Re: Problemas com Pen Drive
Rayner Carvalho LIma escreveu:
Tente refazer a partição do pendrive.
Já aconteceu comigo e resolvi refazendo a partição do pendrive,
formatando em fat32.
Em Qua, 2009-08-19 às 16:38 -0300, João Olavo Baião de Vasconcelos
escreveu:
Veja a saída do comando:
# sudo fdisk -l
Veja se o pendrive está com a partição certinha...
On Mon, Aug 17, 2009 at 6:45 PM, Ricardo Esdra <riesdra@gmail.com>
wrote:
Cesar escreveu:
opa!
Ja testou com outro pen drive para ver se o problema
não é do hardware desse?
Cesar
então pessoal desculpe a demora, mas eu viajei terça e só cheguei hoje;
esta semana na maquina de um cliente que eu visitei que usa windows,
e copiei músicas para ele sem problemas, quanto a comentarem sobre
refazer as partições e formatar ele em fat, isto eu ja fiz tanto no windows
quanto no linux, e hoje ao conectar ele no linux, nem carregar ele carregou
deu erro, e isto aparece no dmesg:
[ 1831.433405] usb 6-5: new high speed USB device using ehci_hcd and
address 2
[ 1831.574214] usb 6-5: configuration #1 chosen from 1 choice
[ 1831.574856] usb 6-5: New USB device found, idVendor=0951, idProduct=1607
[ 1831.574859] usb 6-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1831.574861] usb 6-5: Product: DataTraveler 2.0
[ 1831.574863] usb 6-5: Manufacturer: Kingston
[ 1831.574864] usb 6-5: SerialNumber: 0014780F9A485A8A140A0007
[ 1831.653211] Initializing USB Mass Storage driver...
[ 1831.653211] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1831.657213] usbcore: registered new interface driver usb-storage
[ 1831.657213] USB Mass Storage support registered.
[ 1831.657213] usb-storage: device found at 2
[ 1831.657217] usb-storage: waiting for device to settle before scanning
[ 1836.660450] usb-storage: device scan complete
[ 1836.660450] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0
1.00 PQ: 0 ANSI: 2
[ 1836.662461] sd 4:0:0:0: [sdb] 15679488 512-byte hardware sectors
(8028 MB)
[ 1836.663059] sd 4:0:0:0: [sdb] Write Protect is off
[ 1836.663063] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1836.663065] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1836.666665] sd 4:0:0:0: [sdb] 15679488 512-byte hardware sectors
(8028 MB)
[ 1836.667303] sd 4:0:0:0: [sdb] Write Protect is off
[ 1836.667306] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1836.667308] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1836.667311] sdb: sdb1
[ 1836.787306] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1836.787353] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1842.227869] FAT: Unrecognized mount option "re" or missing value
[ 1842.283077] FAT: Unrecognized mount option "re" or missing value
[ 1846.650526] FAT: Unrecognized mount option "re" or missing value
[ 1846.663834] FAT: Unrecognized mount option "re" or missing value
[ 1860.622049] FAT: Unrecognized mount option "re" or missing value
[ 1860.634182] FAT: Unrecognized mount option "re" or missing value
quanto ao fdisk -l, me retorna isto:
Disk /dev/sdb: 8027 MB, 8027897856 bytes
255 heads, 63 sectors/track, 976 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x04030201
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 1 976 7839688+ b W95 FAT32
o mais estranho é que no windows eu consigo copiar dados para ele,
e no linux esta dando estes erros.
--
##############################################
# Ricardo Esdra #
# #
# linux user n° 446011 #
##############################################
Reply to: