Re: aumentar resolução do X
Para que funcionasse com a resolução de 1440x900 a tela teria de ser
de 19". Acho que aí o máximo é de 1280x800.
2009/2/9 Ronaldo Reis Junior <chrysopa@gmail.com>:
> Pessoal,
>
> tenho um Dell Latitude E6400 com tela 14 wide. estou testando para ver se
> funciona com resolução de 1440x900, mas não consigo e não sei se é por não
> suportar ou por falta de configurar algo corretamente. Se alguem tiver alguma
> dica? Eu ainda acho que esta minha placa não é bem suportada pelo meu
> sistema, mas não sei se é verdade.
>
> Minha placa de video é:
>
> 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
> Controller Hub (rev 07)
> Subsystem: Dell Device 0233
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information <?>
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
> Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
> Subsystem: Dell Device 0233
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
> Memory at e0000000 (64-bit, prefetchable) [size=256M]
> I/O ports at ef98 [size=8]
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [d0] Power Management version 3
>
> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
> Integrated Graphics Controller (rev 07)
> Subsystem: Dell Device 0233
> Flags: bus master, fast devsel, latency 0
> Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: [d0] Power Management version 3
>
> Meu xorg.conf está assim:
>
> # xorg.conf (X.Org X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool, using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the xorg.conf manual page.
> # (Type "man xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # If you have edited this file but would like it to be automatically updated
> # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "kbd"
> Option "XkbRules" "xorg"
> Option "XkbModel" "abnt2"
> Option "XkbLayout" "br"
> Option "XkbVariant" "abnt2"
> EndSection
>
> #Section "InputDevice"
> # Identifier "Configured Mouse"
> # Driver "mouse"
> # Driver "synaptics"
> #EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "synaptics"
> # Option "SHMConfig" "true"
> # Option "SendCoreEvents" "true"
> Option "Device" "/dev/psaux"
> Option "Protocol" "auto-dev"
> Option "LeftEdge" "120"
> Option "RightEdge" "830"
> Option "TopEdge" "120"
> Option "BottomEdge" "650"
> Option "FingerLow" "14"
> Option "FingerHigh" "15"
> Option "MaxTapTime" "180"
> Option "MaxTapMove" "110"
> Option "EmulateMidButtonTime" "75"
> Option "VertScrollDelta" "20"
> Option "HorizScrollDelta" "20"
> Option "CornerCoasting" "1"
> Option "CoastingSpeed" "3"
> Option "MinSpeed" "0.3"
> Option "MaxSpeed" "0.75"
> Option "AccelFactor" "0.015"
> Option "EdgeMotionMinSpeed" "200"
> Option "EdgeMotionMaxSpeed" "200"
> Option "UpDownScrolling" "1"
> Option "CircularScrolling" "1"
> Option "CircScrollDelta" "0.1"
> Option "CircScrollTrigger" "2"
> EndSection
>
>
> Section "Device"
> Identifier "Configured Video Device"
> # Driver "i810"
> Driver "intel"
> # Driver "nv"
> # BusID "PCI:0:2:0"
> VideoRam 256000
> Option "DPMS"
> # Option "RenderAccel" "TRUE"
> Option "DRI"
> # Option "AllowGLXWithComposite" "true"
> # Option "monitor-VGA" "Samsung"
> # Option "monitor-LVDS" "Dell"
>
> EndSection
>
> Section "Monitor"
> Identifier "Configured Monitor"
> Option "DPMS"
> HorizSync 30.0 - 110.0
> VertRefresh 50.0 - 150.0
> DisplaySize 300 190
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Monitor "Configured Monitor"
> Device "Configured Video Device"
> DefaultDepth 24
> SubSection "Display"
> Depth 16
> Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
> Depth 24
> Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
> Depth 32
> Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> # InputDevice "Synaptics Touchpad"
> # Option "AIGLX" "on"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> --
> Many a family tree needs trimming.
> --
>> Prof. Ronaldo Reis Júnior
> | .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional
> | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia
> | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil
> | `- Fone: (38) 3229-8192 | ronaldo.reis@unimontes.br | chrysopa@gmail.com
> | http://www.ppgcb.unimontes.br/lecc | ICQ#: 5692561 | LinuxUser#: 205366
> --
> Favor NÃO ENVIAR arquivos do Word ou Powerpoint
> Prefira enviar em PDF, Texto, OpenOffice (ODF), HTML, or RTF.
>
>
> --
> To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: