Re: terceira interface de rede não aparece no vmware
está normal, gabriel. funcionando. nem precisou usar o mii-tool.
2013/5/6 Gabriel Ricardo <gricardo87@gmail.com>:
> tenta com ifup, e cole para nos sua configuração
>
>
> Atenciosamente,
> Gabriel Ricardo
> Consultor em Tecnologia
> Cel.: (41) 8881-7828
> Skype: gabriel.nerdworkti
> Facebook: facebook.com/nerdworkti
> Site: www.nerdworkti.com.br
>
>
> 2013/5/6 Fred Maranhão <fred.maranhao@gmail.com>
>>
>> beleza. configurando a eth2 no /etc/network/interfaces, mesmo sem
>> aparecer no ifconfig, quando dou um /etc/init.d/networking restart,
>> sobe normal.
>>
>> Em 6 de maio de 2013 11:23, Gabriel Ricardo <gricardo87@gmail.com>
>> escreveu:
>> > - configurar interface no arquivo interfaces
>> > - testar conectividade com dmesg ou mii-tool
>> > - ifup, ifdown
>> >
>> >
>> > Atenciosamente,
>> > Gabriel Ricardo
>> > Consultor em Tecnologia
>> > Cel.: (41) 8881-7828
>> > Skype: gabriel.nerdworkti
>> > Facebook: facebook.com/nerdworkti
>> > Site: www.nerdworkti.com.br
>> >
>> >
>> > 2013/5/6 Fred Maranhão <fred.maranhao@gmail.com>
>> >>
>> >> Em 6 de maio de 2013 10:13, Gabriel Ricardo <gricardo87@gmail.com>
>> >> escreveu:
>> >> > dmesg | grep -i eth
>> >>
>> >> # dmesg | grep -i eth
>> >> [ 1.929416] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
>> >> Connection
>> >> [ 2.295511] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
>> >> Connection
>> >> [ 2.658719] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network
>> >> Connection
>> >> [ 6.015144] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
>> >> Control: None
>> >> [ 6.017763] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> >> [ 6.019724] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> >> [ 6.028688] ADDRCONF(NETDEV_UP): eth1: link is not ready
>> >> [ 6.030580] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow
>> >> Control: None
>> >> [ 6.033055] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>> >> [ 16.461526] eth0: no IPv6 routers present
>> >> [ 16.555927] eth1: no IPv6 routers present
>> >>
>> >> por que o eth2 não fica "becomes ready"
>> >
>> >
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact
>> listmaster@lists.debian.org
>> Archive:
>> http://lists.debian.org/CAPr829kJfcWAf3YFgu-o4LR8UUrj_ZtHTVVbSuMafcaZa1Q@mail.gmail.com
>>
>
Reply to: