Re: GDM Não funciona (unable to open /dev/agpgart (No Such file or directory))
Olá,
dei o tal comando mas deu .udevdb or .udev presence implies active
udev. Aborting MAKEDEV invocation.
Eu coloquei os modes no xorg.conf tb.
sobre a pergunta da memória eu olhei na bios e tinha isso:
Video Configuration
IGD DVMT Memory Maximum DVMT
PGE Negotiaded Width Not detected
Primary Video Adaptor [Auto]
Eu acho que não é problema de hardware pq o ubuntu (live) funcionou normal.
abs
2009/9/16 Rodolfo <rof20004@gmail.com>:
> se ainda não funcionar....faz essa merda NA MARRA ¬¬
>
> como root entra no diretorio /dev
>
> e digita la
>
> MAKEDEV agpgart
>
> depois reinicia a maquina e vê se o agpgart ta la no /dev...se não
> estiver....faz o MAKEDEV de novo e para o GDM depois inicia novamente...
>
> agora ve se essa bosta nao funfa.....rsrsrsrsrs....cara....eu ja passei por
> isso ...é chato mesmo
>
> =D
>
> 2009/9/16 Rodolfo <rof20004@gmail.com>
>>
>> ahh.....coloca em /etc/modules (ou modules.conf?) bom coloca em
>> /etc/modules isso
>>
>> "intel_agp"
>>
>> depois reinicia a maquina
>>
>> 2009/9/16 Rodolfo <rof20004@gmail.com>
>>>
>>> ok..mas faz devagar..jaja a gente cria esse agpgart...por
>>> enquanto.....faz com calma......vc colocou os modes ?
>>>
>>> 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>
>>>>
>>>> Não rolou :-(
>>>>
>>>> Eu já tinha colocado esse xorg mais completo no /etc/X11. O que
>>>> intriga é esse erro que dá na inicialização do gdm (Unable to open
>>>> /dev/agpgart (no such file or directory)
>>>>
>>>> abs
>>>>
>>>> 2009/9/16 Rodolfo <rof20004@gmail.com>:
>>>> > ok ...então ainda não edite o arquivo blacklist......parece que esse
>>>> > xorg ae
>>>> > ta mais completo que o outro certo ?
>>>> >
>>>> > então faça o seguinte....
>>>> >
>>>> > SubSection "Display"
>>>> > Viewport 0 0
>>>> > Depth 4
>>>> > EndSubSection
>>>> >
>>>> > digite assim em baixo da palavra Depth
>>>> >
>>>> > Modes "1024x768" "800x600" "640x480"
>>>> >
>>>> > aconselho a fazer isso embaixo somente das palavras Depth 16 e Depth
>>>> > 24....são as mais usadas....e não esqueça...ainda não coloque o drm no
>>>> > blacklist
>>>> >
>>>> > as resoluções são entre aspas mesmo....faça isso pra cada Depth(quer
>>>> > dizer
>>>> > bits de cor do xorg....)
>>>> >
>>>> > depois salve o arquivo e faça aquele procedimento...../etc/init.d/gdm
>>>> > stop
>>>> > depois inicie novamente
>>>> >
>>>> > /etc/init.d/gdm start
>>>> >
>>>> > e não esqueça de substituir esse xorg mais completo pelo que está no
>>>> > /etc/X11...aguardo resultados
>>>> >
>>>> > 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>
>>>> >>
>>>> >> Olá,
>>>> >>
>>>> >> O arquivo tá mesmo no etc/modprobe.d como o Renato disse.
>>>> >>
>>>> >> segue o conf do xorg
>>>> >>
>>>> >> Abs
>>>> >> Fernando
>>>> >>
>>>> >> Section "ServerLayout"
>>>> >> Identifier "X.org Configured"
>>>> >> Screen 0 "Screen0" 0 0
>>>> >> InputDevice "Mouse0" "CorePointer"
>>>> >> InputDevice "Keyboard0" "CoreKeyboard"
>>>> >> EndSection
>>>> >>
>>>> >> Section "Files"
>>>> >> RgbPath "/etc/X11/rgb"
>>>> >> ModulePath "/usr/lib/xorg/modules"
>>>> >> FontPath "/usr/share/fonts/X11/misc"
>>>> >> FontPath "/usr/share/fonts/X11/cyrillic"
>>>> >> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
>>>> >> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
>>>> >> FontPath "/usr/share/fonts/X11/Type1"
>>>> >> FontPath "/usr/share/fonts/X11/100dpi"
>>>> >> FontPath "/usr/share/fonts/X11/75dpi"
>>>> >> FontPath
>>>> >> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
>>>> >> EndSection
>>>> >>
>>>> >> Section "Module"
>>>> >> Load "extmod"
>>>> >> Load "glx"
>>>> >> Load "GLcore"
>>>> >> Load "dri"
>>>> >> Load "xtrap"
>>>> >> Load "record"
>>>> >> Load "dbe"
>>>> >> EndSection
>>>> >>
>>>> >> Section "InputDevice"
>>>> >> Identifier "Keyboard0"
>>>> >> Driver "kbd"
>>>> >> EndSection
>>>> >>
>>>> >> Section "InputDevice"
>>>> >> Identifier "Mouse0"
>>>> >> Driver "mouse"
>>>> >> Option "Protocol" "auto"
>>>> >> Option "Device" "/dev/input/mice"
>>>> >> Option "ZAxisMapping" "4 5 6 7"
>>>> >> EndSection
>>>> >>
>>>> >> Section "Monitor"
>>>> >> #DisplaySize 330 240 # mm
>>>> >> Identifier "Monitor0"
>>>> >> VendorName "GSM"
>>>> >> ModelName ""
>>>> >> ### Comment all HorizSync and VertRefresh values to use DDC:
>>>> >> HorizSync 30.0 - 71.0
>>>> >> VertRefresh 50.0 - 160.0
>>>> >> Option "DPMS"
>>>> >> EndSection
>>>> >>
>>>> >> Section "Device"
>>>> >> ### Available Driver options are:-
>>>> >> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>>> >> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>>> >> ### [arg]: arg optional
>>>> >> #Option "NoAccel" # [<bool>]
>>>> >> #Option "SWcursor" # [<bool>]
>>>> >> #Option "ColorKey" # <i>
>>>> >> #Option "CacheLines" # <i>
>>>> >> #Option "Dac6Bit" # [<bool>]
>>>> >> #Option "DRI" # [<bool>]
>>>> >> #Option "NoDDC" # [<bool>]
>>>> >> #Option "ShowCache" # [<bool>]
>>>> >> #Option "XvMCSurfaces" # <i>
>>>> >> #Option "PageFlip" # [<bool>]
>>>> >> Identifier "Card0"
>>>> >> Driver "intel"
>>>> >> VendorName "Intel Corporation"
>>>> >> BoardName "Unknown Board"
>>>> >> BusID "PCI:0:2:0"
>>>> >> EndSection
>>>> >>
>>>> >> Section "Screen"
>>>> >> Identifier "Screen0"
>>>> >> Device "Card0"
>>>> >> Monitor "Monitor0"
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 1
>>>> >> EndSubSection
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 4
>>>> >> EndSubSection
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 8
>>>> >> EndSubSection
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 15
>>>> >> EndSubSection
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 16
>>>> >> EndSubSection
>>>> >> SubSection "Display"
>>>> >> Viewport 0 0
>>>> >> Depth 24
>>>> >> EndSubSection
>>>> >> EndSection
>>>> >>
>>>> >>
>>>> >>
>>>> >> 2009/9/16 Rodolfo <rof20004@gmail.com>:
>>>> >> > é o seguinte....o arquivo "blacklist" não precisa ser
>>>> >> > criado.....digite
>>>> >> > como
>>>> >> > root
>>>> >> >
>>>> >> > "updatedb"
>>>> >> >
>>>> >> > espere alguns minutos....isso vai criar um DB de todos os arquivos
>>>> >> > existente
>>>> >> > em seu sistema......se funcionar digite depois
>>>> >> >
>>>> >> > "locate blacklist"
>>>> >> >
>>>> >> > daí vai mostrar onde está o arquivo blacklist.....se esses comandos
>>>> >> > não
>>>> >> > funcionarem...então faça
>>>> >> >
>>>> >> > esse
>>>> >> >
>>>> >> > "find /etc -name blacklist"
>>>> >> >
>>>> >> > apague esse blacklist que vc criou....se ele não existir
>>>> >> > mesmo...então
>>>> >> > crie
>>>> >> > ele dentro da pasta /etc/modules...
>>>> >> >
>>>> >> > e me mostre aqui o conteúdo do xorg.conf gerado por aquele comando
>>>> >> > que
>>>> >> > eu te
>>>> >> > mostrei la em cima...
>>>> >> >
>>>> >> > 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>
>>>> >> >>
>>>> >> >> Olá,
>>>> >> >>
>>>> >> >> O arquivo blacklist não tinha mesmo. Criei em /etc
>>>> >> >>
>>>> >> >> Sobre o xorg.conf eu executei a configuração (X - configure) e ele
>>>> >> >> gerou um arquivo modelo no diretório /root. Copiei-o como
>>>> >> >> xorg.conf
>>>> >> >> para o dir /etc/X11
>>>> >> >>
>>>> >> >> Mas ainda dá o mesmo erro. O que achei interessante é que não
>>>> >> >> achei
>>>> >> >> essas linhas q vc mandou desabilitar no xorg.conf.
>>>> >> >>
>>>> >> >>
>>>> >> >> Abs
>>>> >> >> Fernando
>>>> >> >>
>>>> >> >> 2009/9/16 Rodolfo <rof20004@gmail.com>:
>>>> >> >> > ok....procure em /etc/modules ou em /etc algum arquivo chamado
>>>> >> >> > Blacklist....la vc coloca o que eu disse:
>>>> >> >> >
>>>> >> >> > "blacklist drm"
>>>> >> >> >
>>>> >> >> > depois reinicie sua máquina e veja se funciona
>>>> >> >> >
>>>> >> >> > e outra.....seu xorg.conf está sem configurção.....digite como
>>>> >> >> > root
>>>> >> >> > depois
>>>> >> >> > de reiniciar e não tiver funcinado o seguinte comando....
>>>> >> >> >
>>>> >> >> > "X -configure"
>>>> >> >> >
>>>> >> >> > aguardo resultado.
>>>> >> >> >
>>>> >> >> >
>>>> >> >> > 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>
>>>> >> >> >>
>>>> >> >> >> Olá,
>>>> >> >> >>
>>>> >> >> >> Desliguei o gdm e digitei o comando modprobe -r drm. A mensagem
>>>> >> >> >> foi
>>>> >> >> >> que o módulo está em uso.
>>>> >> >> >>
>>>> >> >> >> Sobre o arquivo a única coisa que eu tenho no /etc é um arquivo
>>>> >> >> >> chamado modules. Eu coloquei o comando q vc disse e reiniciei o
>>>> >> >> >> gdm,
>>>> >> >> >> persistindo o erro.
>>>> >> >> >>
>>>> >> >> >> A coisa que parece errada pra mim é o conteúdo do arquivo
>>>> >> >> >> xorg.conf,
>>>> >> >> >> no caminho q vc indicou. eu posto aqui o conteúdo dele. As
>>>> >> >> >> linhas q
>>>> >> >> >> vc
>>>> >> >> >> disse, por exemplo não aparecem pra mim. Eu posto o conteúdo no
>>>> >> >> >> final.
>>>> >> >> >>
>>>> >> >> >> Abs
>>>> >> >> >> Fernando
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >> Section "InputDevice"
>>>> >> >> >> Identifier "Generic Keyboard"
>>>> >> >> >> Driver "kbd"
>>>> >> >> >> Option "XkbRules" "xorg"
>>>> >> >> >> Option "XkbModel" "abnt2"
>>>> >> >> >> Option "XkbLayout" "br"
>>>> >> >> >> Option "XkbVariant" "abnt2"
>>>> >> >> >> EndSection
>>>> >> >> >>
>>>> >> >> >> Section "InputDevice"
>>>> >> >> >> Identifier "Configured Mouse"
>>>> >> >> >> Driver "mouse"
>>>> >> >> >> EndSection
>>>> >> >> >>
>>>> >> >> >> Section "Device"
>>>> >> >> >> Identifier "Configured Video Device"
>>>> >> >> >> EndSection
>>>> >> >> >>
>>>> >> >> >> Section "Monitor"
>>>> >> >> >> Identifier "Configured Monitor"
>>>> >> >> >> EndSection
>>>> >> >> >>
>>>> >> >> >> Section "Screen"
>>>> >> >> >> Identifier "Default Screen"
>>>> >> >> >> Monitor "Configured Monitor"
>>>> >> >> >> EndSection
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >> 2009/9/16 Rodolfo <rof20004@gmail.com>:
>>>> >> >> >> > amigo....pode ser que o driver de video da sua placa nao
>>>> >> >> >> > esteja
>>>> >> >> >> > instalado....então talvez o dri não esteja
>>>> >> >> >> > funcionando....como ai
>>>> >> >> >> > diz
>>>> >> >> >> > que
>>>> >> >> >> > ele esta inicializando deve ta dando esse erro.....faça o
>>>> >> >> >> > seguinte...ligue
>>>> >> >> >> > sua máquina......depois entre em qualquer terminal e logue
>>>> >> >> >> > como
>>>> >> >> >> > root...e
>>>> >> >> >> > digite as seguintes frases sem aspas.
>>>> >> >> >> >
>>>> >> >> >> > 1. "/etc/init.d/gdm stop"
>>>> >> >> >> >
>>>> >> >> >> > 2. "modprobe -r drm"
>>>> >> >> >> >
>>>> >> >> >> > 3. edite o arquivo /etc/modules/blacklist e acrescente no fim
>>>> >> >> >> > do
>>>> >> >> >> > arquivo
>>>> >> >> >> > o
>>>> >> >> >> > seguinte:
>>>> >> >> >> > "blacklist drm"
>>>> >> >> >> >
>>>> >> >> >> > Module Loader present
>>>> >> >> >> > Markers: (--) probed, (**) from config file, (==) default
>>>> >> >> >> > setting,
>>>> >> >> >> > (++) from command line, (!!) notice, (II)
>>>> >> >> >> > informational,
>>>> >> >> >> > (WW) warning, (EE) error, (NI) not implemented, (??)
>>>> >> >> >> > unknown.
>>>> >> >> >> > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16
>>>> >> >> >> > 09:32:17
>>>> >> >> >> > 2009
>>>> >> >> >> > (==) Using config file: "/etc/X11/xorg.conf"
>>>> >> >> >> > (II) Module "ddc" already built-in
>>>> >> >> >> > (II) Module "i2c" already built-in
>>>> >> >> >> > (II) Module "ramdac" already built-in
>>>> >> >> >> > (EE) GARTInit: Unable to open /dev/agpgart (No such file or
>>>> >> >> >> > directory)
>>>> >> >> >> > (EE) [drm] drmOpen failed.
>>>> >> >> >> > (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
>>>> >> >> >> > (EE) intel(0): Couldn't allocate video memory
>>>> >> >> >> >
>>>> >> >> >> > sobre essa mensagem acima edite o arquivo xorg.conf que fica
>>>> >> >> >> > em
>>>> >> >> >> > /etc/X11/xorg.conf e comente ou apague as linhas onde vc
>>>> >> >> >> > encontra
>>>> >> >> >> > isso:
>>>> >> >> >> >
>>>> >> >> >> > "ddc"
>>>> >> >> >> > "i2c"
>>>> >> >> >> > "ramdac"
>>>> >> >> >> >
>>>> >> >> >> > geralmente fica na seção "Modules".
>>>> >> >> >> >
>>>> >> >> >> > depois de feito tudo isso, ative o GDM novamente e veja se
>>>> >> >> >> > funciona.
>>>> >> >> >> >
>>>> >> >> >> > "/etc/init.d/gdm start"
>>>> >> >> >> >
>>>> >> >> >> > CTRL+ALT+F7
>>>> >> >> >> >
>>>> >> >> >> > e veja se aparece a interface gráfica....
>>>> >> >> >> >
>>>> >> >> >> > aguardo resultados
>>>> >> >> >> >
>>>> >> >> >> > 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>
>>>> >> >> >> >>
>>>> >> >> >> >> Esses aqui?
>>>> >> >> >> >>
>>>> >> >> >> >> # modprobe intel_agp
>>>> >> >> >> >>
>>>> >> >> >> >> e
>>>> >> >> >> >>
>>>> >> >> >> >> # /etc/init.d/gdm restart
>>>> >> >> >> >>
>>>> >> >> >> >> se funcionar,
>>>> >> >> >> >>
>>>> >> >> >> >> # echo 'intel_agp' >> /etc/modules
>>>> >> >> >> >>
>>>> >> >> >> >> Eu executei. Deu a mesma coisa..
>>>> >> >> >> >>
>>>> >> >> >> >> Abs
>>>> >> >> >> >>
>>>> >> >> >> >> 2009/9/16 Gunther Furtado <gunfurtado@gmail.com>:
>>>> >> >> >> >> > Olá,
>>>> >> >> >> >> >
>>>> >> >> >> >> > 2009/9/16 Fernando Xavier <fernando.xavier@gmail.com>:
>>>> >> >> >> >> >> Olá,
>>>> >> >> >> >> >>
>>>> >> >> >> >> >> Obrigado pela resposta. Executei o comando e deu isso:
>>>> >> >> >> >> >>
>>>> >> >> >> >> >>>
>>>> >> >> >> >> >>> # lsmod | grep agp
>>>> >> >> >> >> >>
>>>> >> >> >> >> >> agpgart 28776 1drm
>>>> >> >> >> >> >>
>>>> >> >> >> >> >> Quando tento reiniciar o gdm dá a mesma coisa. Coloco a
>>>> >> >> >> >> >> saída
>>>> >> >> >> >> >> completa do erro abaixo
>>>> >> >> >> >> >>
>>>> >> >> >> >> >
>>>> >> >> >> >> > O comando acima serve somente para determinar os módulos
>>>> >> >> >> >> > que já
>>>> >> >> >> >> > estejam carregados, não para corrigir qualquer erro, minha
>>>> >> >> >> >> > mensagem
>>>> >> >> >> >> > anterior pode ter dado outra impressão, desculpe. Tente
>>>> >> >> >> >> > executar
>>>> >> >> >> >> > os
>>>> >> >> >> >> > outros comandos e nos avise do resultado.
>>>> >> >> >> >> >
>>>> >> >> >> >> >
>>>> >> >> >> >> > [corte]
>>>> >> >> >> >> >
>>>> >> >> >> >> >>> # modprobe intel_agp
>>>> >> >> >> >> >>>
>>>> >> >> >> >> >>> e
>>>> >> >> >> >> >>>
>>>> >> >> >> >> >>> # /etc/init.d/gdm restart
>>>> >> >> >> >> >>>
>>>> >> >> >> >> >
>>>> >> >> >> >> > Abraço,
>>>> >> >> >> >> >
>>>> >> >> >> >> > --
>>>> >> >> >> >> > Gunther Furtado
>>>> >> >> >> >> > Curitiba - Paraná - Brasil
>>>> >> >> >> >> > gunfurtado@gmail.com
>>>> >> >> >> >> >
>>>> >> >> >> >> > "...agora, só nos sobrou o futuro...", visto em
>>>> >> >> >> >> > www.manuchao.net
>>>> >> >> >> >> >
>>>> >> >> >> >> >
>>>> >> >> >> >> > --
>>>> >> >> >> >> > To UNSUBSCRIBE, email to
>>>> >> >> >> >> > debian-user-portuguese-REQUEST@lists.debian.org
>>>> >> >> >> >> > with a subject of "unsubscribe". Trouble? Contact
>>>> >> >> >> >> > listmaster@lists.debian.org
>>>> >> >> >> >> >
>>>> >> >> >> >> >
>>>> >> >> >> >>
>>>> >> >> >> >>
>>>> >> >> >> >> --
>>>> >> >> >> >> To UNSUBSCRIBE, email to
>>>> >> >> >> >> debian-user-portuguese-REQUEST@lists.debian.org
>>>> >> >> >> >> with a subject of "unsubscribe". Trouble? Contact
>>>> >> >> >> >> listmaster@lists.debian.org
>>>> >> >> >> >>
>>>> >> >> >> >
>>>> >> >> >> >
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >> --
>>>> >> >> >> To UNSUBSCRIBE, email to
>>>> >> >> >> debian-user-portuguese-REQUEST@lists.debian.org
>>>> >> >> >> with a subject of "unsubscribe". Trouble? Contact
>>>> >> >> >> listmaster@lists.debian.org
>>>> >> >> >>
>>>> >> >> >
>>>> >> >> >
>>>> >> >>
>>>> >> >>
>>>> >> >> --
>>>> >> >> To UNSUBSCRIBE, email to
>>>> >> >> debian-user-portuguese-REQUEST@lists.debian.org
>>>> >> >> with a subject of "unsubscribe". Trouble? Contact
>>>> >> >> listmaster@lists.debian.org
>>>> >> >>
>>>> >> >
>>>> >> >
>>>> >>
>>>> >>
>>>> >> --
>>>> >> To UNSUBSCRIBE, email to
>>>> >> debian-user-portuguese-REQUEST@lists.debian.org
>>>> >> with a subject of "unsubscribe". Trouble? Contact
>>>> >> listmaster@lists.debian.org
>>>> >>
>>>> >
>>>> >
>>>>
>>>>
>>>> --
>>>> To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
>>>> with a subject of "unsubscribe". Trouble? Contact
>>>> listmaster@lists.debian.org
>>>>
>>>
>>
>
>
Reply to: