Partição Sumiu
Pessoal
Não sei o q ocorreu, mas tenho um servidor com 4
partições. Por obra do divino uma partição sumiu.
Notem que a partição /apl não consta e estava definida
em /dev/sdb1 Como pode ser constatado no fstab.
Como está agora:
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 2.4G 1.7G 653M 73% /
/dev/sda1 15M 3.5M 10M 26% /boot
/dev/sda4 1.4G 591M 736M 45% /home
FSTAB
/dev/sda1 /boot ext2 defaults
1 1
/dev/sda2 swap swap defaults
0 0
/dev/sda3 / ext3 defaults
0 0
/dev/sda4 /home ext3 defaults
0 0
/dev/sdb1 /apl ext3 defaults
0 0
/mnt/cdrom /mnt/cdrom supermount
ro,dev=/dev/cdrom,fs=iso9660 0 0
/mnt/floppy /mnt/floppy supermount
rw,dev=/dev/fd0,fs=vfat 0 0
none /proc proc defaults
0 0
none /dev/pts devpts
gid=5,mode=620 0 0
/dev/cdrom /mnt/cdrom
iso9660 noauto,owner,kudzu,ro 0 0
O que pode ter ocorrido? Que soluções posso executar
para identificar o que ocorreu e traze-la de volta?
Ah, coloco um trecho do DMESG pra analise.. notei que
o segundo disco nao respondeu.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 6.2.4
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7,
16/253 SCBs
Vendor: HP Model: 4.26GB A 80-LXY4 Rev: LXY4
Type: Direct-Access ANSI SCSI
revision: 02
Vendor: HP Model: 4.26GB A 80-LXY4 Rev: LXY4
Type: Direct-Access ANSI SCSI
revision: 02
Vendor: ARCHIVE Model: Python 02779-XXX Rev: 6500
Type: Sequential-Access ANSI SCSI
revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 8
scsi0:A:1:0: Tagged Queuing enabled. Depth 8
Attached scsi disk sda at scsi0, channel 0, id 0, lun
0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun
0
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset
8, 16bit)
SCSI device sda: 8330543 512-byte hdwr sectors (4265
MB)
Partition check:
sda: sda1 sda2 sda3 sda4
(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset
8, 16bit)
sdb: Spinning up
disk...........................................................
............................................not
responding...
SCSI device sdb: 8330543 512-byte hdwr sectors (4265
MB)
sdb:SCSI disk error : host 0 channel 0 id 1 lun 0
return code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 0
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 2
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 4
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 6
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 0
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 2
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 4
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 6
unable to read partition table
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 228k freed
Adding Swap: 128512k swap-space (priority -1)
EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,3), internal
journal
LVM version 1.0.1-rc4(ish)(03/10/2001) module loaded
loop: loaded (max 8 devices)
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 0
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 2
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 4
SCSI disk error : host 0 channel 0 id 1 lun 0 return
code = 8000002
Info fld=0x300d0101, Current sd08:10: sense key
Hardware Error
I/O error: dev 08:10, sector 6
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,4), internal
journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20020205, bufsize 32768, wrt 30720, max
init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 3, lun
0
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by
Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
PCI: Found IRQ 11 for device 00:08.0
eth0: OEM i82557/i82558 10/100 Ethernet,
00:A0:C9:B1:5E:E9, IRQ 11.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 690106-001, Physical connectors
present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
Grato,
Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
http://br.mail.yahoo.com/
Reply to: