Re: PROBLEMAS CON EL XWINDOWS Y DEBIAN 2.0 ( hamm )
On Mon, Nov 23, 1998 at 10:14:14AM +0100, Herranz Martin Rogelio wrote:
> Lo que pasa es que en las ultimas versiones, en concreto con la del hamm,
> pues la S3 Virge usa el servidor SVGA en vez del S3V.
¿Seguro?
--------------- Cortado y pegado ------------------------------
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "es"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: resolution: 100, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) S3V: Graphics device ID: "Primary Card"
(**) S3V: Monitor ID: "Primary Monitor"
(**) Algunas cosas más...................
--------------------------------------------------------------
No sé cual puede ser el problema, lo que es evidente es que funciona
el servidor S3V (doy fe de ello), además con los paquetes que traía la
distribución sin añadir nada (aunque he oido que tenian algún bug yo no lo
he notado). Mi tarjeta es una clónica marca el pato, pero también tiene el
chip 86C325, 4Mb de Ram y está funcionando a 16bpp.
Te pongo parte de mi XF86Config por si te sirve de algo.
---------- XF86Config -------------------------------------------------
# XF86Config auto-generated by XF86Setup
#
# Copyright (c) 1996 by The XFree86 Project, Inc.
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "es"
EndSection
Section "Pointer"
Protocol "Microsoft"
Device "/dev/mouse"
BaudRate 1200
Emulate3Timeout 50
Resolution 100
Buttons 3
Emulate3Buttons
EndSection
#-----------------------------------------------------------
# Ojo con las frecuencias estas son para mi monitor de 17''
#-----------------------------------------------------------
Section "Monitor"
Identifier "Primary Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5-48.5
VertRefresh 55-90
Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
EndSection
Section "Device"
Identifier "Primary Card"
VendorName "Unknown"
BoardName "S3 ViRGE/DX (generic)"
Chipset "s3_virge"
Option "dac_6_bit"
VideoRam 4096
#Option "xaa_benchmark"
#Option "fifo_moderate"
Option "pci_burst_on"
Option "pci_retry"
Option "hw_cursor"
EndSection
Section "Screen"
Driver "Accel"
Device "Primary Card"
Monitor "Primary Monitor"
DefaultColorDepth 16
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
# Aqui debajo vienen SVGA, VGA y Mono
---------------- Fin --------------------------------------------------
Saludos y suerte con las X.
--
This message has been written in 100% recycled paper
Powered by Linux Debian 2.0 with kernel 2.0.35
Running on CASIO fx-6300G Scientific calculator.
Registered User/Machine: 92691/34454
Reply to: