A pasta que criei foi /TESTE, tudo maiúsculo mesmo!
Mudei para security = share e nada!
2009/6/5 Ricardo Esdra <riesdra@gmail.com <mailto:riesdra@gmail.com>>
2009/6/5 Allan Carvalho <allan@ceb.unicamp.br
<mailto:allan@ceb.unicamp.br>>
Italo Diego Teotonio escreveu:
Bom pessoal, tem menos de 1 mês q comecei a mexer com
Linux. Irei participar de uma competição de rede através
so Senai, pra quem conhece é a Olimpiada do COnhecimento.
Na olimpíada terei q colocar o Linux em rede com maquinas
WIndows. BOm, através de tutoriais na net configurei o
samba da maneira q postei abaixo. Porém meu objetivo era
compartilhar a pasta TESTE o q nao está acontecendo, não
funciona. O unico compartilhamento q aparece é o diretorio
home do usuario.
O q tem de errado na minha configuração?!
Aproveitando, tenho q compartilhar impressoras tbm, como
faço?!
Grato
Italo Diego Teotonio
MSN: italo--diego@hotmail.com
<mailto:italo--diego@hotmail.com>
<mailto:italo--diego@hotmail.com
<mailto:italo--diego@hotmail.com>>
SMB.CONF
#
# Sample configuration file for the Samba suite for Debian
GNU/Linux.
#
#
# This is the main Samba configuration file. You should
read the
# smb.conf(5) manual page in order to understand the
options listed
# here. Samba has a huge number of configurable options
most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the
command
# "testparm" to check that you have not made any basic
syntactic
# errors.
#
#======================= Global Settings
=======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba
server will part of
workgroup = senai
# server string is the equivalent of the NT Description field
server string = %h server
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to
enable its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a
WINS Client
# Note: Samba can be either a WINS Server, or a WINS
Client, but NOT both
; wins server = w.x.y.z
# If we receive WINS server info from DHCP, override the
options above.
include = /etc/samba/dhcp.conf
# This will prevent nmbd to search for NetBIOS names
through DNS.
dns proxy = no
# What naming service and in what order should we use to
resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP
address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 <http://127.0.0.0/8>
<http://127.0.0.0/8> eth0
# Only bind to the named interfaces and/or networks; you
must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your
Samba machine is
# not protected by a firewall or is a firewall itself.
However, this
# option cannot handle dynamic or non-broadcast interfaces
correctly.
; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to only log through syslog then set
the following
# parameter to 'yes'.; syslog only = no
# We want Samba to log a minimum amount of information to
syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If
you want to log
# through syslog you should set the following parameter to
something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin
a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will
require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/
htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before
enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to
know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
guest account = nobody
; invalid users = root
# This boolean parameter controls whether Samba attempts
to sync the Unix
# password with the SMB password when the encrypted SMB
password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux
system, the following
# parameters must be set (thanks to Ian Kahan
<<kahan@informatik.tu-muenchen.de
<mailto:kahan@informatik.tu-muenchen.de>
<mailto:kahan@informatik.tu-muenchen.de
<mailto:kahan@informatik.tu-muenchen.de>>> for
# sending the correct chat script for the passwd program
in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n
*password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for
password changes
# when requested by an SMB client instead of the program
listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
domain logons = yes
#
# The following setting only takes effect if 'domain
logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the
user's home directory
; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain
logons' is set
# It specifies the location of a user's home directory
(from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U
# The following setting only takes effect if 'domain
logons' is set
# It specifies the script to run during logon. The script
must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain
controller via the SAMR
# RPC pipe. The example command creates a user account
with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet
--disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# lpr(ng) printing. You may wish to override the location
of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
# When using [print$], root is implicitly a 'printer
admin', but you can
# also give this right to other users to add drivers and
set printer
# properties
; printer admin = @ntadmin
############ Misc ############
# Using the following line enables you to customise your
configuration
# on a per machine basis. The %m gets replaced with the
netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better
performance.
# See smb.conf(5) and
/usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the
linpopup package
# installed. The samba maintainer and the linpopup
maintainer are
# working to ease installation and configuration of
linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f"
"%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master
Browser. If this
# machine will be configured as a BDC (a secondary logon
server), you
# must set this to 'no'; otherwise, the default behavior
is recommended.
domain master = auto
# Some defaults for winbind (make sure you're not using
the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
;
; The following was the default behaviour in sarge
; but samba upstream reverted the default because it might
induce
; performance issues in large organizations
; See #368251 for some of the consequences of *not* having
; this setting and smb.conf(5) for all details
;
; winbind enum groups = yes
; winbind enum users = yes
#======================= Share Definitions
=======================
[homes]
comment = Home Directories
browseable = yes
# By default, the home directories are exported read-only.
Change next
# parameter to 'yes' if you want to be able to write to them.
writable = yes# File creation mask is set to 0700 for
security reasons. If you want to
# create files with group=rw permissions, set next
parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security
reasons. If you want to
# create dirs. with group=rw permissions, set next
parameter to 0775.
directory mask = 0700
# Restrict access to home directories
# to the one of the authenticated user
# This might need tweaking when using external
authentication schemes
valid users = %S
# Un-comment the following and create the netlogon
directory for Domain Logons
# (you need to configure Samba to act as a domain
controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following and create the profiles
directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain
controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
public = no
writable = no
create mode = 0700
# Windows clients look for this share name as a source of
downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows
print drivers.
# Replace 'ntadmin' with the name of the group your admin
users are
# members of.
; write list = root, @ntadmin
# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; writable = no
; locking = no
; path = /cdrom
; public = yes
[TESTE]
path = /TESTE
guest ok = yes
browseable = yes
writable = yes
printable = yes
creat mask = 0777
force create mode = 0777
# The next two parameters show how to auto-mount a CD-ROM
when the
# cdrom share is accesed. For this to work
/etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660
defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the
connection to the
#
# If you don't want to use auto-mounting/unmounting make
sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
Verifique se o diretório /TESTE existe, apenas uma ressalva, o
linux é case-sensitive, teste != TESTE.
Ao final da configuração, execute o testparm, ele irá
verificar se suas configurações estão corretas.
Outra ressalva, com a configuração security = user, o
diretório será compartilhado somente para usuários que possuem
conta no servidor de arquivos, caso você queira mudar o
compartilhamento pra todos você tem que setar security = share
--
Atenciosamente,
Allan Carvalho
"Para as lagartixas só posso dizer: treine muito e vire um
calango, e continue admirando os crocodilos."
"O MS Office não consegue ler os arquivos salvos em formato
OpenOffice, já o OpenOffice consegue ler os arquivos salvos em
formato MS Office, o engraçado disso é que é o OpenOffice que
não presta..."
--
To UNSUBSCRIBE, email to
debian-user-portuguese-REQUEST@lists.debian.org
<mailto:debian-user-portuguese-REQUEST@lists.debian.org>
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org <mailto:listmaster@lists.debian.org>
concordo com o Allan, acho que você criou a pasta de forma
diferente do /TESTE, e tem que ser igual.
--
Ricardo Esdra.