aumentar resolução do X
Pessoal,
tenho um Dell Latitude E6400 com tela 14 wide. estou testando para ver se
funciona com resolução de 1440x900, mas não consigo e não sei se é por não
suportar ou por falta de configurar algo corretamente. Se alguem tiver alguma
dica? Eu ainda acho que esta minha placa não é bem suportada pelo meu
sistema, mas não sei se é verdade.
Minha placa de video é:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
Subsystem: Dell Device 0233
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device 0233
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at ef98 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [d0] Power Management version 3
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
Subsystem: Dell Device 0233
Flags: bus master, fast devsel, latency 0
Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Meu xorg.conf está assim:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
EndSection
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Driver "synaptics"
#EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "synaptics"
# Option "SHMConfig" "true"
# Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "CornerCoasting" "1"
Option "CoastingSpeed" "3"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.015"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "i810"
Driver "intel"
# Driver "nv"
# BusID "PCI:0:2:0"
VideoRam 256000
Option "DPMS"
# Option "RenderAccel" "TRUE"
Option "DRI"
# Option "AllowGLXWithComposite" "true"
# Option "monitor-VGA" "Samsung"
# Option "monitor-LVDS" "Dell"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
DisplaySize 300 190
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
Depth 24
Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
Depth 32
Modes "1440x900" #"1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "Synaptics Touchpad"
# Option "AIGLX" "on"
EndSection
Section "DRI"
Mode 0666
EndSection
--
Many a family tree needs trimming.
--
> Prof. Ronaldo Reis Júnior
| .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional
| : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia
| `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil
| `- Fone: (38) 3229-8192 | ronaldo.reis@unimontes.br | chrysopa@gmail.com
| http://www.ppgcb.unimontes.br/lecc | ICQ#: 5692561 | LinuxUser#: 205366
--
Favor NÃO ENVIAR arquivos do Word ou Powerpoint
Prefira enviar em PDF, Texto, OpenOffice (ODF), HTML, or RTF.
Reply to: