235,
> clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22,
> ncr77c22e,
> cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067,
> oti077,
> oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
> ali2401,
> cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
> ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
> s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
> ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
> ct64300, generic
> (using VT number 7)
>
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
> (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
> (**) Mouse: 3 button emulation (timeout: 50ms)
> (**) SVGA: Graphics device ID: "SiS SG86C201"
> (**) SVGA: Monitor ID: "My Monitor"
> (--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
> (--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
> (--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
> (--) SVGA: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
> (--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> (--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
> (--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
> (--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
> (--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
> (--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
> (--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/misc/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc/").
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/75dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/100dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/75dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
> Warning: 'fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/100dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
> (**) FontPath set to
> "/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/"
> (--) SVGA: PCI: SiS SG86C205 rev 68, Memory @ 0xff000000
> (--) SVGA: using programmable clocks.
> (--) SVGA: chipset: sis86c205
> (--) SVGA: videoram: 1024k
> (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
> (--) SVGA: Maximum allowed dot-clock: 135.000 MHz
> (**) SVGA: Mode "640x480": mode clock = 31.500
> (**) SVGA: Mode "800x600": mode clock = 40.000
> (--) SVGA: There is no mode definition named "1024x768"
> (--) SVGA: Removing mode "1024x768" from list of valid modes.
> (**) SVGA: Virtual resolution set to 1152x900
> (--) SVGA: SpeedUp code selection modified because virtualX != 1024
> (--) SVGA: Using Linear Frame Buffer at 0x0ff000000, Size 1MB
> (--) SVGA: SIS: Memory mapped I/O selected at 0x0a0000
> (--) SVGA: Not enough off-screen video memory for hardware cursor, using
> software cursor.
> (--) SVGA: Using XAA (XFree86 Acceleration Architecture)
> (--) SVGA: XAA: Solid filled rectangles
> (--) SVGA: XAA: Screen-to-screen copy
> (--) SVGA: XAA: 8x8 color expand pattern fill
> (--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext,
> polytext)
> (--) SVGA: XAA: Using 9 128x8 areas for pixmap caching
> (--) SVGA: XAA: Caching tiles and stipples
> (--) SVGA: XAA: Horizontal and vertical lines and segments
> System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
> -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp
> "> " -eml "Errors from xkbcomp are not fatal to the X server"
> keymap/xfree86 compiled/xfree86.xkm'
>
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> _X11TransSocketUNIXConnect: Can't connect: errno = 111
> giving up.
> xinit: Connection refused (errno 111): unable to connect to X server
> xinit: No such process (errno 3): Server error.
>
> --------------------------TERMINA
> AQUI------------------------------------
>
Tienes un problema que suele ocurrir bastante. Ya no me acuerdo si lo del kdm
te ocurria desde el principio o te paso luego, el caso es que el sevidor de
fuentes de las X no te rula, o no lo tienes instalado. No se que paquetes
tienes instalados asi que te voy a dar dos posibles soluciones.
La primera a instalar los paquetes de fuentes de las X. Como no sabrás cuales
son metete en el dselect y busca xfonts. el comando es "/" igual que en el
vi. y para que te busque el siguiente "\". Selecciona los paquetes de
fuentes que quieras pero como mínimo xfonts-100dpi y xfonts-75dpi y tambien
mira haber si tienes instalado el paquete xfs-xtt es el servidor de fuentes
True Type para las X.
La segunda, si ya están instalados esos paquetes desistalalos y vuelve a
instalarlos. Puede que te de algún que otro error en la desistalación, en el
caoso de que no se te desistalen, lo tendrás que hacer a pelo. dpkg -r
<Nombre de paquete> y dpkg --purge <Nombre de paquete>. Si esto no va
tendrás que buscar los paquetes de las X en el CDROM y reinstalarlos a pelo
dpkg -i <Nombre de Paquete>.
Por cierto otra opcion es desistalar con el dselect todos los paquetes de las
X, xserver-svga, ...., y luego volver a instalarlos.
Espero que te sirva.
Reply to: