[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Máquina não desliga sozinha com kernel 2.6.37



É, desde que apliquei os patches de correções, não tive mais problemas. Verifiquei que tinha alguns problemas relacionados com alguns módulos de placas Intel, como i915 e snd_hda_intel nos changelogs. Provavelmente foi algum módulo que causou o problema. Valeu a força!

On Fri, 18 Feb 2011 21:47:22 -0400
Rodolfo <rof20004@gmail.com> wrote:

> Beleza =D
> 
> Em 18 de fevereiro de 2011 20:54, André Luiz Fraga Moreira <
> andre4debian@gmail.com> escreveu:
> 
> > Opa
> >
> > Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro
> > patch de correções. Dei uma olhada rápida no changelog e não encontrei
> > nenhum problema referente ao que estou tendo. Vou ver se o problema foi
> > resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu.
> >
> > Valeu a força!
> > Abraço
> >
> > On Fri, 18 Feb 2011 14:55:41 -0400
> >  Rodolfo <rof20004@gmail.com> wrote:
> >
> > > Vamo tentar......
> > >
> > >
> > > no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do
> > arquivo:
> > >
> > >
> > > rmmod snd_hda_intel
> > >
> > >
> > > Da retorno.
> > >
> > > Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira <
> > > andre4debian@gmail.com> escreveu:
> > >
> > > > # lsmod | grep snd_hda_intel
> > > > snd_hda_intel          18596  4
> > > > snd_hda_codec          52214  3
> > > > snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel
> > > > snd_pcm                60511  3 snd_hda_intel,snd_hda_codec
> > > > snd                    46670  14
> > > >
> > snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
> > > > snd_page_alloc          6081  2 snd_hda_intel,snd_pcm
> > > >
> > > > É, eu tenho o módulo ativo. Mas será que é por causa desse módulo?
> > Porque o
> > > > problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca
> > tinha
> > > > congelado no desligamento mesmo com o módulo ativo.
> > > >
> > > > Abraço
> > > >
> > > > On Thu, 17 Feb 2011 21:56:13 -0400
> > > >  Rodolfo <rof20004@gmail.com> wrote:
> > > >
> > > > > SO mais um pedido, digite como root:
> > > > >
> > > > > lsmod | grep snd_hda_intel
> > > > >
> > > > >
> > > > > quero saber se você usa esse modulo como driver de som. Algumas
> > pessoas
> > > > tem
> > > > > este tipo de problema ao usar o módulo acima citado.
> > > > >
> > > > >
> > > > > Abraços
> > > > >
> > > > > Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira <
> > > > > andre4debian@gmail.com> escreveu:
> > > > >
> > > > > > # dmesg | grep acpi
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > > > > > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > > > > > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > > > > > [    2.950953] ACPI: acpi_idle registered with cpuidle
> > > > > > [   26.675955] acpi device:30: registered as cooling_device2
> > > > > >
> > > > > >
> > > > > > Estou mandando também a saída usando a opção -i do grep, para
> > mostrar
> > > > mais
> > > > > > saídas referentes a acpi tanto em letras maiúsculas quanto em
> > > > minúsculas de
> > > > > > forma a ficar mais detalhado.
> > > > > >
> > > > > > # dmesg | grep -i acpi
> > > > > > [    0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL  )
> > > > > > [    0.000000] ACPI: XSDT 00000000bf66f200 00064 (v01 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: FACP 00000000bf66f09c 000F4 (v04 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: DSDT 00000000bf66f800 05477 (v02 INT430
> > SYSFexxx
> > > > > > 00001001 INTL 20050624)
> > > > > > [    0.000000] ACPI: FACS 00000000bf67e000 00040
> > > > > > [    0.000000] ACPI: HPET 00000000bf66f300 00038 (v01 DELL    M08
> > > > > > 00000001 ASL  00000061)
> > > > > > [    0.000000] ACPI: APIC 00000000bf66f400 00068 (v01 DELL    M08
> > > > > > 27D80A10 ASL  00000047)
> > > > > > [    0.000000] ACPI: MCFG 00000000bf66f3c0 0003E (v16 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: SLIC 00000000bf66f49c 00176 (v01 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: OSFR 00000000bf66ea00 0002C (v01 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: BOOT 00000000bf66efc0 00028 (v01 DELL    M08
> > > > > > 27D80A10 ASL  00000061)
> > > > > > [    0.000000] ACPI: SSDT 00000000bf66da44 004CC (v01  PmRef
> >  CpuPm
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.000000] ACPI: Local APIC address 0xfee00000
> > > > > > [    0.000000] ACPI: PM-Timer IO Port: 0x1008
> > > > > > [    0.000000] ACPI: Local APIC address 0xfee00000
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > > > > > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > > > > > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > > > > > [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000]
> > gsi_base[0])
> > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> > dfl)
> > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> > > > level)
> > > > > > [    0.000000] ACPI: IRQ0 used by override.
> > > > > > [    0.000000] ACPI: IRQ2 used by override.
> > > > > > [    0.000000] ACPI: IRQ9 used by override.
> > > > > > [    0.000000] Using ACPI (MADT) for SMP configuration information
> > > > > > [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > > > > > [    0.008585] ACPI: Core revision 20101013
> > > > > > [    0.148662] ACPI: bus type pci registered
> > > > > > [    0.153294] ACPI: EC: Look up EC in DSDT
> > > > > > [    0.166448] ACPI: SSDT 00000000bf66e57a 00202 (v01  PmRef
> >  Cpu0Ist
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.166832] ACPI: Dynamic OEM Table Load:
> > > > > > [    0.166974] ACPI: SSDT           (null) 00202 (v01  PmRef
> >  Cpu0Ist
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.167407] ACPI: SSDT 00000000bf66df10 005E5 (v01  PmRef
> >  Cpu0Cst
> > > > > > 00003001 INTL 20050624)
> > > > > > [    0.167778] ACPI: Dynamic OEM Table Load:
> > > > > > [    0.167920] ACPI: SSDT           (null) 005E5 (v01  PmRef
> >  Cpu0Cst
> > > > > > 00003001 INTL 20050624)
> > > > > > [    0.168374] ACPI: SSDT 00000000bf66e77c 000C4 (v01  PmRef
> >  Cpu1Ist
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.168748] ACPI: Dynamic OEM Table Load:
> > > > > > [    0.168890] ACPI: SSDT           (null) 000C4 (v01  PmRef
> >  Cpu1Ist
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.169170] ACPI: SSDT 00000000bf66e4f5 00085 (v01  PmRef
> >  Cpu1Cst
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.169535] ACPI: Dynamic OEM Table Load:
> > > > > > [    0.169677] ACPI: SSDT           (null) 00085 (v01  PmRef
> >  Cpu1Cst
> > > > > > 00003000 INTL 20050624)
> > > > > > [    0.170011] ACPI: Interpreter enabled
> > > > > > [    0.170069] ACPI: (supports S0 S3 S4 S5)
> > > > > > [    0.170309] ACPI: Using IOAPIC for interrupt routing
> > > > > > [    0.205488] PCI: Using host bridge windows from ACPI; if
> > necessary,
> > > > use
> > > > > > "pci=nocrs" and report a bug
> > > > > > [    0.218138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
> > 00-ff])
> > > > > > [    0.245781] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed
> > by
> > > > ICH6
> > > > > > ACPI/GPIO/TCO
> > > > > > [    0.255791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > > > > > [    0.256056] ACPI: PCI Interrupt Routing Table
> > [\_SB_.PCI0.PCIE._PRT]
> > > > > > [    0.256161] ACPI: PCI Interrupt Routing Table
> > [\_SB_.PCI0.RP01._PRT]
> > > > > > [    0.256215] ACPI: PCI Interrupt Routing Table
> > [\_SB_.PCI0.RP02._PRT]
> > > > > > [    0.256272] ACPI: PCI Interrupt Routing Table
> > [\_SB_.PCI0.RP05._PRT]
> > > > > > [    0.266097] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
> > > > > > [    0.266450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
> > > > > > [    0.266800] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
> > > > > > [    0.267182] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11)
> > *0,
> > > > > > disabled.
> > > > > > [    0.267702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9
> > *10 11
> > > > 12
> > > > > > 14 15)
> > > > > > [    0.268398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9
> > 10 11
> > > > 12
> > > > > > 14 15)
> > > > > > [    0.269097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9
> > 10 11
> > > > 12
> > > > > > 14 15)
> > > > > > [    0.269782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10
> > 11
> > > > 12
> > > > > > 14 15) *0, disabled.
> > > > > > [    0.270948] PCI: Using ACPI for IRQ routing
> > > > > > [    0.277738] pnp: PnP ACPI init
> > > > > > [    0.277812] ACPI: bus type pnp registered
> > > > > > [    0.290206] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
> > > > (active)
> > > > > > [    0.290275] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02
> > > > (active)
> > > > > > [    0.290329] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13
> > > > (active)
> > > > > > [    0.290384] pnp 00:03: Plug and Play ACPI device, IDs PNP0303
> > > > (active)
> > > > > > [    0.290435] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00
> > > > (active)
> > > > > > [    0.290485] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
> > > > (active)
> > > > > > [    0.290547] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01
> > > > (active)
> > > > > > [    0.290608] pnp 00:07: Plug and Play ACPI device, IDs PNP0200
> > > > (active)
> > > > > > [    0.290659] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04
> > > > (active)
> > > > > > [    0.290748] pnp 00:09: Plug and Play ACPI device, IDs PNP0103
> > > > PNP0c01
> > > > > > (active)
> > > > > > [    0.291108] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01
> > > > (active)
> > > > > > [    0.291510] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01
> > > > (active)
> > > > > > [    0.305393] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01
> > > > (active)
> > > > > > [    0.305457] pnp: PnP ACPI: found 13 devices
> > > > > > [    0.305515] ACPI: ACPI bus type pnp unregistered
> > > > > > [    0.556731] ACPI: Thermal Zone [THM] (39 C)
> > > > > > [    2.906534] ACPI: Lid Switch [LID]
> > > > > > [    2.906802] ACPI: Power Button [PBTN]
> > > > > > [    2.907060] ACPI: Sleep Button [SBTN]
> > > > > > [    2.950953] ACPI: acpi_idle registered with cpuidle
> > > > > > [    2.971400] ACPI: AC Adapter [AC] (on-line)
> > > > > > [    3.037921] ACPI: Battery Slot [BAT0] (battery present)
> > > > > > [   26.675955] acpi device:30: registered as cooling_device2
> > > > > > [   26.676541] ACPI: Video Device [VID] (multi-head: yes  rom: no
> > > >  post:
> > > > > > no)
> > > > > > [   26.676572] [Firmware Bug]: Duplicate ACPI video bus devices for
> > the
> > > > > > same VGA controller, please try module parameter
> > > > > > "video.allow_duplicates=1"if the current driver doesn't work.
> > > > > >
> > > > > > On Thu, 17 Feb 2011 18:07:15 -0400
> > > > > > Rodolfo <rof20004@gmail.com> wrote:
> > > > > >
> > > > > > > digita dmesg | grep acpi e informe-nos a saida desse comando..
> > > > > > Ah...digite
> > > > > > > como root
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Em 16 de fevereiro de 2011 22:35, André Luiz Fraga Moreira <
> > > > > > > andre4debian@gmail.com> escreveu:
> > > > > > >
> > > > > > > > Boa noite, amigos da lista
> > > > > > > >
> > > > > > > > Estou com o seguinte problema:
> > > > > > > >
> > > > > > > > Depois que compilei e instalei o kernel 2.6.37 no meu Debian,
> > às
> > > > vezes
> > > > > > meu
> > > > > > > > notebook trava durante o desligamento. O reboot é sempre
> > normal,
> > > > mas o
> > > > > > > > desligamento de vez em quando agarra, ficando parado em uma
> > > > mensagem
> > > > > > > > "Disabling non-boot CPUs".
> > > > > > > >
> > > > > > > > Cheguei a suspeitar que era o BLK (Big Kernel Lock) que estava
> > > > causando
> > > > > > o
> > > > > > > > problema, mas mesmo após desabilitá-lo, o erro ocorria.
> > > > > > > >
> > > > > > > > Pesquisando na Internet, vi que poderia ser problema na BIOS da
> > > > > > máquina,
> > > > > > > > mas fiz testes usando o kernel anterior (2.6.36.2) e não
> > ocorreram
> > > > > > problemas
> > > > > > > > durante o desligamento, o que me fez suspeitar do kernel
> > 2.6.37.
> > > > > > > >
> > > > > > > > Alguém sabe se é algum bug no kernel 2.6.37 ou algo do tipo que
> > > > esteja
> > > > > > > > causando isso? O estranho é que o problema não ocorre toda vez
> > que
> > > > eu
> > > > > > > > desligo a máquina, só de vez em quando. Meu notebook é um Dell
> > > > Inspiron
> > > > > > > > 1525.
> > > > > > > >
> > > > > > > > Agradeço qualquer ajuda, valeu!
> > > > > > > >
> > > > > > > > --
> > > > > > > > André Luiz Fraga Moreira <andre4debian@gmail.com>
> > > > > > > > Matriculado no curso de Tecnologia em Redes de Computadores
> > > > > > > > Linux Professional Institute Certified - LPIC 1
> > > > > > > > Debian user - www.debian.org
> > > > > > > > twitter e identi.ca: @andreluizfm
> > > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >  André Luiz Fraga Moreira <andre4debian@gmail.com>
> > > > > > Matriculado no curso de Tecnologia em Redes de Computadores
> > > > > > Linux Professional Institute Certified - LPIC 1
> > > > > > Debian user - www.debian.org
> > > > > > twitter e identi.ca: @andreluizfm
> > > > > >
> > > >
> > > >
> > > > --
> > > >  André Luiz Fraga Moreira <andre4debian@gmail.com>
> > > > Matriculado no curso de Tecnologia em Redes de Computadores
> > > > Linux Professional Institute Certified - LPIC 1
> > > > Debian user - www.debian.org
> > > > twitter e identi.ca: @andreluizfm
> > > >
> >
> >
> > --
> >  André Luiz Fraga Moreira <andre4debian@gmail.com>
> > Matriculado no curso de Tecnologia em Redes de Computadores
> > Linux Professional Institute Certified - LPIC 1
> > Debian user - www.debian.org
> > twitter e identi.ca: @andreluizfm
> >


-- 
André Luiz Fraga Moreira <andre4debian@gmail.com>
Matriculado no curso de Tecnologia em Redes de Computadores
Linux Professional Institute Certified - LPIC 1
Debian user - www.debian.org
twitter e identi.ca: @andreluizfm

Attachment: pgpTyKJjEJYbD.pgp
Description: PGP signature


Reply to: