Problemas na instalação do Debian - HD SATA + IDE
Saudações.
Após tentar instalar o Debian 4.0r3 DVD (com checksum correto) o
sistema não subia e aparecia uma
shell mais ou menos assim: "GRUB_". Só isso. Tentei instalar com
diversos tipos de particionamento,
mas o problema persistia.
#Minhas mídias de armazenamento:#
disk:
/dev/sda SAMSUNG HD082GJ SATA (onde tentei instalar)
/dev/hda Maxtor 6E040L0 IDE
/dev/sdb HP Photosmart 7400
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/hda1 Partition
/dev/hda2 Partition
cdrom:
/dev/hdb HL-DT-STDVDRRW GSA-4166B
floppy:
/dev/fd0 Floppy Disk
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 12 96358+ 83 Linux
/dev/sda2 13 9729 78051802+ 8e Linux LVM
Disk /dev/hda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/hda1 * 1 510 4096543+ 7 HPFS ou NTFS
/dev/hda2 511 4998 36049860 83 Linux
#Meu Hardware:#
cpu:
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+,
2109 MHz
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+,
2109 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice USB Optical Mouse
printer:
/dev/usb/lp0 7450
graphics card:
Micro-Star International VGA compatible controller
sound:
Micro-Star International Audio device
storage:
Floppy disk controller
Micro-Star International IDE interface
Micro-Star International IDE interface
network interface:
lo Loopback network interface
eth0 Ethernet network interface
sit0 Network Interface
disk:
/dev/sda SAMSUNG HD082GJ
/dev/hda Maxtor 6E040L0
/dev/sdb HP Photosmart 7400
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/hda1 Partition
/dev/hda2 Partition
cdrom:
/dev/hdb HL-DT-STDVDRRW GSA-4166B
floppy:
/dev/fd0 Floppy Disk
usb controller:
Micro-Star International USB Controller
Micro-Star International USB Controller
bios:
BIOS
bridge:
nVidia ISA bridge
nVidia PCI bridge
eth0 Micro-Star International Bridge
nVidia PCI bridge
nVidia PCI bridge
nVidia PCI bridge
AMD K8 [Athlon64/Opteron] HyperTransport
Technology Configuration
AMD K8 [Athlon64/Opteron] Address Map
AMD K8 [Athlon64/Opteron] DRAM Controller
AMD K8 [Athlon64/Opteron] Miscellaneous Control
hub:
Linux 2.6.18-6-k7 ohci_hcd OHCI Host Controller
Linux 2.6.18-6-k7 ehci_hcd EHCI Host Controller
Genesys Logic USB Hub
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Timer
RTC
Keyboard controller
/dev/lp0 Parallel controller
PS/2 Controller
nVidia RAM memory
Micro-Star International SMBus
Micro-Star International RAM memory
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
/dev/ttyS0 16550A
HP Photosmart 7400 series
Só foi possível instalar (sda) e subir o Debian, desinstalando
fisicamente o hda IDE (maxtor), ficando assim:
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 12 96358+ 83 Linux
/dev/sda2 13 9729 78051802+ 8e Linux LVM
Na verdade, não sei se isso é um "bug" e como faço para reportá-lo, em
português, de preferência.
Obs.: Essa instalação ocorreu com sucesso em um Fedora 8; provavelmente
é problema no Kernel.
Abraço à todos.
Reply to: