Re: (Urgente) Booteo Con Floppy
No podia usar el Cd de instalacion por que mi bios no puede bootear
desde el Cd-Rom y el
problema era que no podia bootear tampoco desde el floppy con una imagen
del disco para
instalar, como mencione use la aplicacion loadlin para bootear con la
imagen del floppy pero
se trabo luego volvi a reiniciar la pc y por alguna razon (suerte podria
ser...) logre bootear
con el floppy, como dijiste monte la particion donde instale linux y
quite el kdm que estaba
en /etc/init.d/ para que usara el xdm con esto logre solucionar el
problema que tenia para
entrar, pero ahora no puedo cargar las X debido a un problema que tengo
con las fonts, a
continuacion les mando la salida que me da el startx. que puedo hacer
para arreglar el problema, vuelvo a configurar las X con el xf86config??
o tengo que hacer algo mas ??
Ejecute la aplicacion mkfontdir como suguiere en el mensaje de error pero no obtuve ningun
resultado...
-----------------------------------INICIA
AQUI----------------------------
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx,
tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446,
clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225,
clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22,
ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067,
oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "SiS SG86C201"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/misc/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc/").
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/"
(--) SVGA: PCI: SiS SG86C205 rev 68, Memory @ 0xff000000
(--) SVGA: using programmable clocks.
(--) SVGA: chipset: sis86c205
(--) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "640x480": mode clock = 31.500
(**) SVGA: Mode "800x600": mode clock = 40.000
(--) SVGA: There is no mode definition named "1024x768"
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(**) SVGA: Virtual resolution set to 1152x900
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0ff000000, Size 1MB
(--) SVGA: SIS: Memory mapped I/O selected at 0x0a0000
(--) SVGA: Not enough off-screen video memory for hardware cursor, using
software cursor.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext,
polytext)
(--) SVGA: XAA: Using 9 128x8 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
-xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp
"> " -eml "Errors from xkbcomp are not fatal to the X server"
keymap/xfree86 compiled/xfree86.xkm'
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
--------------------------TERMINA
AQUI------------------------------------
Israel Gutierrez ha escrito:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> El mar, 12 de dic de 2000, a las 08:49:07 -0600, JFreak dijo:
> >
> > Donde tengo que quitar el kdm y poner que use el xdm?? en el
> > xdm.options?? donde esta ese fichero??
> apt-get remove --purge kdm; apt-get install xdm
> O, en el /etc/inittab tendras una linea que hable de kdm, solo tendrias
> que cambiarla.
> Quiza haya alguna manera mas debianera, pero hasta ahi no llego XD.
> - --
> Desde que uso software libre, mi ropa queda mas blanca (maruja liberada).
> http://perso.wanadoo.es/rt001u4b/ amphora at escomposlinux dot org
> Llave gpg: emilio con subject "Mandar clave pgp"
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.4 (GNU/Linux)
> Comment: For info see http://www.gnupg.org
>
> iD8DBQE6Nn0WbxRsnxqoy84RAhjBAJ9TD7hwAuBOnkh+uZN9wKVh+KBgswCglFwC
> RGitbuB8fh2EAWQnz2pQiqU=
> =CTrA
> -----END PGP SIGNATURE-----
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-spanish-request@lists.debian.org < /dev/null
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: