k3b dando erro
Vi que a pouco surgiu uma dúvida dessas na lista, comigo o k3b chegou a gravar parte dos dados, e depois finalizou com erro, estava gravando umas mp3. Parece que depois de um certo volume ele para de ler (ou gravar) mandei gravar testando antes e sempre dá erro, vou testar outras mídias.
Debian Testing (2.6.18-3-486) KDE 3.5
Segue o Log, mais alguma info de digam.
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.18-3-486
Devices
-----------------------
HL-DT-ST DVDRRW GWA-4161B 1.00 (/dev/hdd, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version:
3.5.27
Wodim version: 1.1.1
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRRW GWA-4161B'
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1146880 = 1120 KB
Drive DMA Speed: 80640 kB/s 458x CD 58x DVD
FIFO size : 2097152 = 2048 KB
Speed set to 7056 KB/s
Track 01: data 702 MB
Total size: 807 MB (79:57.96) = 359847 sectors
Lout start: 807 MB (79:59/72) = 359847 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 7
Is not unrestricted
Is not erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11646 (97:26/54)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 10
Manufacturer: Lead Data Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2
Starting to write CD/DVD at speed 40.0 in dummy SAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 702 MB written.
Track 01: 1 of 702 MB written (fifo 100%) [buf 91%] 0.5x.
... Aqui os dados vão se repetindo
Track 01: 654 of 702 MB written (fifo 96%) [buf 91%] 25.7x.
Track 01: 655 of 702 MB written (fifo 100%) [buf 85%] 23.3x.
Errno: 0 (Success), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 05 1E D7 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.022s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 687257600 bytes
Writing time: 372.330s
Average write speed 12.9x.
Min drive buffer fill was 6%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.007s
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=40 -dao -dummy driveropts=burnfree -eject fs=2m -data /tmp/kde-gean/k3b_image.iso
mkisofs
-----------------------
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.14% done, estimate finish Fri Jan 26 01:18:47 2007
( .... pra economisar espaço)
99.91% done, estimate finish Fri Jan 26 01:19:51 2007
Total translation table size: 0
Total rockridge attributes bytes: 16192
Total directory bytes: 32768
Path table size(bytes): 446
Max brk space used 21000
359847 extents written (702 MB)
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Deep Purple 1 -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gean/k3b0qzxob.tmp -rational-rock -hide-list /tmp/kde-gean/k3bqpeosa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-gean/k3biItmNa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-gean/k3bnH0Iea.tmp
Reply to: