Re: terceira interface de rede não aparece no vmware

[Fred Maranhão <fred.maranhao@gmail.com>]

beleza. configurando a eth2 no /etc/network/interfaces, mesmo sem
aparecer no ifconfig, quando dou um /etc/init.d/networking restart,
sobe normal.

Em 6 de maio de 2013 11:23, Gabriel Ricardo <gricardo87@gmail.com> escreveu:
> - configurar interface no arquivo interfaces
> - testar conectividade com dmesg ou mii-tool
> - ifup, ifdown
>
>
> Atenciosamente,
> Gabriel Ricardo
> Consultor em Tecnologia
> Cel.: (41) 8881-7828
> Skype: gabriel.nerdworkti
> Facebook: facebook.com/nerdworkti
> Site: www.nerdworkti.com.br
>
>
> 2013/5/6 Fred Maranhão <fred.maranhao@gmail.com>
>>
>> Em 6 de maio de 2013 10:13, Gabriel Ricardo <gricardo87@gmail.com>
>> escreveu:
>> > dmesg | grep -i eth
>>
>> # dmesg | grep -i eth
>> [    1.929416] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
>> Connection
>> [    2.295511] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
>> Connection
>> [    2.658719] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network
>> Connection
>> [    6.015144] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
>> Control: None
>> [    6.017763] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [    6.019724] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [    6.028688] ADDRCONF(NETDEV_UP): eth1: link is not ready
>> [    6.030580] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow
>> Control: None
>> [    6.033055] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>> [   16.461526] eth0: no IPv6 routers present
>> [   16.555927] eth1: no IPv6 routers present
>>
>> por que o eth2 não fica "becomes ready"
>
>